Used Dmg Ctx Alpha 300 for sale (404)

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Ljdpfx Aaox D H Hiolohd Application Types Milling

Condition: good (used), Year of construction: 2015, Table size 950 x 800mm , table load 1,000 kgs, Traverses X Y Z 1,000 x 900 x 700mm, B axis -5/+110 degrees, C axis 360 degrees Rapid feedrates 80m/min, 60 station toolchanger, spindle taper HSK 63, spindle speed 18,000rpm, Heidenhain TNC 530 control, swarf conveyor, Through Spindle Coolant Lhsdoyqxduepfx Aaljd

Condition: used, Year of construction: 2013, DMG DMC 635 V Ecoline Milling Machine with DMG Mori Siemens CNC Control & Hard Wheel, Swarf Conveyor, 3 Axis, 790 x 560 Bed, CAT40 Spindle Taper, 8000rpm, 20 Tool ATC. S/No. 1537000883E (2013) 3850kg. Country of Origin: China Lhodpfsyucp Ajx Aaljd Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system Ledpfoyvhuhex Aaljhd 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Lsdpfsywtwwsx Aaljhd Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 4,500 kg, Heidenhain TNC 426 travels 800X500X500 mm table 800X500 mm BT 40 tool changer Lhjdpfjylhybsx Aaljd

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Ljdpfoyv Ap Hox Aalshd Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 Lhsdpfoyvkuqex Aalsd b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Lsdpfx Ajv T Rtijalehd Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: good (used), Year of construction: 2013, 1 used 5-axis (3+2) universal machining center Make: DMG Mori Model: DMU 50 Year of manufacture: 2013 Technical specifications: X-travel: 500 mm y-travel: 450 mm z-travel: 400 mm C-axis: 360° B-axis (table -50 / +110° mm Spindle speed: 10,000 rpm Spindle mount: ISO 40 DIN 69871 Control: Heidenhain TNC 620 Total power requirement: 13 / 9 kW Machine weight: approx. 4.5 t Space requirement: approx. 6 x 3 x 3 m Additional information Options: Lhjdpfsywfc Ssx Aalsd - 30-slot magazine with double gripper - Production package with high-pressure coolant and scraper-belt conveyor - 360 L coolant tank - Air blast - Coolant pistol - Electronic handwheel - HEIDENHAIN TS 649 infrared touch probe - Direct measuring system New motor spindle in 2022 ATTENTION: The machine is sold without the clamping system shown in the photos!!

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Ledsyvvt Sepfx Aalohd Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Lsdsx D Npgepfx Aaljhd Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous • Table size: approx. Ø 900 × 700 mm • Max. workpiece weight: approx. 1400–1800 kg • Spindle type: Vertical milling spindle • Coolant through spindle (CTS): yes • CE compliant • Condition: Very good working condition; full service history available Lhjdpfeyvhfmox Aalsd Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 3,950 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details. • Spindle: • Power: 13 kW (40% ED) / 9 kW (100% ED) • Max torque: 83 Nm (40% ED) / 57 Nm (100% ED) • Feed rates: Ljdjyvghdepfx Aalohd • Rapid traverse: 20–12,000 mm/min • Table / layout (según plano): • Table travel usable: X 635 / Y 510 • Table center to spindle nose aprox.: según esquema (standard DMC 635 V) • Hours (según contador foto): • Power on: ~20,933 h • Operating: ~8,347 h

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 3D, table load: 500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details. • Working area / travel: • Modification: X-axis travel reduced by 100 mm (effective X travel 630 mm) • Main drive & spindle: • Motor spindle SK40 with active cooling • Power: 15 kW (40% duty) / 10 kW (100% continuous) • Tooling system: • Tool holder: SK40 (DIN 69871) • Tool clamping: DIN 69872 • Tool changer: Pick-up system • Magazine: 24 pockets (SK40) • Work table: • Integrated NC rotary table in rigid table • Rotary table Ø 600 mm; total table 1,000 x 600 mm • T-slots: 1x 14 H7 (alignment, centered) + 8x 14 H12 (clamping) • T-slot spacing: 63 mm • Permissible load: 500 kg • Milling head: • Controlled NC-swivel B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivel range: -120° to +30° • Control system: Lsdpfeyvfpbox Aalehd • Electronic handwheel iTNC 530 • Control language: German Additional equipment • Workpiece measurement: Heidenhain TS 640 infrared probe (SK40) • Tool measurement: Blum laser (in-machine vertical tool length and diameter) • Chip conveyor • Flushing gun with pump (1 bar / 40 l/min theoretical capacity) • Networking: DMG Netservice Basic Package Euro ISDN (Netservice Box, Cisco Euro ISDN Router, license) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, controller manufacturer: FANUC, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. Lhodpfx Aaoyu Sc Esled

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck Lsdpsyvql Nofx Aalohd

Condition: used, Year of construction: 2019, For sale is a DMU125P duoBlock in like-new condition! Lhsdpfsywuklex Aaled The machine ran for only about 3,500 hours. - Immediately available - Worldwide Export Installation plans/transport data see photos. Construction year: 2019 Control: Heidenhain TNC640 Travel: X-1.250 mm, Y-1.250 mm, Z-1.000 mm table size: 1.250 x 1100 mm max. table load: 2.800 kg Milling head: A-axis -125 / + 35° x table: NC rotary table Spindle mount: HSK-A63 Spindle speed: max. 15,000 rpm tool magazine: 63 places Internal coolant supply (IKZ): 80 bar, frequency-controlled, suction, cooling device Blasluft probe: Heidenhain Measuring: 3D quickSET operating mode: 4 electric handwheel: Heidenhain Machine monitoring: MPC Machine Protection Control Linear axes X/Y/Z Rapid traverse speed: 60 m/min machine weight: 27.000 kg

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Lhodpjyuy Enefx Aalod Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 18,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 380 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 ERGOline, spindle motor power: 19,000 W, table load: 500 kg, number of axes: 5, This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details. • Condition: Very good / well maintained • Rapid traverse: up to 80 m/min (linear drives) • Tool interface: HSK-A63 (DIN 69893) • Tool magazine: 30 positions with double gripper • Table clamping diameter: 600 mm • Swivel range: • B-axis: +20° / −110° • C-axis: 360° • Features: • Linear drive package for high dynamics • Absolute/direct measuring systems • Active cooling system (spindle, linear drives, electrical cabinet) • Frame temperature control • Fully enclosed working area with second door • 3D control capability • Highlights: • High-precision 5-axis machining • Linear drive technology for maximum dynamics and accuracy Additional equipment Ljdjyud S Sspfx Aalohd • Chip conveyor with coolant system and air blast

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Ledpfjyvt S Esx Aalshd Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) Lodpfx Aeyt Rdrjalehd • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 3, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Lhedpfsyt Nxzsx Aalod Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A Lhodpfx Aaoyt Hwzjlsd • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Ljdpfxsyvzl Hs Aalohd Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine