Used Deckel Fp 5 Nc for sale (674)

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Tedpfjwl N R Nex Ahuof Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Year of construction: 2019, condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Tjdpfx Aevf Iy Dohuof

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Tedpfx Aourk Exohuef Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Tedswd N D Topfx Ahuof Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: used, X-way 800 mm Tedpfjbq Dbajx Ahuof Y-way 300 mm Z-way 400 mm Speed 40 - 2000 rpm. ISO 40 mounting Feed rate 10 - 500 mm/min. Spindle motor 2,2 KW

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Todpsv N Hmwsfx Ahuof Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Pallet storage: 5-station Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min Tedotqqllopfx Ahuof feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) Todpfxehtrd Ij Ahuef - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 2008, Partially overhauled milling machine Axes: 5 Tsdsv Acgyepfx Ahujf Control: Siemens 840 Solutionline Spindle: SK 40 / 18,000 rpm Equipment: 3D Quick Set for kinematic measurement, Heidenhain 3D measuring probe Handwheel Internal cooling system 40 bar Chip tray (no chip conveyor)

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC Tedocxxwaepfx Ahuef - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, 3 axes digital display Heidenhain ND780 Cooling device Mechanical central lubrication Rigid angle table X-way 400 mm Y-way 220 mm Z-path 400 mm Speed 25 - 2500 rpm feed stepless in 3 axes Rapid feed in 3 axes Spindle brake Vertical milling head movable on spindle stand 150 mm Vertical quill and horizontal quill - SK 40 extendable Todpfsbu U Nnex Ahusf Tightening system S20x2 Weight approx. 1400 kg

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen Todspn Rgvopfx Ahusf The machine corresponds technically the state of the art of the year of construction.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Todpfxstdnb Ee Ahusf drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Tedpfx Aomhfrrohuef Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Year of construction: 1976, condition: reconditioned (used), Universal tool milling machine Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 Tedpfoflc N Ajx Ahujf geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 with guarantee geometric acceptance with test report Todpshtq Edefx Ahuof Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Tedpfochfyfox Ahusf Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Tedpfofcqfpsx Ahusf Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Tsdpfx Aofzk Hfjhujf Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Tjdpfx Ahor En Dysuef Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 Todpfx Ahjd Tytyousf with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray Tjdolfc U Dopfx Ahuof - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Tsdpfx Ajh Rv U Eohuof Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system Tedpfjfzbtmjx Ahusf - Operating instructions -used, as seen-

Year of construction: 1978, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) Tjdpfx Asdf E H Ashujf - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -