Used Disinfection for sale (133)

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 Fjdpfxsrxuv Ao Agxogi bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg

Condition: new, The Revolution in Instrument Reprocessing Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – convincing advantages for your practice! Why should you use four different products for instrument reprocessing when you can have everything in one device? With Careclave, you save significant time, money, and space in your dental practice compared to conventional device combinations, starting from day one: €6,000 less in service costs: Because fewer devices mean lower costs. Careclave is not only cheaper to purchase, but also saves you extra maintenance and validation for additional devices. 45% more space in the reprocessing room: Your practice team knows that working space in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! This is because you can forgo an additional maintenance device. 33% more instruments per cycle: Careclave is a speedster. The reprocessing of 8 hollow-body instruments in just 16–18 minutes guarantees rapid reusability and thus reduces the need for investment in additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in just one device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to 8 handpieces, prophylaxis handpieces, or ZEG tips in just 16 minutes. Fgsdpfoyk Eqbsx Agxei 2. Maintenance Careclave gently and quickly takes care of the handpieces in the Carebox. With the world’s first integrated ADDcare maintenance station, the equally important collet maintenance is also performed directly on the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-walled technology, Careclave offers everything that is expected of a modern autoclave – and more: sterilize up to 11 kg of load on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber concept, the reprocessing and maintenance of instruments in the Carebox and the simultaneous sterilization of other instruments on short trays are also possible in a single cycle. 4. Documentation and Release With ProControl, you can quickly, safely, and paperlessly demonstrate error-free instrument reprocessing. Because documentation and release are carried out without extra software directly on the Careclave® display. For complete documentation, the reprocessing protocols are saved on the MELAG USB stick or in the practice network. Model: Careclave 618 Dimensions W x D x H: 65.3 cm x 48 cm x 56.2 cm Suitable for tabletop: 60 cm Internal dimensions: Ø 25 cm x 35 cm Area of application: Dental Power supply: 220 - 240 V, 50 Hz Power: 3 kW Compressed air connection: 4 - 8 bar Validation capability: validatable Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow-body instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying Color: white Weight: 69 kg MSRP €21,509.00 "Everything from one source: We would be happy to offer you a suitable bank financing for your project." You can find more articles – new and used – in our shop! International shipping costs on request!

Condition: used, NIEROS Compact HC C is a compact hygiene station designed for personnel access control in production facilities where strict hygiene standards are required. With integrated hand disinfection and footwear cleaning systems, it provides effective sanitation before entering production areas. Fgodpfozgqyfjx Agxji The unit features two automatic hand disinfection modules, a footwear sanitizing pool, and a walk-through footwear brush cleaner. Two turnstile-controlled passages ensure controlled personnel flow while maintaining hygiene compliance. Its stainless steel construction provides durability, easy maintenance, and reliable operation in demanding industrial environments. Thanks to its compact footprint, the unit is particularly suitable for production facilities with limited available space. Technical Specifications Manufacturer: NIEROS Model: Compact HC C Type: Hygiene Station with Hand and Footwear Sanitization Material: Stainless Steel (Inox) Dimensions (L × W × H): 1665 × 1650 × 1460 mm Brush Dimensions: Ø 190 × 855 mm Power Supply: 3 × 400 V, 50 Hz Connected Load: 0.7 kW Water Connection: R 3/4” Drain Outlet: DN 50 Throughput: 10–15 persons per minute Access Control: Dual Turnstile System

Condition: used, Year of construction: 2002, CIP tanks for water, caustic, acid and disinfectant. Additional title: 4 vertical vessels Volume: 1270 l Caustic tank, acid tank, disinfectant tank Fgsdpfoxbpibsx Agxsi Material: Stainless steel Features: Water tank, 870 l; Caustic tank, 1270 l; Acid tank, 1270 l; Disinfectant, 1270 l

Condition: used, Cleaning-in-place system for closed cleaning of process systems. Constructed from a rectangular container divided into 2 chambers. For each chamber, the tank is equipped with a removable lid and an outlet pipe with manual valve. With dosing pumps for acid, alkali and disinfectant as well as a centrifugal pump as a CIP feed pump. Additional title: with 2 rectangular chambers Length: 3,7 m Width: 0,5 m Height: 1,5 m Weight: 300 kg Material: stainless steel Features: rectangular vessel with 2 chambers, outlets with manual valves, prerun pump, dosage pumps Fgsdoxbptmopfx Agxsi

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Fedpfexxy U Nsx Agxsgi Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for Fjdpfxjupw R Aj Agxjgi different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, ITEC Star Clean 23871 is a professional hygiene station designed to control personnel access to production areas in the food processing industry. The system provides automatic cleaning and disinfection of footwear, ensuring high hygiene standards before entering production zones. The unit uses rotating brushes to effectively clean and disinfect the soles and sides of footwear during passage. Automatic sensor activation ensures simple, safe, and hands-free operation. Constructed from high-grade stainless steel, the station offers durability and reliable performance in demanding industrial environments. It is ideal for food processing, meat, dairy, and pharmaceutical facilities where strict hygiene standards are required. Technical Specifications Manufacturer: ITEC Hygiene / Frontmatec Model: Star Clean 23871 Type: Footwear Cleaning and Disinfection Station Fjdszgqvaspfx Agxogi Material: Stainless Steel (Inox) Power Supply: 400 V, 3N/PE, 50–60 Hz Power Consumption: 0.75–1.25 kW Water Connection: 3/4” Throughput: 5–7 persons per minute Activation: Automatic sensor operation Application: Food, meat, dairy, and pharmaceutical industries

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Fgedpfx Agjhr Rqlexei Brushes can be chosen in blue, red or white colours.

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Fgodpfonl Dzxsx Agxoi Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut Fgsdpjxabacjfx Agxoi BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. Fjdpfxsvgud Se Agxjgi UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 400 mm, area performance: 1,200 m²/h, overall weight: 22 kg, warranty duration: 12 months, tank capacity: 4 l, water tank capacity: 4 l, I am offering the innovative Aventurier Artist 1 SE cleaning device, which combines effective scrubbing and debris collection in a single pass. This is a professional machine designed for daily cleanliness maintenance where precision, convenience, and operational efficiency are essential—ideal for schools, offices, clinics, hotels, restaurants, and small commercial spaces. Key features: • Rotating cleaning head – enables easy maneuvering and access to hard-to-reach areas: corners, edges, under furniture. • Compact size and ergonomic design – adjustable tilt angle allows adaptation to the operator's height, ensuring comfort even during prolonged use. • Intuitive operation – the touch control panel allows quick and easy adjustment of the operating mode to the specific task and surface type. • Versatility – effectively removes dirt from all types of hard flooring, including porcelain tiles, concrete, stone, and vinyl panels. • Quiet operation – perfect for use during opening hours and in noise-sensitive environments. Technical specifications: Theoretical performance: 1000–1200 m2/h Working width: 40 cm Brush pressure: 15 kg Vacuum pressure: 8000 Pa Brush rotation speed: 350 rpm Average water consumption: 100–140 l/m2 Tank capacity: clean water – 4 l / dirty water – 4 l Operating time: Eco mode 150 min / Turbo mode 120 min Charging time: 100 min / per battery Noise level: 60 dB (Eco mode) / 68 dB (Turbo mode) Cleaning modes: Eco/Auto/Turbo/Sterilization/Deep clean Dimensions: 110.4 x 43.9 x 34.6 cm Gross weight: 22 kg Device characteristics: • Equipped with a HEPA filter for effective filtration and disinfection. • High-resolution LCD display + intelligent voice system • Easy removal of the dirty water tank enables convenient cleaning, preventing unpleasant odors Fgsdpfowz Nr Eex Agxsi • Clean water tank with dual inlets suitable for all types of faucets • Extended battery run time – up to 2.5 hours on a single charge! • Edge cleaning system • Antibacterial body Equipment included: Battery Disc brush Squeegee blade HEPA filter LED lighting Wi-Fi

Condition: excellent (used), mileage: 595,490 km, power: 397 kW (539.77 HP), first registration: 05/2022, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,960 mm, total width: 2,550 mm, total height: 3,720 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power assisted steering, power mirror, retarder, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control (ACC) - Alarm System - Aluminum Fuel Tank - Apple CarPlay - Leaf Spring Suspension - Electronic Cab Tilting System - Speed Limiter - Speed Limiter - Intelligent Tachograph Gen2 v2 - Air Conditioning - Complete Spoiler / Fenders / Side Skirts - Alloy Wheels - Air Suspension - Air-Suspended Driver's Seat - Particulate Filter - Wheel Disinfection System - Radio/CD Player - Side Camera - Seat Heating / Ventilation - Sun Visor - Mirror Heating - Lane Departure Warning System - Stability Control Fgodj Agn Dkopfx Agxji - Auxiliary Heater / Air Conditioning - Bumpers in Body Color - Automatic Heating System = Notes = SCANIA R540 NGS Retarder Alcoa Wheels 5954 km 2022 Smart Tachograph 2 Euro6-E 4X2 TÜV/MOT/APK valid until 05-2027 German Vehicle * First owner and consistently serviced in a Scania workshop * Chassis Number: YS2R4X20005655061 Video of the truck (YouTube): EXPORT SERVICES ————— • NL Transit Registration / License Plates with Insurance for 14 Days • Austrian Transit Permit / License Plates with Insurance for 21 Days • Transport to any port in the Netherlands and Belgium • Truck transport with semi-trailer Prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Fgedpfx Aswmln Tsgxei Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Year of construction: 2026, condition: like new (used), Binder KB 720 E7 from 2026. Device in like-new condition with a 2-year spare parts warranty. PRODUCT DESCRIPTION A high-performance, versatile champion among cooled incubators for microorganism cultivation: the KB model provides highly precise incubation even at full load, hot air disinfection, and can be easily programmed for weekend refrigeration mode. The new KB incubator consumes up to 40% less energy compared to the previous model. KEY FEATURES Fgodoy R T Hfopfx Agxji Temperature range: 0°C to 70°C Proven APT.line™ preheating chamber technology Up to 40% energy savings compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Cooling with environmentally friendly R-600a refrigerant Door heating to prevent condensation Robust housing design with HIT sandwich technology Interior made entirely of stainless steel Inner door made of safety glass with metal oxide coating Two stainless steel wire shelves 3 access ports with silicone plugs Free-standing unit with durable, twin casters and front brakes Easy programming of a second set temperature value Internal data logger, measurement values in open format readable via USB Independent class 3.3 temperature safety device (DIN 12880) with visual and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB

Condition: like new (used), Binder KBW 720 (2024) – Phytotron Chamber, Perfect Condition, Showroom Machine Fgedpjw Nvbzjfx Agxei Model: Binder KBW 720 Year of manufacture: 2024 Condition: Like new – used exclusively as a demonstration unit after manufacturer testing Capacity: 720 liters Type: plant growth/climate/stability simulation chamber (phytotron) Power supply: 230 V Warranty: Yes (start-up) VAT Invoice: Yes Availability: Immediate Location: Grabina 92-701, Poland ——— Description: For sale: Binder KBW 720 climate chamber – a premium-class device for stability testing, plant growth simulation, and pharmaceutical & climatic research. The KBW 720 model combines a large working chamber (720 liters) with precise temperature and lighting control, making it an ideal choice for research institutes, laboratories, the pharmaceutical industry, and the agri-food sector. The unit was used solely as a demonstration exhibit – factory condition, ready for operation. ——— Technical data: • Temperature range: from +5°C to +70°C • Chamber capacity: 720 liters • Fluorescent lighting up to 15,000 Lux (programmable) • e™ – uniform temperature and light distribution • Stainless steel interior – easy to clean and disinfect • Programmable controller with LCD screen • Integrated data logger, USB port • Quiet operation, energy-saving technology ——— Applications: • Climatic testing under controlled lighting conditions • Phytotron-based research on plants and seeds • Stability tests in accordance with ICH guidelines • Use in pharmaceuticals, biotechnology, veterinary medicine ——— Why choose this unit? • Condition like new – no signs of use • Available immediately – no factory lead time • Perfect alternative to new equipment – at a lower price • Option for online demonstration or on-site visit • Technical support and optional extended service (delivery possible)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°. Fodpofh Skasfx Agxjgi

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various Fgsdpfx Asd Iipzogxsi section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Fgedpfxev Nmawe Agxji Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Fgsdpev Nlbgsfx Agxoi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 Fjdpfed Tgaqex Agxogi -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities Fgjdpfod Iip Ajx Agxoi as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm Fgjdpfx Ajupxupegxsi band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2026, condition: new, 12 bottles can be washed at the same time. Fgjdeff Ag Ejpfx Agxsi Specifications: - 12 washing heads - automatic washing head - adjustable washing time - Suitable for bottles with 0.1 to 1.5 liters - It is possible to mix cleaning and disinfection chemicals with it - Weight: 100 kg - Electric power: 375 W, 230 V. - Material: WNr. 1.4301, AISI 304 stainless steel