Used Deep Hole Drilling Machine for sale (66,922)

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Lhodpfx Ajzff A Ejl Ijh Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Lodpfx Aszdp U Nel Iohh Tapping capacity up to M16 8 tapping chucks Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm Lhsdpfxob A Ikio Al Ieh -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: used, Year of construction: 1970, Technical details: bore stroke: 170 mm total power requirement: 3,5 kW Lodpszgcx Hefx Al Iehh dimensions of the machine ca.: 0,75 x 1,10 m

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Lsdpfx Asw I Um Hel Iohh Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Lhsdpfx Ajy Ih Tzjl Ieh Location: 63934 Röllbach

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Lsdeyamc Dopfx Al Iehh Bit This item is an unused display unit.

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Lhodjw Naabopfx Al Ish Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Used machine Lhedpow I Uwxofx Al Ioh Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Lodpfx Aow Rhk Rsl Ishh Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Condition: Like new Lhodpfx Aov Ntb Iel Ioh Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Emergency stop switch. Runs in both left and right directions. Table dimensions: 660x560mm Maximum drilling depth: 150mm Lsdszfqz Tjpfx Al Ijhh Drilling depth is adjustable. Head and table are height-adjustable. Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Contact us for shipping options! €2,500.00

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Lodpszcnnajfx Al Iohh Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Lhodpoxzp Rlofx Al Ish Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests Lhsdpfx Aow U Uhkel Ioh 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Lhjdpovm Akgjfx Al Ieh universal head portable radial

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Lsdpfx Ajy D Hr Usl Iehh Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 30 mm throat 255 mm bore stroke 110 mm spindle turning speed range 80 - 3490 U/min spindle taper MT 4 table surface area 420 x 480 mm base plate 600 x 370 mm Lhsdpfot Smigsx Al Ieh Distance spindle/table max. 700 mm distance spindle/base plate 1200 mm voltage 400 V / 50 Hz total power requirement 1,1 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 1,2 x 0,7 x 2,3 m 2-stage motor, 1.1 / 1.9 Kw, drill chuck protection, drill chuck, work table rotatable and tiltable,

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, Lhodpfsy H Nvbex Al Ioh • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm Lhsdovcrmpopfx Al Ieh throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1974, Bohrleistung in Stahl (-Ø 35 mm throat 1000 mm workpiece height max. 200 - 1400 mm height adjustment 745 mm base plate surface area 1200 x 930 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 4 bore spindle stroke 350 mm turning speed range 60 - 1850 U/min feed range 0,09 - 1 mm/U Lodpfxjtv Igtj Al Iehh power capacity 3,7 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° Lhodpfotv Iklsx Al Ijh base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm Lhedpfx Aley Nfdaj Ijh grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW weight of the machine ca. 14,5 t

Condition: new, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Ljdsga Tyzjpfx Al Ijhh Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 RPM Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout, brand SINO * Automatic longitudinal feed for the work table * Drill chuck with taper ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Ejector pin * LED work light * Cooling system * Tapping function * Digital depth stop * Milling head with motorized height adjustment * Various tools in a case

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Lhodpfetpgcnsx Al Ijh Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH