Used Elco Burner for sale (1,691)

Condition: used, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually Bodpfxsi Hc S De Aa Eoct fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Technical information according to the manufacturer - without guarantee!

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Bsdpfxjxt Sgts Aa Ejct

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 9,421 h, Make of engine: Hino Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW40 - Bucket 1800mm - 2 piece boom - Piping for hammer and sorting grab - HD version - Extra counterweight Bjdpev R Sx Isfx Aa Eoct - Trimble GPS system (without receivers and screen) - Central grease system - Cab overpressure unit

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 00103, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, cutting length (max.): 100 mm, cutting height with scoring (max.): 90 mm, saw blade diameter: 400 mm, cutting height (max.): 110 mm, total length: 7,500 mm, total height: 1,700 mm, total width: 6,600 mm, overall weight: 7,700 kg, input voltage: 380 V, compressed air connection: 7 bar, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Bedpfx Aajxwqlpj Esct

Condition: used, Year of construction: 2009, Field of application: Construction Delivery terms: EXW Production country: JP Please contact Christiaan Dekker for more information Bsdpfx Aaewcgike Ejct Boom sections for Kobelco CKE1800 & CKE2000 9 meter sections including ropes & pins

Condition: used, Light barrier, safety light curtain , Reflective light barrier, light barrier, safety light curtain, reflective light barrier, photoelectric sensor, light sensor, light grid -Manufacturer: Telco, light grid Sitrans Alpha receiver bar R8-K32-46-A45-G71-S1-R 2 pieces Ovp .: 0479412290 Stadler ID 6130729 Bcedpfx Ajr Htnnsa Est -Quantity: 79 boxes available -Price: per box -Box dimensions: Ø 67 x 1755 mm -Weight: 3.1 kg/carton

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Bsdpfx Aajiwlz Ae Ejct Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Condition : very good Location : Warehouse Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: new, Year of construction: 2023, New machine Bcodpfjw I U D Ejx Aa Est Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal saw cuts: -via scale from 0 - 2,070 mm -via strip cutting stop from 75 - 500 mm Measurement readout for vertical saw cuts: -via scale from 0 - 1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Features: -ADVANCE clamping system, consisting of 2 pneumatic clamping tongs that can be motor-driven up and down on vertical axes with a ball screw spindle. The clamps support panels up to 150 kg. -Torsion-resistant, free-standing machine frame -Round bar guides, vertical and horizontal -Pneumatically retractable slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting stop -Manual programming rail with 5 T-slots -Pneumatic plunge for the saw unit -25 material support rollers -1 infeed and 1 outfeed roller -Pneumatic workpiece clamping device between support rollers -3 center support elements, pneumatically extendable -Pneumatic saw head lock -Operator panel with document holder -Control unit on saw assembly: start button, stop button -Tool cabinet -Scale illumination for vertical saw cuts Partnership Edition features: -Digital display for folding stop -Digital display for saw unit with incremental function -Pneumatically tiltable saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment, and activation indicator -5.5 kW motor including star-delta starter -Cutting line laser Availability: short-term Location: Hochheim

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Bcsdpohvm Diofx Aa Ejt Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes

Condition: used, functionality: fully functional, power: 147.84 kW (201.01 HP), fuel type: diesel, overall weight: 31,500 kg, Year of construction: 2006, operating hours: 8,700 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Kobelco/New Holland E305 Crawler Excavator Bcedpfewf H Huox Aa Eot Year of manufacture: 2006 Operating hours: approx. 8,700 Engine power: 148 kW/201 hp Dimensions: 10,320 mm x 2,990 mm x 3,170 mm Weight: 31,500 kg Track width: 600 mm Undercarriage 70% good MONONOOM Demolition grate roof and front We expressly reserve the right to make input errors and mistakes in this offer. The specific agreements in the order confirmation or purchase contract are solely authoritative. More construction machinery and mixing plants on our website

Condition: used, TECHNICAL DETAILS - Inside dimensions : 500 x 400 x 500 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1000 x 700 [mm] Bsdpfx Aaeuk Nv Te Eoct - Machine height : 1500 [mm] - Machine weight : 165 [kg]

Condition: used, Starter Delko-Remy -Voltage: 12 V -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 Bedpsd N N Dhefx Aa Esct -Dimensions: 305/180/120 mm -Weight: 11.5 kg

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Equipment: Double head paper driller Bcodpswvuubofx Aa Est Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: used, Year of construction: 2023, Cutting length ca. 5300 mm Bcodpfxjvwfcaj Aa Ejt Cutting height ca. 2150 mm

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Bcsdpfx Aaomt Hhwe Ejt Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Bjdpfx Aajuc Idxs Ejct Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, Year of construction: 2018, operating hours: 8,300 h, * Kobelco SK210 NLC-10 crawler excavator * Year of manufacture 2018 * 8300 h * 124 KW Hino engine * 22400 kg * OQ 70 quick coupler fully hydraulic * Track width 280 cm * Chain plates 60 cm Bjdpfxevm Na Ij Aa Eoct * Bucket 130 cm * All lines * Automatic air conditioning * 180 degree camera

Condition: used, Bosch alternator Bedpod N N Dljfx Aa Esct -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm -Weight: 4.6 kg

Condition: used, The Elcos Double Head Paper Driller, manufactured by Elcos, is currently in stock and located in Germany. This machine features a drill distance of 45 to 150 mm and includes two adjustable heads. The delivery terms are FCA. Equipment: Details 2 head paper driller with adjustable heads Bjdpfx Aaevfxzfj Eoct Drill distance 45 - 150 mm

Condition: new, Technical description:Cutting height: vertical: 0 - 2,150 mm, horizontal: 80 - 2,050 mmCutting length: 5,300 mmCutting depth: 80 mm (with clamps: 55 mm)Saw blade: diameter 303 mm, bore 30 mm, Z = 60 hollow roof toothRotation of the saw blade: 5,000 or: 4 kW (S 6)Required air pressure: 6 barMeasurement readout for horizontal saw cuts:- using a scale from 0 - 2,070 mm- using a strip cutting stop from 75 - 500 mmMeasurement readout for vertical saw cuts:- on a scale from 0 - 1,300 mmExtraction nozzle: 1 x 100 mm 1 x 120 mmEquipment features:- ADVANCE clamping system, consisting of: 2 pneumatic clamping pliers,the motorized on vertical axes on a recirculating ball screw from abovemove down. The tongs carry plates with a weight ofmax. 150 kg- Torsion-free, free-standing machine frame- Round rod guide, vertical and horizontal- Pneumatically evasive slatted frame- Finely adjustable folding stop with stop extension- Fine adjustment for horizontal saw cuts via handwheel- Strip cutting stop- Manual programming rail with 5 slot nuts- Pneumatic immersion of the saw unit- 25 material support rollers- 1 feed roller and 1 feed roller- Pneumatic workpiece clamping device between the support rollers- 3 central support elements, pneumatically folding out- Pneumatic saw head locking- Control panel with template holder- Switch unit on the saw unit: start button, stop button- Tool cabinet- Illumination scale for vertical saw cutsOrder number: ELCO0001 / S013Scope of delivery:Equipment package I, consisting of:- Digital display for the folding stop- Digital display for the saw unit with incremental function- pneumatically swiveling saw unit- Scoring system with controlled counter air nozzle, numerical displayfor setting the scoring or groove depth and activating lightOrder number: ELCO0191 / S085 Bedpovwf Hlsfx Aa Ejct

Condition: good (used), Year of construction: 1980, functionality: fully functional, total width: 2,400 mm, total length: 22,400 mm, total height: 2,400 mm, temperature: 700 °C, number of chambers: 5, Tunnel belt kiln used in our company for firing prints on glass. The kiln consists of 5 heating sections and a cooling sleeve. Each heating section is equipped with a G-Lehrs gas burner and two heat distribution engines of 1.5 kW each. In total, there are 10 electric motors in the entire kiln, and the kiln also has one engine with a gear to drive the mesh belt with a power of also 1.5 kW. Bedpfx Aaov N Hawj Ejct Each section has an individual temperature setting, i.e. we are able to set the firing curve for a given assortment. The kiln was modernized by G-Lehrs, which changed the type of power supply from electric to gas - propane. In 2019, a thorough repair was carried out, which involved replacing the internal walls with new heat-resistant sheets and filling with ceramic mat up to 1260 ° C.

Condition: good (used), NUMERICALLY CONTROLLED PANEL SAW WITH AUTOMATIC LOADING  Brand: BIESSE SELCO  Model: EBT 120 L, CE  Availability: Immediate Description:  Solid, reliable and versatile panel sawing centre, able to satisfy the needs of all types of customers: from the small company looking for maximum simplicity in use, to the medium-sized company that works on multiple shifts or that wants to automate the process, up to the large company that works in batches.  Base: The single-shoulder structure makes the carriage/base assembly extremely compact. The guides are fixed to the base along their entire length to ensure maximum linearity of the stroke. The blades rise on prismatic recirculating ball guides that ensure perfect perpendicularity with the work surface, resulting in an excellent cutting finish.  Carriage and blade travel on prismatic guides: maximum rigidity and perpendicularity of the blade to the panel stack. Drastic reduction of friction and wear of materials, even at the highest speeds. Maximum stability over time of the linearity of the travel and the characteristics of the structure.  Presser: the openings made in the pressing bar eliminate the interference zone with the clamps allowing complete use of the panels with small tail cuts and trims as desired.  Blade carriage: The transmission of motion to the blade carriage carried out with a pinion/rack offers greater fluidity of translation and a better cutting finish  Material parking: by moving the tables it is possible to create a parking area for machined pieces and bars outside the cutting line. Technical characteristics: • Cutting dimensions mm. 4,400 x 2,200 • Lifting table dimensions mm. 4,960 x 2,270 • Blade projection mm. 122 • Blade diameter mm. 430 • Scoring diameter mm. 300 • Blade carriage speed m/min. 0-130 • Pusher speed m/min. 60 max with Bruschless motors • Pusher stroke mm. 5,240 • Total installed power Kw28 • Operating pressure Bar 7 • Suction nozzles: 1 x 200mm. - 1 x 150mm. – 2 x 100mm. • Machine dimensions 8,788 x 7,198 mm. Bodjvvb Agspfx Aa Ejct • Machine weight KG 7,500 • Machine documentation: use and maintenance manual, software manual, spare parts catalogue, wiring diagram, CE declaration of conformity. Optionals: • Lateral aligner with two pressure elements • Comb stop for material with protruding edge • Loading lift table • Front aligners for automatic loading • Front air curtain tables no. 4 • Pneumatic grippers no. 7 • The blade protrusion is automatically adjusted based on the thickness of the pack to have maximum precision even when cutting a small number of panels • Electronic adjustment of the scoring blade • The alignment of the scoring blade with respect to the main blade is carried out from the outside of the machine body, with the blades in motion and in absolute safety • Quick and safe blade change with pneumatic locking device

Condition: used, machine/vehicle number: 007930, Max. panel width: 4500 mm Max. panel length: 2200 mm Bsdjwgkulopfx Aa Eect Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, functionality: limited functionality, Year of construction: 1992, machine/vehicle number: GM00193, Equipment: cabin, crane, hydraulics, USED KOBELCO HYDRAULIC CRAWLER CRANE MANUFACTURE: KOBELCO MAXIMUM CAPACITY: 45TON GOOD WORKING CONDITION Max. capacity 45 TON Main boom foot pin horizontal offset X 950MM Max. slewing speed 5RPM Max. line speed 70 m/min Bcjdpjul Ukxofx Aa Est Max. torque 580 Nm at 1600 rpm Boom erecting up to 80° in - seconds MACHINE SOLD AS IT IS CONDITION FOR MODE DETAILS PLEASE CONTACT VIJAY JPN INDUSTRIAL TRADING PTE LTD 13A PANDAN CRESCENT SINGAPORE - 128478

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2004, operating hours: 5,240 h, machine/vehicle number: YA01-00297, Equipment: cabin, Product Description Used Crane For Construction Manufactured by Kobelco Model CK90UR Year 2004 Hour 5240 hr Bcjdpoul U Ahefx Aa Ejt Operates on Diesel Engine Machine sold as its condition More information please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478