Used Demag Ac 100 for sale (521)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 879 1 0052, clamping force: 3,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Prsdjxtmpvjpfx Ag Djd

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Pedpsh Ad Saefx Ag Dsrd Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Prsdpfx Aoxr N Ureg Ded

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 cm Machine weight 25340 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Application Types Prsdoxp Snpepfx Ag Ded Injection Moulding

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Operating hours: 10,800 h Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Pjdpfx Agsxywd Ds Dord Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: excellent (used), contactor control Predpfx Agef Ey Edj Dsd Polu Box Make DEMAG with documents

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Pjdpfx Aoxrf Nreg Dsrd

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Podpsxhfuajfx Ag Dsrd Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Podsxluk Ejpfx Ag Dord terms of payment: 100% prior to delivery

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 Machine weight 26210 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Pjdpfjxp Sn Aox Ag Dord Injection Moulding

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Podpexxrr Tsfx Ag Dord Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Prjdsxup T Hspfx Ag Ded Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Pjdpfxsxn S Tpj Ag Derd

Condition: used, Year of construction: 1991, operating hours: 35,498 h, functionality: fully functional, Equipment: documentation/manual, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume (70mm): 960 cm³ / 860 g Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Prodpfx Ajxk Tk Iog Dsd Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2x Air valve: 1x Robot interface Equipment 2-circuit core pull / 2-circuit robot interface 5/2 air valve No.1 on moving platen Clamping force control Handling interface, Euromap 12 (32-pin) robot interface Tool protection interface (ejector plate safety) Integrated hot runner control, 2 zones Mould protection Electrical plug combination

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Prsdexlukxopfx Ag Dod terms of payment: 100% prior to delivery

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Prjdoxpkuzjpfx Ag Ded Application Types Injection Moulding

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (without the shown handling unit / temperature control equipment / material supply [hopper, loader]). Designation SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Pedpfxew E N S To Ag Djrd - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (LxWxH), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm.

Condition: used, Year of construction: 2018, DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 Manufacturer DEMAG Cranes & Components GmbH – Germany Type Industrial motorized overhead travelling crane – single or double girder Industrial Applications Heavy-duty lifting in steel plants, fabrication workshops, boiler-making, general machining, and logistics warehouses Main Technical Specifications: - Rated capacity: 16 tons (16,000 kg) - Year of manufacture: 2018 Prsdpfxsxb D Nvj Ag Dsd - Manufacturer: DEMAG – global leader in industrial lifting - Motorized travel on rails - Electric wire rope hoist (DEMAG standard, high capacity) - Power supply: industrial three-phase - Control: pendant or radio remote (depending on configuration) - Condition: used – recent, robust design 🧩 Machine Usage The DEMAG 16T overhead crane is engineered for heavy-duty lifting in demanding environments. Its high capacity and modern design ensure efficiency, safety, and long-term performance. ⚙️ Features / Differentiators - Medium-high capacity (16T) for heavy industrial operations - Recent build (2018) compliant with modern safety standards - Integrated DEMAG hoisting and electrical systems - Compatible with automation and remote-control options

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Freight basis: ex-works Psdpfewz R Iusx Ag Derd

Condition: ready for operation (used), Year of construction: 2017, operating hours: 42,177 h, General Data Measurements width 2300 mm Prjdpfxexqh U Ij Ag Ded Measurements depth 9700 mm Measurements height 290 mm Machine weight 4052 kg Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 5800 kN This SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, clamping force of 5,800 kN, and tiebar spacing of 1,020 mm. With 42,177 operating hours and 48,627,617 cycles, it's a proven performer. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Podpfxswlkcae Ag Dsrd Payment terms: 100% before takeover of the machine, net

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,073 h, General Data Measurements width 2200 mm Measurements depth 8500 mm Measurements height 2800 mm Machine weight 2759 kg Injection Unit Prjdjxqh Uzspfx Ag Djd Screw diameter 70 mm Clamping Unit Clamping force 4500 kN This SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 70 mm, a clamping force of 4,500 kN, and tiebar spacing of 920 mm. Despite its extensive use, it remains operational but requires attention due to a knee lever issue. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,311 h, General Data Measurements width 18000 mm Measurements depth 7000 mm Measurements height 2500 mm Predpoxqiafjfx Ag Ded Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 3000 kN This SUMITOMO SHI DEMAG El-Exis SP 300/720-920 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 45 mm, a clamping force of 3,000 kN, and tiebar spacing of 720 mm. With 62,311 operating hours and 50,971,553 cycles, consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 300/720-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Prjdpfxoxnd Sqs Ag Dsd Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Prsdpexmbv Dsfx Ag Djd