Used Doppstadt Dz 750 for sale (81)

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips Dsdpeyu Snuofx Aqvocp - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: excellent (used), Year of construction: 2005, operating hours: 6,701 h, functionality: fully functional, overall weight: 19,000 kg, Doppstadt DW2560 Buffalo/Shredder/Chipper/Crusher/Slow-Speed Machine • Manufacturer: Doppstadt • Type: DW2560 • Year of manufacture: 11/2005 • Magnetic tape • Operating hours: 6701 hours • Engine: Mercedes Benz OM 442 Diesel engine • Slow-speed machine • Roller length: 2.5 meters • Roller diameter: approx. 600 mm • Roller: 17 teeth • Discharge height: 2.9 meters • Throughput: material-dependent, in the range of up to approx. 30 t/h • Remote control • Rear discharge conveyor • Transport length: 20 m • Transport width: 2.51 m • Transport height: 3.95 m • Total weight: 19000 kg • German machine • Immediately ready for operation Dedpfx Aqezz Sn Tovocp • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Dcedpfxey D Nkts Aqvjp Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Dcodevy A Urjpfx Aqvep New conveyor belt cleaner.

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Dsdpfx Aey D Nicjqvscp Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, Year of construction: 2020, operating hours: 403 h, Equipment: soot filter, Int-No.: B - 01 * Doppstadt Inventhor * Type 6 * 2-axle semi-trailer * Long conveyor belt (overhauled, only approx. 50 h) * Self-propelled operation * Only 403 operating hours * New price approx. €600,000 * Year of manufacture: 2020 * As-new condition Dodpfx Asxvgageqvscp Trade-in possible Financing from 4.99% interest Errors and prior sale excepted! The information in this ad is non-binding and does not constitute guaranteed features. The seller assumes no liability for typing or data transmission errors. Listed equipment must be verified separately. All information in the advertisements is non-binding! Delivery available throughout Germany on request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm and by appointment!

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2018, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Dsdpfx Aqjxqgm Nsvocp Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: used, Year of construction: 2006, Doppstadt DW 3060 E Büffel – Electric Shredder We are offering the following used Doppstadt shredder for sale: Technical data and equipment: Manufacturer / Model: Doppstadt DW 3060 E Büffel Year of manufacture: 2006 Drive: Electric motor, 315 kW Roller configuration: 21 teeth Control cabinet Lower conveyor belt Side conveyor belt, 9m Remote control Feed hopper with extension Dodpfx Aqoz Ntcgevecp Dismantling and loading: The machine will be dismantled and loaded. If you are interested, we will be happy to provide you with further information, photos, or arrange a viewing.

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control Dcsdjxx N Dgopfx Aqvep large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Our screening drum has been optimized in its design to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk goods – depending on the selected hole pattern ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole pattern – 18 to 20 mm The openings are laser-cut in a trapezoidal shape and widen from 18 mm to 20 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit again. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ consistent screening process. Djdpj Ad Uybjfx Aqvscp As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. ----- A special design advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side over a distance of approximately 15–30 mm. This keeps the heavily stressed area closed and provides higher material stability. ➡️ higher load capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Rectangular alignment of the hole pattern in the material flow direction This ensures that the material is guided in a controlled manner over the screening area and the available screening area is used efficiently. INDIVIDUAL HOLE PATTERN POSSIBLE Depending on the application, different hole patterns or screen widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will gladly check the appropriate design for your application. YOUR BENEFITS ✅ Optimized screening performance ✅ Reduced tendency to clog ✅ Consistent material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing applications ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the appropriate drum, design, or hole pattern, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. MANUFACTURER RKS Metallverarbeitung GmbH 48336 Sassenberg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Dcsdoym U E Hjpfx Aqvep Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: excellent (used), Year of construction: 2011, Mobile Trommel Screening Plant DOPPSTADT SM 518 Profi Screening drum length: 4.70 m Screening drum diameter: 1.80 m Dcsdpozwpcysfx Aqvsp Screening drum aperture: as per agreement Folding side discharge conveyor, length = 5 m Folding rear discharge conveyor, length = 5 m

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Dcodpfx Ajwnfwqeqvjp Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor belt Dodpfx Aozuyuujqvscp Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Overband magnet

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Dcsdjxcx Snopfx Aqvop Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Dsdpfxez Rfz Re Aqvjcp Short lead times and fair prices Contact us for your individual offer!

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Dcjdpfx Aeygnk Asqvsp Machine is overhauled and immediately available

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 25,300 kg, power: 210 kW (285.52 HP), For sale is a single-shaft shredder from Doppstadt. It is currently still integrated in our production and can be inspected on site. The conversion is scheduled to take place around the end of July 2026. All technical specifications can be found in the images. Dcedpfxoyrgibj Aqvep If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Our screening drum has been structurally optimized to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk materials – depending on the selected hole size ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole design – 18 to 21 mm The openings are laser-cut in a trapezoidal shape and widen from approximately 18 mm to 21 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ uniform screening process. As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. ----- A special structural advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side for approximately 15–30 mm. This keeps the highly stressed area closed and provides greater material stability. ➡️ higher load-bearing capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Dcedpfx Aez N Al Rsqvep Rectangular alignment of the holes in the direction of material flow This ensures that the material is guided in a controlled manner across the screening area, and the available screening area is used efficiently. ----- YOUR ADVANTAGES ✅ Optimized screening performance ✅ Lower tendency to clog ✅ Uniform material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing operations ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the right drum, design, or hole size, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. ----- INDIVIDUAL HOLE DESIGN POSSIBLE Depending on the application, different hole sizes or mesh widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will be happy to check the suitable design for your application. MANUFACTURER RKS Metallverarbeitung GmbH, 48336 Sassenberg

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Dcsdpfoz Rfpzjx Aqvep Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min Dedpfovrz Rvex Aqvecp - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Year of construction: 1995, condition: used, functionality: unexamined, We are selling a large sorting cabin from Doppstadt. It was used for sorting paper. It has not been used since 2021. Ideally, dismantling should be included in the offer. We could organize the dismantling through a service provider and, to the extent possible, provide technical and personnel support during the dismantling process. The sorting cabin was manufactured in 1995. The internal dimensions of the cabin are 9m long * 5m wide * 2.80m high. The sorting conveyor belt has a width of approximately 1.20 m. Djdpjx Rb Rxjfx Aqvecp In addition, there are also several conveyor belts and a ballistic separator from Stadler, as well as a paper spike (system Grumbach).

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth Dcedpfx Aqoyhyuyevep - Crawler chassis - Remote control - Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation Dedpfovnq Rkox Aqvjcp LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Dedpfx Aeyu Srmoqvscp Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement