Used Demag 500 Kg for sale (567)

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type PK 5N-F Manufacturer’s serial number: 5300331, Year of manufacture: 1990 Load capacity: 500 kg Hodez Ek Rrjpfx Akiew Hook travel: 3 meters Distance from suspension point to load hook: 550 mm Main lifting speed: 10 m/min Fine lifting speed: 2.5 m/min Cable length for control pendant: approx. 1.8 meters Power connection: 400 Volt, 50 Hz - 1 load chain = 500 kg - Emergency stop Weight: 52 kg Good condition

Year of construction: 1995, condition: used, Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible. Hedpfjzzqcpex Akiew

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Beams were cut flush with the floor, as they were cast into the concrete. Hsdpfxoz Tdbno Akisw Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior appointment

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. Hedju I U Anspfx Akiew incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions. Hodspiarnopfx Akiow

Condition: used, functionality: fully functional, Year of construction: 1978, machine/vehicle number: ROD43, 1 Demag KBK II wall-mounted jib crane, 250 kg payload / lifting capacity Jib length 5 m, 125 kg payload Fitted with Abus GM chain hoist, 125 kg capacity – Year 2023! Weight incl. wall bracket (recent date) approx. 350 kg Complete with chain hoist, cable trolley, travel gear, and small parts Slewing range 270° Item location: 75053 Gondelsheim Hedpfx Asxmuugskiow The unit is fully dismantled and immediately available Shipping by freight carrier or local pickup Please inquire for shipping costs by postal code

Condition: excellent (used), Column-mounted slewing crane, manufacturer Demag Lifting capacity: 500 kg Jib length: 3500 mm Lifting height: 2250 mm Overall height: 3100 mm Chain hoist Demag PK 2 N Lifting speed: 5 m/min 380 Volt Hedpfx Akoy Hfycoijw Weight: 515 kg

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Lifting capacity 500 kg Hodpjyy S Tiofx Akiow 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Condition: used, Pillar Jib Crane DEMAG Type KBK 2 Year of manufacture: 1979 Hedpfx Asxtq Amjkijw Load capacity: 500 kg Slewing range: 270° Outreach: 3200 mm Overall height: 3250 mm Jib length: 3100 mm Height to underside of jib: 2730 mm - Jib profile DEMAG C-section rail KBK 2 - Trolley for DEMAG C-section rail KBK 2 - Base plate of crane pillar is no longer original L x W x H = 450 x 450 x 25 mm with cut-out (4 holes Ø approx. 28 mm) Dead weight: 270 kg Good condition

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Crane runway made from Demag KBK1 + 2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Hjdomqf Nfopfx Akiew Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions.

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Hodpsr E Ht Hsfx Akisw Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS14 + RIO RES, Technical Data: 1x Demag KBK 2 pillar slewing crane NL 500KG with Demag PK chain hoist There are 4 cranes available!! Load capacity at full outreach: 500KG Height: approx. 3.55m Underside of jib: approx. 3m Outreach: 3m Hook height: approx. 2.6m Total weight: approx. 300KG With 500KG Demag PK chain hoist Incl. bolts, cable trolley, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Further cranes with capacities 80-5000Kg available – please inquire See pictures Hjdpfxoywfl Te Akiew Shipping via freight forwarding or collection only by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Hodpfxoyyu S Ue Akiew

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, machine/vehicle number: MBR 1000Kg, Demag ELKE overhead crane, bridge crane, industrial crane Crane available in duplicate!!! Year of manufacture 1983 + 1985 Load capacity / lifting capacity 1 ton - 1000 kg Gauge 6700 mm, overall dimensions approx. 6800 mm With floor control and fine positioning Demag PLV82NF wire rope hoist 1000 kg Lifting height 4.5 m Overall height from top of crane to hook approx. 650 mm Head beam length with buffer approx. 140 cm Crane is dismantled and immediately available Good used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Hodpfx Akjzffmdoijw Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: good (used), 2 lifting motors/chain hoist without suction lifter Length: 13000 mm Width: 5600 mm Hedpoxaubaofx Akijw Height: 3250 mm Motor 1 lower edge: 3040 mm Motor 2 lower edge: 2970 mm

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Hodpfsz Hlx Hjx Akisw Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2 x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm Hjdpoyvr Huefx Akiow – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Hjdpferft Nzjx Akijw Used Condition Item location is 75053 Gondelsheim See pictures

Condition: used, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist and guide the load. Application High-quality and sensitive parts can be lifted, lowered and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be carried out much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design - plug and lift - all electrical connections of the chain hoist are pluggable - with a foldable, universal suspension bracket, the hoist can be easily attached to the frame - fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch - quick change of the entire chain drive without disassembly of motor or gearbox parts - contactor control 24 V, protection class IP55 - operating hour counter - limit switch for upper/lower hook position - high safety and long service life thanks to the speed-monitored brake/slip clutch principle Advantage - One-hand operation, i.e. the control unit is located above the part to be handled (left- and right-hand operation via rocker switch) - Quick-change coupling enables universal use through easy exchange of the various load handling devices Technical data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load capacity 80 kg Lifting height 2.8 m Lifting speed control In 2 stages Lifting speed fine lift 4 m/min Lifting speed main lift 16 m/min Number of load strands 1 piece Overall height (H) 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control unit GSA Type 4 Hjdpshwd E Njfx Akiow Color Azure blue RAL 5009 Mandatory testing according to DGUV (UVV) Yes Delivery unit 1 Gross weight 25.000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1982, condition: used, machine/vehicle number: TH20000168, Demag bridge crane, crane canopy, crane track, indoor crane Hsdov A Snmspfx Akisw Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m Hjdpjr Igruefx Akijw with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Base plate of the prop 40x40cm Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Hedpfx Aey T Hy Djkijw Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Year of construction: 1980, condition: used, machine/vehicle number: TH20009955, Demag bridge crane, crane canopy, crane track, indoor crane Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Hodpfxsv A Snao Akiew Beam lengths per side: 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: ROD391, Technical specifications: 1x Demag KBK 1 pillar slewing crane, NL 80KG, with Abus chain hoist, manufactured in 2021 Load capacity at full outreach: 80KG Height: approx. 3.65 m (pillar 3.05 m + pillar extension) UK jib length: approx. 3.1 m Outreach: 5 m Hodpfx Aoz Tcv Dekiow Hook height: approx. 2.7 m Total weight: approx. 400KG with 80KG Abus GM chain hoist, manufactured in 2021 including bolts, cable carrier, trolley, end cap, etc. Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000KG, please inquire See pictures Shipping via freight forwarder or collection only by prior arrangement

Condition: used, Year of construction: 2022, overall weight: 300 kg, load capacity: 125 kg, Used pillar-mounted slewing crane from DEMAG, type KBK. The crane has a load capacity of 125 kg, an outreach of approximately 2,900 mm, and an overall height of approximately 4,000 mm. The lower edge of the jib is at approximately 3,500 mm, and the highest hook position is at approximately 3,250 mm. Hedpfxs Agxf Ds Akiew The system is equipped with a Demag DC-PRO 1-125 1/1 H5 V8/2 electric chain hoist, manufactured in 2022, with a load capacity of 125 kg and a lifting height of 5.0 m. The chain hoist has two lifting speeds of 2.0 and 8.0 m/min, FEM class 4m / M7, and a power rating of 0.18 kW. In addition, the system includes a mechanical Rieder box handling gripper with a load capacity of 45 kg and a GROHMANN ENGINEERING MP02 handling gripper with a permissible load of 45 kg. Condition: used, stored in disassembled condition.