Used Dust Exhaust for sale (7,097)

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment Bwsdoz Ikyrspfx Ap Iow • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 2016, Year of production: 2016 Voltage: 400 V / 50 Hz Motor power: 2 x 3 kW Air volume: 10.000 m3/h Filter area: 76 m2 Bwsdpfjixtlrsx Ap Iew Number of filters: 4 pieces Max. pressure: 2800 Pa Size: 2050 x 1515 x 2910 mm Weight: ca. 980 kg

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits Bjdefz Dqmspfx Ap Ieww • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning Bsdpfx Apefz Dqxj Ieww • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits Bwjdpofz Dq Asfx Ap Iow • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption Bwjdpfx Apefz I R Rs Iow • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: used, Mobile Dust Extraction Fritz Moeller Bwsdpfxoddxl Es Ap Ijw

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ Bwedpfx Asggx E Dsp Isw ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Increased accuracy available on request Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors Bodpfxsg Ewk Rs Ap Ioww - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Force/Torque: 19.3 Nm/bar -Speed: from 5 to 500 rpm -Max. pressure: 315 bar Bedpfxjb A Hrdj Ap Ijww -Swallowing volume: 1265 cm³/rev -Dimensions: 500/500/H550 mm -Weight: 246 kg

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Overall Dimensions: Width: 1200 mm Depth: 600 mm Height: 1560 mm Inlet Size: 90 mm Outlet Size: 115 mm Equipped with a pneumatic valve Bwodpfxsyzmihj Ap Iew

Condition: used, Dust Collector, Dust Separator, Dust Extraction Filter Unit EX Explosion-Proof FDI HCH, Used machine Bjdpjzm Rzvjfx Ap Isww Manufacturer: FDI Type: HCH216/1000 Year of manufacture: 2004 Weight: 460 kg Condition: Used, heavy-duty industrial EX explosion-proof design Overall dimensions: 2100 x 1700 x 1800 mm

Condition: used, Fan, Centrifugal Fan, Exhaust Fan, Used Machine Bwodpfx Aezi Ui Njp Iow Overall dimensions: 760 × 820 × 1040 mm Electrical specifications: 10 kW; 380 V; 16.7 A Inlet connection Ø: 410 mm Outlet connection: 195 × 315 mm Airflow : 10 000 m3/h

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. Bwjdpj Afyn Hofx Ap Ijw • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Roller conveyor & safety devices • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 300 kg, construction height: 1,950 mm, Technical condition: very good Bodpfjymt Hcox Ap Isww

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Bwjdpfxen Nw Nte Ap Iow Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Bwjdpfx Apouc U N Uj Iew Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: used, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit Bwedeul H Ebepfx Ap Isw -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading Bsdpfoup Difsx Ap Ioww REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: used, Year of construction: 1984, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! Bwodpfx Apju Nv Ube Isw *

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Bodpfxjx H Iylj Ap Isww Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Chip conveyor

Condition: excellent (used), Year of construction: 2013, load capacity: 16 kg, Robot complete with control cabinet, teach panel, and connection cables. Fully functional and can be inspected under power on site. Bwodpfx Aox U Tb Djp Ijw

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Bwodeyvt Exopfx Ap Isw Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Manufacturer: De Dietrich (France) Model: GT 517 Year of manufacture: 1995 Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Bwsdpfx Apsyntqwj Iew Heat flow: 761–978 kW Maximum operating temperature: 120°C Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Bjdpfx Asx I N A Dsp Isww Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included