Used Demag 500 for sale (559)

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Isdpfezt Ivdsx Altetk Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-997, DEMAG KBK crane canopy crane runway with dimensions approx. 4x6m (6m bridge) Payload / lifting capacity 250 KG - 0.25to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: Itjdpfxety Sxqj Altek KBK rails, rail joiners, trolleys, end plates, cable carrier, brackets/hangers etc. incl. steel 250KG chain hoist - lifting height approx. 5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Itsdpszqam Ajfx Altek For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type PK 2 N Iodpfx Aloy E T Dmjtstk Serial No: 2033985 Year of manufacture: 1973 Load capacity: 500 kg Hook travel: 15 meters Lifting speed: 5 m/min - 2 fall lines Good condition

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Lifting capacity 500 kg 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters Itsdpfx Asyy S Tioltok

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP147/147.2/147.3/58, 1 Vetter wall-mounted slewing crane 500 KG payload / lifting capacity Itjdpfoy D D Imjx Altok Crane is available 4x!!! Type PW2.5-4.0 Outreach approx. 4m, 500 KG - 0.5t payload With chain hoist, 500 KG load capacity (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 1999 Complete with wall bracket, jib arm, chain hoist, cable drag, trolley, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Fully functional condition See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Ijdpjng H T Uefx Altetk Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: verschiedene, overall weight: 40,000 kg, load capacity: 40,000 kg, DGUV certified until: 03/2027, Equipment: documentation/manual, Several bridge cranes with capacities ranging from 5 to 40 tons and several wall-mounted jib cranes with capacities ranging from 0.5 to 1.6 tons are available. All crane systems are currently in operation and undergo annual inspections. The last inspection was in March 2026, and the crane documentation is available. Due to a relocation of operations, the bridge cranes can be dismantled in February 2027. Itsdpfxezu Sl Es Altjk Location: Neusäß near Augsburg, contact person: Frank Klein. Please see the images for details.

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Itjdpjzt Itcjfx Altok Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: 94530048, load capacity: 250 kg, DGUV certified until: 02/2027, Equipment: documentation/manual, We are offering this very well-maintained DEMAG KBK crane arm for sale. Manufacturer: Terex MHPS GmbH Type: KBK Load capacity: 250 kg Year of manufacture: 2014 Factory number: 94530048 Drive unit group 2m / M5 Iedpjzrp Ekofx Altetk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces Iedpfx Aswug Nueltotk 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3

Condition: excellent (used), Column-mounted slewing crane, manufacturer Demag Itodpjy Hfycjfx Altek Lifting capacity: 500 kg Jib length: 3500 mm Lifting height: 2250 mm Overall height: 3100 mm Chain hoist Demag PK 2 N Lifting speed: 5 m/min 380 Volt Weight: 515 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Itjdpfx Asrft Nljltek Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 125KG Manulift one-hand chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Height: approx. 3m UK boom: approx. 2.5m Iodpevv N Auofx Altetk Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg with chain hoist 250Kg chain hoist incl. bolt, cable drag, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: good (used), functionality: fully functional, 3 DEMAG single-rail traveling trolleys, complete, all identical in design with DEMAG lifting unit, type DH316 H12 with lifting motor KBH140 B2/12 Gear ratio i=85 Itsdpfev Uvu Uox Altjk Hook travel 6m Main lifting speed 6.3 m/min Fine lifting speed 1 m/min Load capacity 6.3 tons Rope configuration 4/1 very good used condition, price per unit numerous lifting units in stock Info: we have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Also, check out my other offers from my inventory!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Itsdszp Ew Djpfx Altsk - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Iodpfxozc Nv Ee Altstk Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP188?, 1 Vetter wall-mounted slewing crane, 500 kg payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500 kg payload (0.5 tons) with chain hoist, 500 kg payload (2 lifting speeds) Total weight approx. 350 kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, chassis, and small parts Ijdpfjy Ugbwox Altetk Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Shipping via freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Itjdszbg Ezspfx Altsk Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail Ijdpfxotqwrvj Altstk - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: used, Pillar Jib Crane DEMAG Type KBK 2 Year of manufacture: 1979 Load capacity: 500 kg Slewing range: 270° Outreach: 3200 mm Overall height: 3250 mm Jib length: 3100 mm Height to underside of jib: 2730 mm - Jib profile DEMAG C-section rail KBK 2 - Trolley for DEMAG C-section rail KBK 2 - Base plate of crane pillar is no longer original L x W x H = 450 x 450 x 25 mm with cut-out (4 holes Ø approx. 28 mm) Dead weight: 270 kg Good condition Ijdpfxoxtq Amj Altstk

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Itedozc Nwcjpfx Altsk Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Itsdpfeyzblqjx Altjk Rated load at full outreach: 125kg Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Itodpfx Asty Swtjltek Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Iedety Swyepfx Altetk Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only