Used Eks 310 for sale (2,458)

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 2,298 h, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH ECE 310 * EX * Atex - 3G / Zone 2 Mast: 1F850 ID: 23052.5935 Category: Used Bjdpfx Aaezuty Rj Iodh Mast: 1F850 Forks: 1150 mm Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Hours: 2298 hours Year: 2017 Capacity: Complete NEW * 24v / 465ah * Year of manufacture 2026 Options: * EX * Atex - Jungheinrich !!!! System REF = E211103 / 2017 Gas = IIB Type = Cat 3G (approved for Zone 2) Temperature class = T3 (+5C-Ta-+40C) Also includes accompanying control panel. New battery.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit Bdsdozuyp Espfx Aa Ieh - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Bdsdpfjzuyhhox Aa Ieh Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 8038938456C, turning length: 450 mm, turning diameter over cross slide: 505 mm, turning diameter: 202 mm, spindle motor power: 10,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ Bdsdewk E Uzopfx Aa Ijh The machine its full functional, but have some miner isue.

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. New saw blade installed. Saw table dimensions: width 57 cm, depth 78 cm Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Bedpfx Aeyh H Rbsa Ijdh Payment in cash or in advance. Sale to commercial customers only, no warranty or liability.

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 712 h, fuel type: electric, Manufacturer + model: JUNGHEINRICH ECE 310 * EX * Atex Jungheinrich - 3G / Zone 2 Mast: 1F850 ID: 22081.5936 Category: Demo Mast: 1F850 Fork length: 1150 mm Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Year: 2017 Hours: 712 hours Battery: Complete NEW * 24v / 465ah * Year: 2026 Options: * EX * ATEX - Jungheinrich !!!! System REF = E211104 / 2017 Gas: IIB Type: Cat 3G (For use in Zone 2) Bdodpjzuty Dsfx Aa Ijh Temperature class: T3 (+5C-Ta-+40C) Also features side-mounted controls.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: FN531056, load capacity: 1,000 kg, empty load weight: 2,727 kg, lifting height: 3,810 mm, construction height: 2,430 mm, operating hours: 239 h, Jungheinrich EKS 210 high-lift order picker, year of manufacture 2017 with duplex mast Bdodpfey H Exrox Aa Ijh Specifications: Jungheinrich EKS 210 Year of manufacture: 2017 Recorded operating hours (h): 239 Mast type: Duplex Lift height (mm): 3810 Free lift (mm): 850 Overall height (mm): 2430 Load capacity (kg): 1000 Fork length (mm): 900 Own weight (kg): 2727 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2017 Battery capacity (Ah): 465 Battery voltage (V): 48

Condition: used, Year of construction: 2007, turning diameter 200 mm turning length 393 mm control Siemens 810D Bedozzfbyepfx Aa Iedh weight of the machine ca. 3200 kg

Condition: used, mileage: 241,262 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 7,200 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2014, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Bedpfez H Na Ujx Aa Iodh Configuration: 4x2, Payload: 1272 kg, Tare weight: 2228 kg, Gross vehicle weight: 3500 kg, Unbraked trailer load: 750 kg, Braked trailer load, center axle: 2000 kg, Cabin type: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Lighting type: Halogen lamp, Bluetooth, Engine power: 70 kW (94 hp), Fuel: Diesel, Euro standard: 5, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and lengthened, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L3H2 Maxi Post NL Interior, Automatic, Euro 5, 95 hp!, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: VK-070-B Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth, left: 4 mm; Tire tread depth, right: 4 mm Axle 2: Tire tread depth, left: 1 mm; Tire tread depth, right: 4 mm Weights Unladen weight: 2,228 kg Payload: 1,272 kg GVW: 3,500 kg Functional Loading platform height: 59 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Electrical connection 61 kW Bsdpfx Aaoy Ryx Uj Iodh Jointing device at the bottom and top Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Condition: good

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Bjdsyu Nb Ejpfx Aa Iedh Height: 400mm Weight: 240kg

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Colour: Grey Weight: 9.800 kg - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information Bdjdoyf Hpzepfx Aa Ish VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2019, condition: ready for operation (used), A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible. Bdsdpfxjzhb Ezj Aa Ioh

Condition: used, functionality: fully functional, Pinheiro AMA2 310 multi-blade crawler saw Track width: 310 mm Cutting width: 305 mm Cutting height: 95 mm Bdedpfeycvy Rex Aa Ish Blade size: 250-350 mm Feed rate: 7-45 m/min Total power: 24.6 kW

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Bdodpjzrt Ipjfx Aa Ijh Machine lighting

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° Bdjdsx D I H Rspfx Aa Ish • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec • Repeatability: 10 arc-sec • Max rotation: 999.999° (with rotary control) • Resolution: 0.001°

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,362 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,100 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 16 x 6 -8, overall weight: 3,288 kg, total height: 2,050 mm, total length: 2,100 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 316 K 110-310 ZZ – Electric 4-wheel forklift Bdedpfx Aajz Aprxs Ieh TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.100 mm Closed height: 2.050 mm Free lift: 1.400 mm Mast: Duplex (2F310) Fork length: 1.100 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2016 Charger: Dreiphasig 48 V 100 A Tyres: Superelastik SE 18 x 7 - 8 (70%) / 16 x 6 -8 (70%) Service weight: 3.288 kg Length: 2.100 mm Width: 1.070 mm Year of manufacture: 2017 Operating hours: 10.362 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308624 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2000, Description to follow! Bdodpfez Ebqpex Aa Ioh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,434 h, load capacity: 1,500 kg, lifting height: 3,100 mm, free lift: 1,470 mm, fuel type: electric, mast type: duplex, construction height: 2,040 mm, battery capacity: 500 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 140/55-9, overall weight: 3,045 kg, total height: 2,040 mm, total length: 1,800 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 215 GE115-310 ZZ – Electric 3-wheel forklift Bodez Apq Iepfx Aa Iedh TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.100 mm Closed height: 2.040 mm Free lift: 1.470 mm Mast: Duplex (2F310) Fork length: 1.150 mm Fork carriage: FEM 2A Drive: Elektro Battery: 48 V/500 Ah (2017) Charger: 48 V - not tested Tyres: Superelastik 18x7-8 (70 %) / 140/55-9 (30 %) Service weight: 3.045 kg Length: 1.800 mm Width: 1.080 mm Year of manufacture: 2017 Operating hours: 10.434 h Condition: working condition EQUIPMENT 3rd valve, Front work lights ATTACHMENTS Sideshift Internal no.: 1308799 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2014, Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Bjdoznh Nmspfx Aa Iodh Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, continuously adjustable: 20 - 90 m/min Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: excellent (used), mileage: 932,527 km, power: 228 kW (309.99 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 10,300 mm, total width: 2,600 mm, Year of construction: 2012, WJME2NNH404393034 Cool unit brand: Carrier = More information = Technical information Number of cylinders: 6 Engine capacity: 7.790 cc Rear axle 1: Lift axle Weights Empty weight: 11.820 kg Carrying capacity: 15.180 kg GVW: 27.000 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-XL-87 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Bdsdpfoymqggjx Aa Ioh Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. Bsdpeyx N Hqefx Aa Iedh In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Bjdpozdkphefx Aa Iedh

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Bdsdpfx Aajyzxa Es Ieh Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Bedpsyg Eu Sofx Aa Isdh Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment