Used Dowel for sale (360)

Condition: good (used), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 11,945 mm Number of bays per racking row: 04 units, each 2,880 mm Number of levels plus base level: 04 units Cjdoi D Em Aepfx Afqogw Included in the scope of supply: 05x Pallet racking uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (welded frame) 6,640 mm high 870 mm deep 32x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per beam pair: 1,600 kg with evenly distributed load 64x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out 20x Heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-bolt installation: M 12-13/95 10x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 80 x 220 mm

Condition: good (used), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 26,770 mm Number of bays per racking row: 09 units, each 2,880 mm Number of levels plus base level: 04 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled Cgodpfxei D Engs Afqsw (welded frame) 6,640 mm high 870 mm deep 72x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per pair of beams 1,600 kg with evenly distributed load 144x Safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting 40x Heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-bolt mounting: M 12-13/95 20x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 80 x 220 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 12.020 mm Number of bays / row of shelves: 04 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load Cedpfx Ajm Nchkefqsgw 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.980 mm Number of bays / shelf row: 06 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 07x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 36x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair Cjdpfx Afem Rghtjqjgw 1.600 kg with evenly distributed load 72x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 14x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Uprights: 2000x1100 mm / Beams: 4000 mm / Bay load: 0.7 tons We offer you a new/used pallet racking system from the manufacturer Stow for sale. Codpfxjh Ayxpj Afqogw Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 20,600 mm Number of bays per racking row: 05 units, each 4,000 mm Number of levels including base level: 02 units The scope of delivery includes: 06x Pallet racking uprights, new Material color: RAL 5015 blue Profile dimensions: 100 x 65 x 2 mm Profile type: PLFB 15 Incl. cross and diagonal braces, Base plates The uprights are unassembled (bolted frame) 2,000 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB0480 Agraffe: 4 HK (hooks) Clear width: 4,000 mm Max. load per pair of beams: 700 kg, with evenly distributed load (see conditions for bay load) 4-5 holes per beam, Ø 3 - 4 mm 40x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting 24x Heavy-duty dowels, new Manufacturer: MKT Design: galvanized steel Approved for: non-cracked concrete Through-mounting: M 12-13/95 Diameter: M 12 Borehole Ø x depth: 12 x 75 mm Setting depth: 67 mm Anchoring depth: 50 mm Dowel length: 95 mm Thread: M 12 x 50 mm Clamping thickness: 13 mm Package contents: 25 pieces Weight per package: 2.33 kg 12x Shims, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and bay loads, manufacturer and batch number Technical properties: Hard PVC signs, screen printing process Dimensions: 80 x 220 mm Material thickness: 1 mm The bay load is max. 700 kg, provided that the following conditions are met: - Frame type at least PLFB15 - Buckling length max. 1,300 mm - At least 2 beam pairs per bay - At least 5 bays per row - The specifications are only valid and permitted for evenly distributed loads.

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.980 mm Number of bays / shelf row: 06 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 07x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 36x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load Csdpjm Nchnefx Afqegw 72x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 14x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 12.020 mm Number of bays / row of shelves: 04 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high Cgodpfx Afom Rghpjqow 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.600 mm Number of bays / shelf row: 07 pcs á 2.400 mm Number of levels plus floor level: 03 pcs. Included in delivery: 08x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 42x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.400 mm max. load per truss pair 2.400 kg with evenly distributed load 84x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out Cgodpfx Asmxlniofqsw 32x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 16x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: not inspected (used), 1 telescopic drawer cabinet, 9 drawers, complete with a stock of dowels, cable labels, adhesive tapes, Wargo clips, and hand tools. Cjdpfjzg D Hrox Afqogw

Condition: not inspected (used), Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Cgedpfx Aewunwyefqjw Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine Csdpfxsb A Iiae Afqogw -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 1x quill processing units available Price: per piece -Weight: 25 kg/piece

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical Csdsyyqnfopfx Afqegw press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Cgjdpfxszdf Ute Afqow Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Codpfsfi U E Dox Afqsgw Weight completely approx. 1750 kg with Demag chain hoist Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Cedpfx Aozb Du Hsfqsgw Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Cgodpfxewd U U Do Afqew Location:

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Csdpow Tfzfofx Afqjgw

Condition: used, Year of construction: 2023, New exhibition machine: List price €4,271 net Standard equipment: - Thread cutting device Cedjx Hwp Nopfx Afqjgw - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically angled front - LED lighting - Quick-adjust and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Emergency stop mushroom button - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with Schuko plug - 3-year warranty for single-shift operation Technical data: Spindle: B16 Drilling depth (mm): 60 Maximum thread cutting capacity (depending on pitch): up to M10 Digital speed display Digital drilling depth display Drilling depth stop: positive-locking ring Manual feed Table height adjustment via rack and pinion Motor: Three-phase, frequency-controlled Power supply: 230 V (kW): 0.54 Continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable table surface (W x L) (mm): 300 x 250 Distance spindle – work surface (mm): max. 750 Center offset (mm): 20 T-slot size, spacing (mm), number: 2, 125 Dimension width (mm): 13/26 Spindle speed stepless electric (rpm): 40–4,000 Machine dimensions (mm): Without safety cover: 420 x 540 x 1,780 With safety cover: 572 x 936 x 2,142 Weight (kg): 85 Incl. drilling package 1 #296590: Machine vice Flott [felix] 2.0 80 and quick-release drill chuck 1–13 mm (accuracy 0.17 mm) Location: Rieth

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz Codjy Saw Hopfx Afqogw - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Year of construction: 2014, BIESSE Bre.Ma VEKTOR 15-13 CNC Drilling and Insertion Machine Art. No. BCDR14530 Manufacturer: BIESSE / Bre.Ma Model: VEKTOR 15-13 Year of manufacture: 2014 Description: The Bre.Ma VEKTOR 15-13 is a vertical CNC-controlled drilling and insertion machine designed for precise machining of panel materials of various sizes. Thanks to its compact design and ergonomic configuration, it ensures top processing quality while requiring minimal floor space. The machine is specifically designed for flexible production requirements—ideal for furniture manufacturers and subcontractors focusing on custom batch sizes. Technical Data: • Model: VEKTOR 15-13 • Year: 2014 • Serial number: BCDR14530 Cgedpfxsxwd I Ro Afqew • Control: CNC • Installed power: 11 kW • Air consumption: approx. 200 NL/min • Extraction capacity: approx. 4,500 m³/h • Air pressure: 6–7 bar • Workpiece thickness: up to 80 mm • Max. workpiece width: 1,300 mm • Min. workpiece size: 240 × 40 × 8 mm • Turret tool changer: 10 positions • Spindle speed: up to 18,000 rpm • Weight: approx. 2,800 kg Field of Application: Vertical processing of furniture and cabinet components: drilling, milling, grooving, glue injection, and dowel insertion in a single pass. Ideally suited for industrial production lines with automated part handling. Highlights: • Compact design requiring minimal floor space • Superior processing quality due to vertical panel orientation • 10-position turret tool changer (NC-controlled, < 2 seconds) • Laser-based zero-point detection system • Optional integration into production lines with robot systems (ROS) • Full compatibility with Biesse SmartConnection and Sophia IoT system

Condition: used, machine/vehicle number: 005449, Position 1: Panel Tipper MORBIDELLI-FLEXA 912+FLEXA 902 Position 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Cgodpewucl Eofx Afqew Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902

Condition: excellent (used), Catalogue number 7979 Cgedpjzcc Rvefx Afqow TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Cgjdoyzg Udopfx Afqsw Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input frequency: 50 Hz, working width: 1,200 mm, For sale: Throughfeed drilling and dowel inserting machine LAZZONI Group – model Next 2+3K, designed for efficient series production of furniture components. The machine is equipped with automatic infeed and outfeed of workpieces, allowing for single-operator use and significantly reducing production costs. Key Information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Cedpfeywxy Rsx Afqogw Control: PLC + operator panel (HMI) Functions: Drilling + automatic dowel insertion Working width: 230–1200 mm Working height: 10–22 mm Working depth: 40–260 mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2900 kg CE certificate Working Configuration: - Number of heads: 5 - 2 side heads - 3 top heads - Total number of spindles: 35 (7 spindles per head) - Spindle pitch: 32 mm - Throughfeed operation – ideal for repeatable parts Automation and Ergonomics: - Infeed magazine - Outfeed magazine (no need for a second operator) - Automatic dowel insertion - Fast retooling/changeover - Stable and repeatable operation for large production runs Applications: - Drawer side production - Furniture carcass components - Fronts, sides, rails - Ideal for both large factories and smaller businesses focusing on automation The machine is in good working condition, has been used in serial production, and is available for inspection onsite. Loading assistance available. Location: Elbląg Net price: 25,000 PLN

Condition: good (used), Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating system – Programming of manual and automatic anuba inserting – Inserting of single, anuba – Step by step execution Installed electrical power 7,62 Kw Cgodpoy Eg T Ujfx Afqjw Compressed air 6-7 atm Machine Overall dimensions m 4400 x 1600 x 1600 h Weight kg 1650 Electrical cabinet overall dimensions mm 1050 x 550 x 1100 h Weight kg 390