Used Double End Miter Saw for sale (22,181)

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides Dsdpfxjztr Rre Abvewb ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Dwedpfezl N Tnex Abveb Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. Dwodju Nigwspfx Abveb microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 1994, Technical details: Dwjdpfeu Nigkjx Abvob saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Hydro-pneumatic blade feed Adjustable blade feed speed Dwodeztb Hpjpfx Abvjb Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Condition: good (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 500 mm, Double mitre saw Pertici 500F2K, capable of double cuts, saw blade diameter 500 mm, positioning via machine control, Dodpfx Aozfmkwjbvswb horizontal and vertical clamping units, seal holder.

Year of construction: 2023, condition: new, functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- Djdpjtdgitefx Abvewb Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96 (negative tooth angle) Cutting height approx. 80 mm, Miter setting left/right +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 HP), 380 volts, 50 Hz, pneumatic feed system with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast iron table extension on the right with stop slider and measuring scale 0 - 3,000 mm without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, excluding transport, subject to prior sale. Djdpozbr Uzofx Abvowb

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. Dwsdjy Erzdspfx Abveb 2x HITACHI SEIKI CNC lathes

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Dwodpfx Abszraaxjvob Input table automatic (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 Dwsdpfjyv Aa Sox Abveb 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: good (used), Year of construction: 1997, Double miter saw RAPID DGS 200 Year of manufacture 1997 Drive: 2 x 2.2 kW, 400 V Swiveling range, manual: 45° to 90° Dwjdpfx Abohctt Ejvob Saw blade: 420 mm Ø Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment: manual Length display: digital Air pressure: 7 bar Profile support: fixed on the outside, movable in the center Dimensions (L/W/H): 5200/1200/1500 mm Weight: 800 kg

Year of construction: 2000, condition: used, machine/vehicle number: 97464, cutting length: min./max. bei 90° 330/5000 mm disk of circular saw-Ø: 450/500 mm min. cutting length at 90°: 330 mm space needed: 6760 x 1590 x 1700 mm weight: 1550 kg Dwodpfx Aj Uir Ejbveb

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg Dwjdpfsz E Snox Abvjb

Condition: new, 0 3350 mm Working height bei 90° = 180 mm 0 45°/90°/45° 0 Dsdpfxoy I Dclj Abvswb Cutting height at 45° 140 mm

Condition: new, mm Working height bei 90° = 315 mm Dwodpfx Aey I Dcfsbvsb 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm

Condition: new, mm Working height bei 90° = 290 mm 0 45°/90°/45° 0 Dwsdpfjy I Db Usx Abvob weight 1800 kg Cutting height at 45° 210 mm

Condition: good (used), Double mitre saw Manufacturer: Haffner Model: DGS 180 Year of manufacture: N.A., approx. 1990 Dwedpfx Aox Hgu Isbvsb Cutting length: 3,400 mm Saw blade diameter: 330 mm Power: 2 x 1.1 kW Speed: 2,800 rpm Tilting: 45°, 90° Swivelling: -45°, 90°, +45°

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Cutting width 210 - 2500 mm Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location Dwjdpfxjy Ef Hyj Abvob

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min Dwsdpedbp Eqefx Abvjb space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm Dwjdpocu Dvujfx Abveb weight: ca. 900 kg

Condition: used, CNC multi-blade saw for non-ferrous metals, MIKSITZ Year of manufacture: 1991 Circular saw, aluminum circular saw, table saw, miter saw For cutting and notching aluminum profiles Blade stroke: 500 mm Dededzp Snspfx Abvewb Maximum cutting height: 100 mm Blade speed: approx. 5000 rpm Installed blade diameter: 300 mm Maximum blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 volts, 50 Hz Table size: 1100 x 1100 mm Table cutout: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Multiple saw blades can be mounted on a working shaft with bearings on both sides - A long milling arbor SK40 serves as the working shaft - Belt drive between the drive motor and the saw shaft - Table height adjustable via crank (for cutting depth) - Fixtures and stops can be mounted on the table - Blade stroke via ball screw with servomotor - Single-axis CNC control for the cutting movement, LENORD + BAUER, type GEL 7541.0000 - Adjacent control cabinet Space requirement: L x W x H 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request Dsdpfeyxlqrjx Abvowb We are happy to prepare a quotation tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Djdpfx Abov Nktbevjwb The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable Dodpfxeb Nrg Uj Abvowb 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left