Used Deckel Maho Dmc 100 V for sale (336)

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Lasdpeym R Tgofx Amrsc Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, DMG DMC 65H duoBlock Horizontal machining center Year of manufacture: 2013 Operating hours: approx. 50,000 h Spindle hours: approx. 26,000 h Siemens Sinumerik 840D sl control system Laodpoza Ezrjfx Amrsc HSK 63 tool interface Spindle speed: 10,000 rpm 180-tool changer 10-position pallet changer (2-level, i.e., footprint equivalent to a 5-position pallet changer)

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC Control: HEIDENHAIN MillPlus X mm: 600 Y mm: 700 Z mm: 550 B mm: -30 / +180 C degrees: 360 Number of pallets: 5 Table dimensions mm: 630 x 500 Table load capacity kg: 600 Cutting feed rate mm/min X, Y, Z: 10,000 Maximum rapid traverse rate m/min X, Y, Z: 30, 30, 30 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: 40 Torque Nm: - Tool changer type: Chain Positions in tool changer: 60 Maximum tool diameter: mm: 100 Maximum tool diameter with adjacent positions empty: 160 Maximum tool length mm: 350 Maximum tool weight kg: 10 Coolant tank capacity l: 750 Coolant through spindle: Yes Equipment: Chip extractor included 5-position automatic tool changer included Laedpfozbcy Isx Amroc Coolant through spindle included New spindle, 2024

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,082 h, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details. • Apparent power: 60 kVA • Nominal current (max): 86 A • Fuse protection: 100 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V Lsdpfx Aoy Ndibjmrjac Additional equipment • 2 hydraulically clamped clamping towers (workholding) Technical Specification Taper Size SK 40

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Lsdpfxsy Ib A No Amrsac Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Ljdpfezadkrjx Amroac

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Laedpfouqmvkox Amrsc Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Laodpjw Ew T Ssfx Amrec Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm Lodpfxjvxwxvj Amrsac workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, Laodjy E Np Sjpfx Amrsc BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Laodsy Iwdpepfx Amrjc Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) NC swivel head Tool holder: HSK 63 FD function Lodpfjy Ep Rtex Amrjac Pallet changer Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Lasdpfxey Iw H Rs Amrec

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant • Tool probe • Workpiece probe Laedpfx Asy D A Rgjmrsc • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production • Currently machining aerospace components • Test possible by appointment If you have any questions or need further information, please feel free to send us a message or call.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Ljdpfjyvp Dkex Amrjac Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment Lajdpfx Ajx D E Hhomrec • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Laodpsx T Dgnsfx Amrsc Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet Ljdpfoyi Ekfox Amreac • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm • Tool magazine: 60 positions • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun Lasdjx H U D Ropfx Amrsc • Oil and emulsion mist separator Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre including a Schuler automation. Contact us for more information. Additional equipment Lasdpfx Aoyaam Aomrjc • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Schuler automation • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, spindle hours 26748 (new spindle has 3,500 hours) • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel"Optional: more palletsServiced regularlyGeometry protocol dated 5 February 2026Regrinding of the spindle cone: €1,500–€3,000

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Additional equipment • Pallet changer: RS4 • Tool magazine: Omron Lasdpfx Amex D Hl Ejrsc Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Laedpfex Hbmfox Amrsc Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 180, controller manufacturer: Siemens, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, overall weight: 14,000 kg, table length: 630 mm, table width: 800 mm, controller model: 840D-Powerline, torque: 980 Nm, coolant supply: 40 bar, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 32,000 W, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 8,000 rpm, spindle speed (max.): 10,000 rpm, table load: 1,000 kg, operating hours of spindle: 22,963 h, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Laedpsui Np Rjfx Amrsc Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: HSK 63 Magazine capacity HSK 63: 60 tools Equipment: - 3D trajectory control MillPlus IT - Horizontal double gripper tool changer - Automatic swivel milling head - Rotating safety viewing window Lodeu Rnluspfx Amrjac - NC rotary table with pallet support - Pallet changer - 2 pallets, 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in combination with HSK 63 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent operation chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Siemens type Millplus Table dimensions 630x500 mm tool taper ISO 40 Cooling through the spindle 40 bar Tool changer 60 Pos. no. of tables 2 Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- Lajdpsyutv Tefx Amrjc binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team