Used Double Wheel Grinding Machine for sale (83,744)

Condition: used, Year of construction: 1995, grinding length 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal man. max. 750 mm horizontal table movement: cross max 340 mm sanding disc diameter 355 mm Nedpfx Aozkv Ayoqwjlf table load max. 420 kg grinding wheel width 50 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min weight of the machine ca. 2500 kg dimensions of the machine ca. ca. 2800x2000x1800 mm

Year of construction: 2014, condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Nedov Suftopfx Aqwolf

Condition: good (used), Hardly used Elektra-Beckum double bench grinder with stand and container, in good, fully functional condition. Shipping not possible Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only possible by prior telephone arrangement! Subject to change, interim sale, and errors. Nledszwk Tyopfx Aqwof

Year of construction: 2009, condition: ready for operation (used), A G+H precision cylindrical grinding center is available. Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, X/Z feed rate: 8m/min, workhead taper: MT4, tailstock quill stroke: approx. 35mm, tailstock taper: MT4, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm, max. speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. grinding wheel diameter: 100mm, filter capacity: 300l, filter flow rate: 100l/min, chuck: three jaw chuck, chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg, operating hours: approx. 350h. Including chuck, magnetic fixture and dressing unit. Documentation vorhanden. An on-site inspection is possible. Nljdpfx Ajzlt Ntjqwsf

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Nledev Exthjpfx Aqwef

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Nedpfxey Dibxj Aqwslf Translated with (free version)

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Nljdjzwgrlepfx Aqwjf Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Nlodsw Avrzspfx Aqwsf Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Optional AE sensor for gap detection or touch dressing

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: WEISS CNC, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Nledpezvt Iqofx Aqwsf Centre width : 650 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:650 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 500x60 mm Workpiece headstock: Speed:10 -650 rpm Workpiece weight max.:250 (100) kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:20 - 50 m/s Grinding disc dimensions right:500 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:700 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter:50 mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: ready for operation (used), Year of construction: 1989, Gear grinding machine NILES ZSTZ 10 H Table diameter: 1000 mm Max. working diameter: 1250 mm Module: - Min.: 2 - Max.: 25 Max. helical angle: 45 degrees Max. workpiece weight: 4000 kg Nsdpfx Aqozk E U Eewjlf Number of teeth: 10-250 mm Dimensions: 7700x4540x3320 mm Machine weight: 30 tons A set of change gears is available. Video of the machine in operation is available!

Condition: good (used), Year of construction: 1988, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm grinding wheel diameter 500 x203,2 x 50-100 mm Nlodjzu A Siopfx Aqwof total power requirement 12 KvA weight of the machine ca. 4,7 t dimensions of the machine ca. 3,3 x2,0 x 1,8 m - Includes belt filters - Includes grinding wheels

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Nledoxfknaspfx Aqwjf

Condition: ready for operation (used), A Wassmer surface grinding machine for the pre-grinding process in brick production is available. Stages: 1, wheel diameter: 700mm, feed speed: approx. 5m/min, drive: belt. An on-site inspection is possible. Nedpfx Aqjyr Rw Njwelf

Condition: used, Year of construction: 2008, total height: 2,000 mm, total length: 3,500 mm, total width: 2,500 mm, overall weight: 5,600 kg, Machine Number: 209311 Control System: LC Control with Touch Panel Travel Paths: X: 1000 mm Y: 600 mm Z: approx. 700 mm distance table–spindle center Nedpfxoy S Nile Aqwolf Magnetic Clamping Plate: 1000 x 500 mm - Electro-Permanent Table Load Capacity: approx. 1000 kg Spindle: Power: 7.5 kW (optional 18 kW) - Speed Control Grinding Wheel: 400 x 60 (100) x 127 mm Table Speed: 2 – 60 m/min Cross Feed: 2 – 60 mm/pulse - continuous up to 5 m/min Equipment: Belt Filter System Coolant System Partial Enclosure Dressing Unit Electrical Connection: 400 V / 50 Hz approx. 100 A Dimensions (LxWxH) approx.: 3500 x 2500 x 2000 mm Grinding length: 1,000 mm Grinding width: 700 - mm Weight approx.: 5,600 kg Grinding height: 600 - mm Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM Nlsdjzu Nphspfx Aqwef - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Year of construction: 2013, condition: ready for operation (used), A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible. Nlsdpfxowwllgo Aqwjf

Condition: used, Year of construction: 2005, Junker cylindrical grinding machine, type EJ 10 Year of manufacture: 2005 Control system: Siemens 810 Center distance: 150 mm Center height: 100 mm Maximum workpiece weight: 5 kg Maximum grinding wheel diameter: 400 mm Maximum grinding wheel width: 63 mm Nodpfx Ajznx Hcoqwolf Grinding wheel bore: JUNKER spindle arbor 27 mm This offer is exclusively directed to commercial enterprises within the meaning of §14 of the German Civil Code (BGB).

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h Nedpfozuzc Tox Aqwolf - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Nodpjzt Si Usfx Aqwslf Simultaneous machining via 2 handwheels

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Njdpfx Aqsxcblqswslf centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Nlodpfx Aqjzlg Szswef Model: 108

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm Nlodpov Hqlrofx Aqwsf • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: new, Year of construction: 2026, functionality: fully functional, New double miter band saw machine, equipped with a frequency converter. Suitable for cutting various materials. Nljdpfx Aozu Db Eoqwof

Condition: used, Surface Grinding Machine HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Nledezwgr Espfx Aqwef Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Condition: repair required (used), Year of construction: 1981, grinding length: 6,600 mm, grinding width: 300 mm, grinding height: 260 mm, table width: 550 mm, grinding spindle motor power: 52,000 W, We are offering this Göckel G 80 eL surface grinding machine, manufactured in 1981, which requires repair. Nlsdpfezvqh Uex Aqwef Manufacturer: Gustav Göckel Maschinenfabrik GmbH D-6100 Darmstadt Machine type: G 80 eL Serial number: 6062 If you have any questions or would like more information, please feel free to send us a message or call us. - Grinding length: 6600 mm - Width: 550 mm - Magnet width: 300 mm - Grinding width: 520 mm - Grinding height: 260 mm - Grinding height at right angles: 150 mm - Grinding motor: 52 KW Please note: the machine is delivered without a water tank. Pumps, hoses, and accessories are included.