Used Dorstener Wire Works for sale (52,712)

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Fsdjzv H Tyepfx Aa Isgh Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2021, operating hours: 1,750 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6260 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1750 hours Battery: 48v / 750ah * Year of manufacture: 2021 Fsdpfozv Rywsx Aa Ijgh Options: - Very Narrow Aisle (VNA) truck - with Wire Guidance, in complete and like-new condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working area X: 3855 mm Working area Y: 2650 mm Working area Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Fodpoz Atb Rofx Aa Iogh Worktable with 6 stops 250 m3/h vacuum pump, manufactured in 2023 Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective nets Approximate weight: 6300 kg. Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin Fgjdpfxex I H Rxe Aa Ish -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: used, Wire electrode, welding wire, welding wire, cored wire Fgsdpfeqxd D Nox Aa Ish -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 4.0 kg

Condition: used, Wire electrode, welding wire, welding wire, cored wire Fgjdpfx Aasq Awauj Ish -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg

Condition: excellent (used), Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg Fsdpecgqdqsfx Aa Iegh -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Condition: good (used), Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm -Quantity: 1 roll 15 kg 1 roll approx. 5 kg -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg Fgedpfx Aofnr Itja Ijh

Condition: used, mileage: 133,000 km, power: 132 kW (179.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,200 mm, total width: 2,360 mm, total height: 3,670 mm, Year of construction: 2009, Equipment: ABS, soot filter, 1st owner. Perfectly maintained and consistently well-cared-for vehicle from a government agency. Fsdpfxeyrk A So Aa Iogh German truck, recently passed inspections with only a few operating hours. Valid DGUV (German accident prevention regulations) until 12/2026 and TÜV (German vehicle inspection) until 11/2026. Extensively inspected by a Ruthmann service technician in December 2025, shortly before its scheduled decommissioning, and declared "ready for use." In December 2025, a complete inspection was carried out, including lubrication, maintenance, and replacement of minor parts such as signs and membrane keypads. The vehicle was recently used for maintaining public lighting. A new vehicle has now been purchased. Until then, the aerial platform was in full operation. The TÜV inspection on the truck was renewed at 132,918 kilometers, with validity "without any apparent defects" until November 2026. Chassis: MAN TGL 8.180 with leaf spring suspension. Euro 4 engine. 6-speed manual transmission ZF Ecolite. Registered as a "self-propelled working machine, aerial platform." Unladen weight only 5835 kg. Therefore, a large payload reserve is available, and heavy materials can still be carried in the equipment compartments. Permissible total weight: 7490 kg. Wheelbase 3600 mm. Driver's seat, comfort version with air suspension. 3 seats in total. Yellow rotating beacons. Minor signs of wear from the years are present, but no significant damage. This is an excellent-running truck. All documentation from RUTHMANN is included in the original (operating manual with parts list, inspection book, all inspection reports from recent years). Working height approximately 13 m. Lateral reach 8.20 m. Basket load capacity: 200 kg (2 people plus materials). Basket size: 1300 mm long / 1000 mm wide / 1100 mm high. The basket is made of plastic. Insulation against 1000 volts. Compressed air blow-out gun in the basket. This offer is only valid for commercial enterprises or government agencies. Subject to prior sale and errors. The net price for this excellent Ruthmann aerial platform is 22,500 euros!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Fgodpfxozlc Tbo Aa Ioh

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 1,825 h, lifting height: 11,950 mm, empty load weight: 6,550 kg, Telescopic articulated boom lift MANITOU 120 AETJC Year of manufacture: 2009 According to the meter reading: 1,825 operating hours 11.95 meters working height 9.95 meters platform height Fgodpfx Aaez Dvdhe Ijh 7 meters lateral reach 200 kg payload 6,650 kg weight - Telescopic arm - Articulated arm - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine - On request: new Austrian inspection certificate provided before delivery! Selling price: €7,700 net Affordable delivery also possible!

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Fedpfx Aaez Affne Iogh Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2019, operating hours: 7 h, For sale: a scarcely used personnel lift. Working height: 9.7m, load capacity: 160kg. It can be transported in a lying position and fits into a standard van; one person can load it onto the vehicle. Dimensions: 0.74 x 1.24 x 1.97. Fsdpfx Asz Ihzgoa Iogh

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Fodpfx Aoixxwmsa Ijgh Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; Fedpjtz H Egofx Aa Isgh * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm Fodpfx Aoux Si Hja Ijgh 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, Equipment: cooling unit, documentation/manual, Special Offer – 5% Discount Available! EDM32 Wire EDM Machine The EDM32 Wire Electrical Discharge Machine is a precision CNC machine designed for electro-erosion machining of electrically conductive materials. It is an ideal solution for toolmaking, mold manufacturing, and the production of precision components requiring high dimensional accuracy and excellent surface finish. The machine efficiently cuts complex profiles and intricate geometries in both single-piece and serial production. Its rigid construction and optimized machining parameters ensure reliable performance, excellent repeatability, and high productivity. The EDM32 supports taper cutting up to ±6°, allowing greater machining flexibility. It uses wire diameters from 0.12 to 0.25 mm, enabling highly accurate machining of demanding workpieces while achieving a surface finish of 1.6–2.5 Ra, minimizing the need for secondary finishing operations. With a maximum table load of 400 kg, the machine is capable of machining heavy workpieces without compromising precision. Main Features • High-precision wire EDM machining • Suitable for complex profiles and intricate geometries • Taper cutting up to ±6° • High machining accuracy and repeatability • Excellent surface finish • Stable machine construction • Low operating costs • CE certified Fodpfjy A N Ezsx Aa Ijgh Technical Specifications • Model: EDM32 • Table travel: 440 × 350 mm • Table size: 380 × 650 mm • Maximum cutting height: 400 mm • Wire diameter: 0.12–0.25 mm • Taper cutting: ±6° • Maximum cutting speed: 120–150 mm²/min • Surface roughness: 1.6–2.5 Ra • Machining power: 2 kW • Wire speed: 11 m/s • Maximum table load: 400 kg • Machine dimensions: 1650 × 1150 × 1700 mm • Machine weight: 1150 kg Applications • Mold and die manufacturing • Toolmaking • Precision metalworking • Production of complex and high-accuracy components • Prototype and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 4,663 h, empty load weight: 14,500 kg, Manufacturer: Aichi Type: SP21 AJ / 12-4903 Year: 2008 Capacity (t): 227 kg Fodez Aqxgepfx Aa Ijgh Hours: 4,663 h Maximum working height: 23.00 m Maximum platform height: 21.00 m Maximum horizontal reach: 18.60 m Weight: 14,500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, empty load weight: 6,970 kg, Manufacturer: Haulotte Type: HA12CJ Year: 2012 Capacity: 250 kg Fgodpfsz Aq E Tox Aa Ioh Hours: 1,445 h Working height: 11.70 m Platform height: 9.70 m Platform dimensions: 1.15 x 0.80 (m) Total weight: 6,970 kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,379 h, Manufacturer: GSR Model: E200T Comfort X Year: 2016 Fgjdez Argrepfx Aa Ieh Capacity: 250 kg Mileage: 43,416 km Operating hours: 3,379 h Working height: 20.2 m Max outreach: 13.0 m

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 Fgedpfx Ajz Et Ruea Ieh - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: used, Mobile Paint Drying Racks – Double-Sided, 6 / 12 Levels Heavy-duty mobile drying racks for storing and transporting freshly painted, lacquered, or coated workpieces during the drying and finishing process. The racks feature a robust, welded steel frame with support arms on both sides. Individual levels allow painted parts to be stored separately, preventing contact between the workpieces. Mounted on casters for easy movement between painting, drying, and production areas. Suitable for furniture and woodworking production, paint shops, metalworking, printing, and other industrial coating applications. Two versions are available: 12-level version Quantity available: 12 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 12 support levels Double-sided construction Mobile on casters Price: €450 excl. VAT / pc. Ref.: 47444-132 6-level version Quantity available: 2 pcs. Approximate dimensions: 600 × 2200 × 1200 mm Fsdpfx Aoz I Tynja Ijgh 6 support levels Double-sided construction Mobile on casters Price: €390 excl. VAT / pc. Ref.: 47444-132/1 Total quantity available: 14 pcs. Used industrial equipment in good working condition with normal signs of use. Available individually or in larger quantities. Located in Gatciems, Latvia. Inspection is possible by appointment. Loading assistance is available. Delivery within Europe can be arranged upon request.

Condition: used, functionality: fully functional, Cormidi KB 23 tracked aerial platform Year: 2020 Petrol engine + electric power supply Electronically controlled stabilizers Hydraulic platform levelling with electric control Maximum working height: 22.30 m Maximum working outreach: 11.75 m Maximum working area reach: 20.30 m Under-bridge work capability: up to -5 m Provision for crane and winch Good overall condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU. Fedpez Nkk Usfx Aa Iegh

Condition: used, mileage: 98,416 km, power: 132 kW (179.47 HP), first registration: 05/2019, overall weight: 7,000 kg, wheelbase: 4,100 mm, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, cruise control, onboard computer, power mirror, Special Features - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height- and reach-adjustable steering wheel - Electrically adjustable and heated mirrors L/R - Differential lock - Air conditioning - Power steering - Electronic immobilizer - Central locking with remote control - On-board computer - Twin tires - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Maximum outreach: 9.00 m Fgodpfx Aey Ia Iqsa Ish - Slewing angle: 400° - Setup inclination: 5% / 15% - Steel carrier system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Ground controls (5 m cable) - Hour meter - Emergency pump - Hydraulic pump activation from driver’s cab - Basket arm rotation angle: 140° - Acoustic tilt warning system - 2 hydraulic outriggers - Engine start-stop function in work basket - LED beacon lights - 230V socket in the basket - 2 x 60° basket rotation - Power inverter 3600 VA - Work basket (L/W/H): 1300 x 700 x 1150 mm The Iveco Daily with France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electricity, lighting maintenance, as well as municipal services and painting work. Besides the diesel drive, the vehicle is also equipped with an electric drive, allowing the work platform to be operated fully emission-free. Once arrived at the job site, the electric drive can be activated so the platform can be stabilized electrically and without emissions. Iveco Daily with aerial platform 172 TPFcc – your reliable partner for working at heights! All functions of the access platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German documents, TÜV inspection, and statutory accident insurance (UVV) are included free of charge. Additional equipment such as tow bar, lighting, shelving, and more can be fitted upon request. Immediately available from our warehouse in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photographs taken in-house – ensuring total transparency regarding the actual condition of the vehicle. Our vehicles undergo a comprehensive reconditioning process in our in-house specialist workshop prior to sale – including mechanical, bodywork, and paintwork. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – verification is even better: at your request, the vehicle can be inspected by independent expert organizations such as TÜV, DEKRA or KÜS – also available as a remote inspection. Our services for you: - Delivery of your vehicle to the location of your choice - Complete handling of export formalities, including export registration plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as desired Looking for something specific? If you do not currently find a suitable vehicle for your company in our inventory, please contact us – we are always happy to help.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control Fodpfx Aoztp Emsa Iogh 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.