Used Dema for sale (728)

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Laedjxzqp Aepfx Ampoa -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE Lajdoxzq Sqjpfx Ampea -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Condition: excellent (used), Demag crane P-Zug 3.2 t – Type P208H11, four-strand, with fast and precision lifting. Length: 1150 mm, height: 350 mm, width: 330 mm. Ljdpfx Asyxbxxempjaa

Condition: excellent (used), DEMAG wheel motor 36/20 K6P for electric wire rope hoist P1600 optionally with coupling and brake disc Type 36/20 K6P, motor in good tested condition Armature / rotor / runner, bearing end shields, coupling, brake also available separately P2000 drum shell, rope drum, rope guide Ljdov Uai Aopfx Ampsaa

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS Laodpfx Amoyyyuuopja • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of production: 1999 Lsdpfx Aoyyyn Uempoaa • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg • Wittmann W633 • Robot No: W633 • X-stroke: 500 mm • Y-stroke: 1400 mm • Z-stroke: 2000 mm • Weight: 475 kg • Wittmann W743 • Robot No: W743 • X-stroke: 1200 mm • Y-stroke: 2000 mm • Z-stroke: 4000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP147/147.2/147.3, 1 Vetter wall-mounted slewing crane, 500 kg load capacity There are 3 cranes available in total!!! Type PW2.5-4.0 Jib length approx. 4m, load capacity 500 kg - 0.5 t Equipped with chain hoist, 500 kg lifting capacity (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 1999 Complete with wall bracket, jib arm, chain hoist, cable festoon system, trolley, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Lsdpfx Amjy D D Imspjaa Fully functional condition See pictures Dispatch via freight forwarder or pick-up Please inquire about shipping costs based on postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: GP55/179, 1 Vetter wall-mounted slewing crane, 500 kg load capacity / lifting capacity Crane available 2x!!! Type PW2.5-5.5 Jib length approx. 5.5 m, load capacity 500 kg - 0.5 t With chain hoist, load capacity 500 kg (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 2001 Complete with wall bracket, jib arm, chain hoist, cable trolley, end carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available Fully functional condition See pictures Shipping by freight carrier or collection Lodpoy D D Hcefx Ampoaa Please inquire about shipping costs according to postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: GP3180, Technical data: 1x Demag KBK 2 pillar slewing crane, rated load 500KG Rated load at full outreach: 500KG Height: approx. 3.5 + 0.3m column extension Underside of jib: approx. 3.3m Outreach: 3m Hook height: approx. 2.9m Total weight: approx. 600KG With Liftket 500KG chain hoist, year 2012 Incl. bolts, cable trolley, trolley drive, end cap, etc. Slewing range 300°, connection 400V 16A Lsdpfx Aey D D Adjmpjaa Crane is dismantled and immediately available Item location: 75053 Gondelsheim More cranes available, capacities 80–5000Kg, please enquire See photos Shipping by forwarding agent or collection by appointment only

Condition: ready for operation (used), Year of construction: 2005, clamping force: 5,000 kN, screw diameter: 70 mm, injection weight: 1,230 g, This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details. • Distance between tie bars: 900 mm • Min. mould installation height: 400 mm • Max. daylight (distance between platens): 1,450 mm • Centering ring: 160 mm • Core pull: 2-circuit core pull control (plus 1 extra core pull mentioned) • Control system: Demag NC4 Additional equipment • Handling unit: Wittmann linear robot, 3 axes (X/Y/Z linear) • Granule feeder: Wittmann, Typ VITMAX A312-Y (24 V, 1 A) • Hot runner controller: Gammaflux, Typ GM1G030F012S4EJ Ljdpfx Amoyycu Dopeaa

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Lajdpfx Amoyy Df Ropoa Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition

Condition: good (used), Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos Laodpfow Uxt Rex Ampsa -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR Wire Rope Hoist Crane 5 units available, see details below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m!! - 2-fall, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m!! - 2-fall, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m!! - 2-fall, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m!! - 2-fall, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m!! - 2-fall, year 2012 Ledpfxey D D S So Ampjaa With 2 lifting speeds, lifting height 12m, adjustable gauge (track width) of the hoist Each hoist supplied with pendant control and connection plug for power supply Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see pictures Item location: 75053 Gondelsheim Shipping possible, please inquire with your postal code

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Ledpfx Ameyxrt Topsaa

Condition: used, Year of construction: 2010, operating hours: 47,000 h, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lsdpsx E A Twefx Ampoaa

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Lajdpfx Amewlkb Njpoa Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Ledpfxjwlkcao Ampsaa

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Freight basis: ex-works Laedpfx Aswz R Iuompja

Condition: used, functionality: fully functional, Year of construction: 2009, Span: 35 m Lajdet D H H Aepfx Ampja Load capacity: 130 tons Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane

Condition: new, DEMAG brake ring / brake lining / cone brake lining – 50 pieces (new). 1. Type: KB 160 – 4 pcs. 2. Type: KB 100 – 2 pcs. 3. Type: KB 200 – 2 pcs. 4. Type: KB 140 – 2 pcs. 5. Type: KB 125 – 5 pcs. 6. Type: KB 112 – 1 pc. 7. Type: KB 90 – 2 pcs. 8. Type: KB 80 – 11 pcs. 9. Type: No. 405 – 1 pc. 10. Type: No. 616 654 – 5 pcs. 11. Type: No. 620 606 – 7 pcs. 12. Type: No. 612 648 44 – 6 pcs. 13. Type: No. 628 626 44 – 2 pcs. DEMAG brake hood / brake cover – 38 pieces. Various sizes (new / used). Laedpfjyy Takex Ampsa

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Complete package: used roller conveyor by Mannesmann Demag Lsdpfxoxv Df To Ampoaa Includes 45 x 3m non-driven straight sections, 20 x 45° curves, 10 driven sections with rubber belt, and a suitable number of supports and guides; all elements are 50.2 cm wide. All components originate from a cosmetics factory. The system spanned two floors, and the related documents are also available. It is also possible to purchase selected items only. Additionally, several boxes of spare parts are available.

Condition: good (used), Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg Laedpsip Erasfx Ampea

Year of construction: 1978, condition: good (used), machine/vehicle number: 2252928, load bearing: 500 kg number of burden strings: 1 stroe speed: 10 m/min Lasdpebpgvwefx Ampea electrical connection: 380 V, 1/0,25 kW weight: 69 kg

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Ljdpfjby Hpbjx Ampsaa Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Condition: used, Low-priced from company liquidation Laedpfx Amsyyarmopja