Pillar jib crane

DEMAG

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Nsdpfx Aiszdiyxjyecu Maximum tool weight, moving side: 2,500 kg MACHINE DETAILS Thread: M20 Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm Ncjdpoxak Hxjfx Aiyou - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m Njdpewd Hhcsfx Aiyjcu - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: ready for operation (used), Column Jib Crane, Swing Crane, 80 kg Crane, Used Machine Load Capacity: 125 kg Column Height: 3800 mm Jib Length / Reach: 1650 mm Chain Hoist: Demag PMV5-V2F6 Load Capacity: 80 kg Njdpfxev R Du Ue Aiyocu Electrical Data: 400 V; 0.3 kW; 1.5 A

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Njdpfx Aexmf R Seiyjcu Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES Ncsdpsx Sqi Hofx Aiysu ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Ncjdpfx Aowlkcajiyou

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Ncjdpfx Aslz Rvljiyou Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Nedswlkb Nepfx Aiyocu Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Ncedowz R Iuopfx Aiyeu Delivery time: by arrangement Freight basis: ex-works

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Ncjderyv S Aopfx Aiysu Length: 14250 mm, width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Nodpfxsxp Nu To Aiyocu Number of axis: 3 X- 600 mm Y- 800 mm Z- 1500 mm

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Ncsdpfoyg Eu Sox Aiyju Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Ncedpfxjx Ev Tko Aiyju Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, Year of construction: 1990, Colour: Blue Empty weight: 100 kg Dimensions (LxW): 120 x 80 cm Price: On request - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 5872695 - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Ncodpfx Aiozfgm Ejyou Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum