Used Double End Trim Saw for sale (39,963)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm Bjdpfx Abeq Ii Dlsbelr max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: good (used), Used for plastic profiles Max. cutting length 3200 mm Blodpfswdfqpex Abbor Further details available upon request

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm Bsdpfexl Ecxsx Abbolr • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI TTSA - Automatic loader - Control panel - Min / max working length 240/1200 mm Blsdpfjwrh N Dox Abbor - Maximum tenon size 100x30 mm - Production: 1200 tenons/hour (600 pieces/hour) - Tool rotation 9,000 rpm - Total installed power 9 kw

Year of construction: 2012, condition: refurbished (used), 6" TWIN TAC90 Double Cold Saw, made by OTO MILLS Year : 2012 / Revamping 2025 Tube range: - Rounds 48 – 170mm - Squares 50x50 – 150x150 - Rectangle 60x40 – 200x100 - Thickness range : 1.5 – 10,0 mm Blsdovtpnxjpfx Abbjr Speed : 90 m/min Scope of supply: - OTO MILLS TAC90 DF Twin Cold Saw - Electrical cabinet with ELTAV.5 CNC Positioning system - Operator control panel with HMI - Hydraulic group - First section of roller conveyor - Safety fences and protections Tube range: Rounds 48 – 170mm / Squares 50x50 – 150x150 / Rectangle 60x40 – 200x100 Thickness range: 1.5 – 10,0 mm Speed: 90 m/min

Condition: excellent (used), functionality: fully functional, AUTOMATIC DOUBLE MITRE SAW model OMS SALVARANI INVINCIBILE OK 330 second hand machine working conditions : very good for cutting wood, frames, pvc, aluminium, plastics and various materials oil pneumatic downstroke of the blade groups inclination of cutting blade groups + / - 45° Bljdswqdqnepfx Abbjr n.02 motors . power Hp 3 each one blades diam. mm. 330 max. useful cutting length mm.3500 min. useful cutting length mm.350 max. useful cutting width 90° mm. 165 x 115 H max. useful cutting width 45° mm. 115 x 115 H volt. 380/50 weigth kgs. 700 volt. 380/50

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: Blodpsi Ezwmofx Abbsr min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Max saw height: 70 mm Blsdom Sghxspfx Abbjr Blade diameter: 350 mm With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site Bedpfx Abjxl Eadjbjlr

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm Bsdsmxktpopfx Abbslr - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 - Year 2003

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, A Plasmek Plastic Makinalari LM500 W6-P wrapping machine is for sale due to lack of use. The machine has virtually zero operating hours and has not been used. All parts and accessories are included. Bsdpow H Rpvjfx Abbjlr

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder Bledpfeh R Tvtox Abber double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW Bsdpfx Abowrw D Rsbslr cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Bsdpfowzavusx Abbolr Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Bjdpfx Aodfx Hcjbbjlr • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2004, condition: ready for operation (used), SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - touch screen NC control - with loader CSF Bljdpoinbk Refx Abbjr - safety net - S/N 800 - CE rules (year 2004) - RECONDITIONED

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928 A, working width: 250 mm, Equipment: documentation/manual, Motor Power: 30 kW Equipped with: Hnebni Iow A A E Is Rp Tot 1+1 saws 1+1 milling unit Bodpjxix Tfsfx Abbslr 1+1 drilling unit Max length: 1000 mm Max width: 250 mm Max thickness: 50 mm double end tenoner, double drilling, step by step

Condition: refurbished (used), EVERY TYPE OF CELASCHI FEEDING CHAIN FULLY RECONDITIONED Bsdpfx Ajv Hmyxebbelr

Condition: used, Double rip saw IDL000811 - max width: 2500 mm - electric cabinet Bedpfx Abju At Tbobolr - manufacturer: Tegle/norway

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser and video monitoring 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New Bjdpfx Abswwam Esbslr

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Blsdpfxed Akyge Abbjr Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Year of construction: 1996, machine/vehicle number: 518, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - Working length mm. 1200 - Max tenon length 100 mm Bledpsrnnmpofx Abbsr - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF2 - Nc ISAC - Perimetral net - Volt. 380/50 - Year 1996

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, OMS FC330R Double Mitre Saw for Wood, Aluminium 2 x 2.2 kW Specification: • Condition – used, after maintenance/service • Manufacturer – OMS • Model – FC 330 R • Main motors – 2 x 2.2 kW • Hydraulic-pneumatic control • Max. cutting length – 351 cm • Min. cutting length – 36 cm • Max. cutting cross-section – 70x160 mm (at right angle) • Max. blade diameter – 330 mm • Extraction ports Ø 60 mm • Cutting angle range from -45 to +45 degrees (right, left) • Vertical clamps for the workpieces Bljdpfxjxdxkgo Abbor • Weight – approx. 600 kg • Overall dimensions – 405 x 100 x 145 cm (L x W x H) Additional information: • Very good, factory technical condition • The photos show the actual condition of the item for sale • Machine can be powered up and tested on site

Condition: excellent (used), Year of construction: 1989, "CELASCHI" mod. TSA 200 AUTOMATIC DOUBLE END TENONER With the following features: n° 1 + 1 pneumatic scoring units HP 1,5 with drive belts - 6000 rpm. n° 1 + 1 hogging units HP 5,5 with drive belt 6000 rpm. n° 1 + 1 shaping units HP 5,5/7 - 3000/6000 rpm. Max. working width : 3000 mm. Bsdpjvi N Rfsfx Abbolr Variable feed sped from 3 to 18 mt/minute SECOND-HAND, IN GOOD CONDITIONS

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm Blsdpfx Abswmg Saobsr maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW