Used Do Edger for sale (6,083)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, positioning accuracy: 0.2 mm, pressure: 3 bar, cutting length (max.): 5,000 mm, product height (max.): 120 mm, number of axes: 7, For sale: Emile Gillet edger with automatic sorting line, robust and reliable, ideal for both artisanal and industrial sawmills. Bdjdpfxoyldbbs Akajb Main features: -Cutting height clearance: 120 mm -Maximum cutting length: 5 m -7 axes, including 4 mobile -Proface touchscreen replaced in 2024 -Automatic trimmer: 3.5 m / 4 m / 4.5 m / 5 m -Automatic and programmable sorting line via touchscreen – 4 boxes -4-strand infeed chain -Regularly maintained, daily lubrication -No additional costs expected, machine ready for operation Additional information: -Operated 2 to 3 hours/day -Only used for sawing 27 mm boards Machine in working order until early August 2026 Price: On request

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value Bdodpfx Aksnygvroajb 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 310 mm, saw blade diameter: 350 mm, height adjustment type: electric, total length: 2,500 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 8,500 kg, table height: 810 mm, cutting length (max.): 8,000 mm, feed rate X-axis: 40 m/min, power of feed motor: 4,000 W, saw drive: 15,000 W, equipped with 2 shafts (upper and lower) for a maximum cutting thickness of 200 mm 2 motors of 75 KW each cutting width: 310 mm Bdodpfjwy Hzujx Akajb

Condition: used, Year of construction: 1992, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm Bsdpfx Aevntdmokajdb – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production Bjdjma Dkfepfx Akasdb – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg Bdjdeidmptopfx Akasb

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long Bdedpfxjia Nypo Akasb - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs Bsdpfx Akoir Euboaodb TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers Bdedpfx Ask Talpskaeb - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 Bodpfxslwqgao Akajdb TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Bdsdpfshuiwusx Akaeb

Condition: new, Year of construction: 2026, The air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively capturing dust, fine particles, and small debris generated during operation. Its use significantly reduces airborne dust, resulting in improved operator comfort and a cleaner working environment. During sweeping, contaminants are not only collected by the brushes but also drawn into the machine along with air. The air filter ensures these particles are effectively trapped, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and “dust-free” cleaning—especially important in warehouses, production halls, and enclosed spaces. A large filtration surface area and properly structured filter material allow for the effective capture of even very fine particles. Modern sweepers often use panel filters, which offer high performance and ease of use—frequently equipped with shaking or cleaning systems that help maintain consistent efficiency. The filter also serves a protective function for the machine’s components—it prevents contaminants from entering the suction system and other working parts, reducing the risk of failure and extending the machine’s lifespan. Bdedpfeyvp Tfsx Akasb An additional advantage is easy access and quick replacement, allowing the machine to be kept in optimal condition without unnecessary downtime. Regular inspection and cleaning of the filter are key to maintaining maximum sweeper performance. Key benefits: effective reduction of dust during operation improved air quality in the working environment high efficiency in filtering fine particles protection of machine components from contamination extended lifespan of the sweeper easy maintenance and quick replacement The air filter is an essential component for ZP7500 sweeper users who expect maximum cleaning efficiency while maintaining high comfort and safety—especially in dust-intensive environments.

Condition: new, Year of construction: 2026, The main brush for the ZP7500 sweeper is a key working component responsible for efficiently collecting debris from the cleaned surface. It ensures proper transport of dirt into the hopper, delivering high sweeping performance both indoors and outdoors. Thanks to its cylindrical design, the brush precisely picks up debris from beneath the machine and directs it into the sweeper. This operating system allows for effective removal of both fine particles such as dust and powder, as well as larger debris like sand, leaves, or small gravel. The result is a clean surface after just one pass. The bristles are selected with optimal stiffness to provide the best balance between cleaning efficiency and durability. The brush performs well on various types of surfaces—from smooth warehouse floors to more demanding industrial grounds. High wear resistance ensures that the main brush retains its properties over a long period, even under intensive use. This translates into lower operating costs and less frequent replacement of consumable parts. An additional advantage is the simple and quick installation, allowing for efficient replacement without downtime. This is particularly important in environments where equipment continuity is critical. Bdsdpfsyvp R Djx Akasb Key benefits: effective collection of debris into the hopper high efficiency in a single pass suitable for various surface types durable, wear-resistant bristles lower operating costs quick and convenient replacement The main brush is a fundamental consumable component of the ZP7500 sweeper, directly impacting work quality and efficiency. Regular replacement ensures maximum cleaning performance and reliable operation in daily use.

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris reduced manual labor and fewer passes required durable, wear-resistant bristles Bsdpfx Aoyvp Ngekasdb quick installation and convenient operation

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Weight 2500 kg Total power requirement 58,5 kw Bodpfx Aksvz Eh Rsajdb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Total power requirement 16,75 kw Bsdpovz Ezkefx Akaedb

Year of construction: 1991, condition: good (used), machine/vehicle number: 154.03.10.01.0291, Giętarka do ramek dystansowych Lisec BSV-45 wraz z podajnikiem do ramek oraz drukarką. Min. wymiar ramki: 250 x 150 mm Max. wymiar ramki: 3000 x 2200 mm Napięcie: 380-3/N~50Hz Bdsdpfx Ajg D Hdpskajb Złącze: 10 kW Ciśnienie: 6 bar Waga: 1125 kg Gwarancja rozruchowa.

Condition: new, Year of construction: 2026, BOARD EDEGR ANGOMAC ideal for wet and dry wood passage from 600 mm to 1300 mm max depth of cut from 10 mm to 160 mm until no.4 mobile blades Simple or highly automated versions are available. Bjdpfx Asd Tka Hjkasdb

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm Bdedpfxoxuipbo Akajb - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic clamping ensuring precise fixture of worked material, increasing cut accuracy and quality. This clamping is easy to assemble and operate. Technical data Clamping length 3200 mm Bodpfsvxtcqox Akaedb Material height 100 mm Actuators 4 Working pressure 2 bar Manufacturer: Cormak

Condition: new, Year of construction: 2026, A device designed for quick setting of knives on the planer shaft. It is equipped with an accurate scale and can be used for any diameter of the knife shaft without having to dismantle it from the planer. Bdsdsvzycispfx Akaeb Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK C33 column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals. Technical data Type automatic column Arm raising and lowering hydraulic with smooth control Band speed 20–100 m/min Steady and feeding vice hydraulic Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting band 34×1.1×4115 mm Main motor power 4.4 kW Hydraulic unit power 1.5 kW Coolant fluid pump power 0.75 kW Dimensions (L×W×H) 2300×1780×1650 mm Weight 1900 kg Max. cutting range Angle round square 0º ø300 300×400 Default equipment Automatic cycle operation Touchscreen LCD control panel Programming numbers and lengths of cut details Bdsdporh Epkofx Akaeb Possibility of storing 5 various cutting macros Electronic display of band speed Arm position memory function Built-in hydraulic unit Vice position storage function Smooth cutting speed adjustment (motor with an inverter) Powered brush for cleaning the band Cooling system Bi-metal saw blade EC Declaration of Conformity User manual For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed Bdsdpsiz S I Hefx Akajb motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, Semi-automatic CORMAK S440R band saw. Its arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Machine features Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine's arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Technical data Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base from ground distance 780 mm Cutting band dimensions 5200×34×1.1 mm Total power 4.4 kW Bdjdpfei Dx R Njx Akajb Band speed 20/90 m/min Dimensions (L×W×H) 2500×1900×1450 mm Weight 1100 kg Max. cutting range [mm] Angle 0º ø450 620×440 610×440 450×450 45º R ø440 500×190 360×440 420×420 45º L ø440 510×180 460×390 390×390 60º R ø330 330×170 170×440 300×300 60º L ø350 350×170 330×310 310×310 Standard equipment PLC controller Semi-automatic operating cycle Control console on a separate component Control panel with an LCD display Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Hydraulically controlled vice's jaws (long stroke cylinder with position memory) Cutting at angles of L/R 60o – 45o – 0o – 45o – 60o Digitally displayed set cutting angle Smooth band speed adjustability (inverter) Powered brush for cleaning the band Cooling system Bi-metal saw blade EC Declaration of Conformity User manual For more information please visit our web page or contact us.

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Bedpfx Aji D D A Sekajdb Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.