Used Cyclone Separator for sale (6,916)

Condition: used, mileage: 46,100 km, power: 125 kW (169.95 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine, dimensions, or other features? Please do not hesitate to contact us. We offer attractive financing and leasing options – also for the Netherlands, Austria, and new businesses! Vehicle: Wheelbase: 3665mm Bsdpfs Ahu Siex Afmoww * 9G-Tronic automatic transmission * Single cab * Twin tires on rear axle * Gross vehicle weight 3.5 tons Technology/Comfort: Digital radio (DAB) * "Tempmatic" air conditioning * Cruise control * Electrically adjustable, extended, and heated exterior mirrors * Multifunction steering wheel * 71L main fuel tank * Armrest for driver's seat * Double passenger seat * 3-seater configuration * "Maturin" black fabric upholstery * Electrical pre-installation, configurable special module * Storage compartment above the windshield * Rear window * Front cupholders * Central locking with remote control * Electric front windows * Outside temperature display * Fuel filter with water separator Safety: * Crosswind assist * Lane keeping assist * Pre-installation for intelligent tachograph EU * Attention Assist * Halogen headlights * Outline marker lights * Side marker lights * Adaptive brake light * Seatbelt warning system * Jump-start terminals * Hill start assist * Hold function * Underrun protection (ECE) Refrigerated box: * Floor reinforced with anti-slip surface * Two rear doors with individual locking and 270° opening angle * Side door with individual locking and step * Combination anchor/tie-down rail (1 on the left & 1 on the right) * Interior and exterior LED lighting * Drainage holes in the front of the box * Double sealing system at the loading opening * Lateral underrun protection * Wheel arch with mud flaps Refrigeration unit: * ThermoKing V500X (-20°C) * Operation during driving and when stationary * Temperature recorder (thermograph) * Dual-temperature pre-installation Additional extras for the body are available for an additional charge. Note: Please call before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Condition: used, Year of construction: 2025, input voltage: 380 V, total length: 1,650 mm, total width: 1,800 mm, total height: 1,750 mm, tank capacity: 390 l, empty load weight: 1,650 kg, power: 11 kW (14.96 HP), SPRB-SPRS Series 400 V three-phase power supply Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Dough capacity 250 kg Flour capacity 166 kg Bowl volume 390 L 2-speed spiral Spiral motor 6.5 / 11 kW Bowl motor 1.1 kW Automatic speed change Bowl rotation by pulses Bowl rotation direction reversal Hydraulic tilting Discharge into hopper or divider Stainless steel bowl Dimensions L × W × H 1800 × 1650 × 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Weight 1650 kg Year 2022 Used self-tilting dough mixer 160, capable of handling 250 kg of flour, SPRS250 General description The MECNOSUD SPRS250 is a large-capacity, self-tilting spiral dough mixer designed for bakeries, pastry shops, and production units that need to prepare up to 250 kg of dough per cycle. Its fixed 390-liter bowl can hold up to 166 kg of flour. This SPRS version is equipped with a hydraulic tilting mechanism that allows the dough to be discharged at height directly into the hopper of a divider or other production equipment. A mixer designed for large-scale production The SPRS250 combines a two-speed spiral, an independently motorized bowl, and two electronic timers. The operator can thus program the two phases of kneading separately, with an automatic transition from the first to the second speed. This arrangement facilitates the repeatability of recipes and limits interventions during the cycle. Key advantages Maximum dough capacity of 250 kg Up to 166 kg of flour Fixed 390-liter stainless steel bowl Two spiral speeds Two independent electronic timers Automatic transition between the two speeds Two independent motors for the bowl and the spiral Bowl rotation direction reversal Bowl rotation by pulses Hydraulic tilting, reducing manual handling Direct discharge into a hopper or divider Robust construction suitable for sustained production Detailed technical specifications Brand MECNOSUD Manufacturer's model SPRS250 Type of mixer Automatic spiral mixer with fixed bowl Bodpfxozqd Iqj Afmjww Discharge system Hydraulic tilting at height Maximum dough capacity 250 kg Maximum flour capacity 166 kg Bowl volume 390 L Spiral speeds 2 speeds Spiral motor power 6.5 / 11 kW Bowl motor power 1.1 kW according to the manufacturer Motorization Two independent motors Cycle management Two electronic timers Bowl rotation Continuous, by pulses and reversible Transmission V-belts Bowl High-strength stainless steel Spiral High-strength stainless steel Central column Stainless steel Protective grill Stainless steel Unladen weight Approximately 1,650 kg Dimensions at rest Approximately 1800 x 1650 x 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Tilting footprint Approximately 2100 mm Data announced for this used unit Year 2022 Power supply 400 V three-phase Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Bowl capacity 84 L Discharge direction To the right Type of controls Electromechanical

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW Bwjdpfx Afszk Nmrsmjw - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: excellent (used), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, machine/vehicle number: DS-62-607, total length: 1,760 mm, total width: 1,610 mm, total height: 2,085 mm, overall weight: 1,120 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, table height: 900 mm, input current: 14 A, This Q-Fin DS600 comes from our showroom in Bergeijk and is now available for sale. The machine has only been used for demonstrations and is therefore in excellent condition. The DS600 is fully operational and can be inspected and tested by appointment in our showroom. The DS600 is a powerful stand-alone slag hammer for the quick and efficient removal of metal slag from thermally cut sheet metal up to 600 mm wide. The machine is specially designed to effectively remove slag formation after the cutting process, making it an ideal first step in the finishing process. By removing metal slag in advance, it is prevented from causing damage to subsequent machines during further processing. In addition, the DS600 reduces contamination within the production process and positively influences the lifespan of abrasives and other consumables. The DS600 offers an efficient alternative to the manual removal of metal slag. This significantly reduces the physical strain on operators and allows products to be processed faster and with a more consistent quality. Thanks to its stand-alone design, the DS600 can be easily used as a separate machining unit or as a preparation for a subsequent finishing process. The Q-Fin DS600 combines speed, ease of use, and effective slag removal in one compact solution. This makes the machine particularly suitable for sheet metal processing companies that want to optimize their production process and reduce manual operations. Bwjdpfx Ae Agm Rvsfmow This machine is immediately available from our showroom in Bergeijk. Please feel free to contact us for more information or to schedule a demonstration.

Condition: used, Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal N Bsdpfxe Af Icrs Afmeww Included in the scope of delivery: 01x Pallet racking upright, used Material color: anthracite black (rusted) Profile dimensions: 100 x 65 x 2.5 mm Includes cross and diagonal braces and base plates The uprights are pre-assembled (welded framework) Height: 3,400 - 3,300 mm Depth: 1,100 mm Notes: We offer this item exclusively for "private" use, as due to rust and minor damage, it is no longer suitable for commercial use. The item is offered for sale in its current condition, as is, no returns. One-time special price. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Equipment: bathroom, lighting, 8 m office container / shipping container – with WC, storage & complete equipment – immediately available! ----- PRICE: €7,500 negotiable, ex works Dunkerque, France ----- BRIEF & TO THE POINT: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, high-voltage power supply, awning ✅ Immediately available – only 2 units available! ----- DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in very good condition – perfect as office containers, construction site containers, or storage containers. The containers come from the equipment of the French company CARGLASS and are of high-quality construction. All technical components are intact and ready for immediate use. The condition is guaranteed and documented in the invoice. Dimensions: 8m x 2.45m x 3.20m = 7t ----- Equipment overview: ✅ Separate WC with sink ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning unit ✅ Electric awning 3x7 m with remote control ✅ High-voltage connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher ----- Special features: ✅ Practical room layout: office – WC – storage ✅ Original images – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, immediately ready for use ----- DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (excluding unloading): on request € ✅ Immediately available: 2 units ex works Dunkerque, France ----- Bodpfj Ahniyox Afmsww Inquire and reserve now! We will gladly send you further photos, technical drawings and details on request. NAUTEXA GmbH

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Bwsdpfx Aezt Ipksfmsw Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm Bwodezukp Aopfx Afmow -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: used, Inject Star P 60 Bone Separators Bwedpfezu Ddasx Afmsw

Condition: used, Year of construction: 2015, ALLU DS 4-12 bucket separator / screening bucket – manufactured in 2015 – 2,070 kg. For sale: an ALLU DS 4-12 bucket separator/screening bucket, manufactured in 2015. High-quality Finnish ALLU attachment for processing a wide variety of materials directly on the construction site. Technical data: * Manufacturer: ALLU Finland Oy * Type: DS 4-12 Bwjdpfxjz Dm Nbj Afmow * Year of manufacture: 2015 * Serial number: DS41215444 * Weight according to nameplate: 2,070 kg * Recommended hydraulic oil flow: 95–160 l/min * For excavators approx. 20–35 t * 4 drums * Robust heavy-duty design Possible applications: * Sieving soil and topsoil * Construction rubble and recycled materials * Gravel and sand * Compost and biomass * Processing and separating soil material * Depending on the shaft configuration, also crushing and mixing The ALLU D series is designed for sieving, crushing, mixing, aerating, and loading material. Condition: used, with signs of wear and tear commensurate with its age. Inspection possible by appointment.

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Bwodpfx Aezg I Uyefmow Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Bsdpfx Aozgf A Ujfmoww Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, Allgaire Large Vibrating Sieve 4 filter screens Screen diameter 1200mm High Efficiency: Achieves separation efficiencies up to 99% Bsdpfjzz N Rxox Afmoww Gentle Treatment: Low-acceleration kinetic movement prevents particle destruction Ideal for fragile products Screen Cleaning: Equipped with integrated bouncing balls Heavy-duty German engineering with dust-tight cover options and quick-clamping elements.

Condition: good (used), Russell Finex 17240 Vibratory sieve Bsdpfez At Hmsx Afmjww Stainless compact vibratory sieve, 550mm mesh diameter, with magnetic separator, mobile, 3Ph

Condition: new, Big-bag emptying station with cyclone separator Bodpfxozpw U Uo Afmeww For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Condition: used, Stanzkraft: 550 kN (e.g. punches holes 30 mm in 16 mm material), with locating device via foot pedal to anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Bsdpfxet Expro Afmsww Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: ready for operation (used), Year of construction: 2004, screw diameter: 125 mm, Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details. • Screw type: Single screw • L/D ratio: 35:1 (35D) • Number of screws/mechanical shafts: 1 • Output capacity: Approx. 350–550 kg/h (material dependent) • Main motor: AC electric with inverter drive (VFD), 110–160 kW (standard for Ø125 mm) • Screw speed: Electronically adjustable, approx. 0–120 RPM • Transmission: Heavy-duty, oil-cooled gearbox • Barrel heating zones: 6–8 independent zones • Heater type: High-efficiency ceramic band heaters Bsdpfx Afe Af U Dnsmoww • Barrel cooling: Forced-air cooling fans per zone • Degassing/venting: Double vacuum degassing system with liquid ring pump Additional equipment • Feeding system: Force feeder / crammer hopper for film flakes and shredded regrind • Screen changer: Continuous hydraulic dual-plate screen changer • Pelletizing: Hot die-face water-ring pelletizer • Cooling & dewatering: Horizontal centrifugal dryer and vibrating classifier screen • Conveying & storage: Pneumatic blower to cyclone and bagging silo

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 31,000 mm, total height: 4,000 mm, total width: 8,000 mm, workpiece weight (max.): 100 kg, input voltage: 230 V, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, fuel: electricity, sheet thickness steel (max.): 900 mm, We offer this ready-to-use GEMA powder equipment with single stage pre-treat systems and 2 x ovens, manufactured in 2012. Manufacturer: GEMA Construction year: 2012 Equipment type: Powder coating equipment Full working Compact Powder Coating Plant consists of below 1 x SINGLE STAGE PRE-TREAT PLANT 1 X DRY OFF OVEN 1 X GEMA QUICK COLOUR CHANGE POWDER BOOTH WITH RECIPROCATORS, CYCLONE AND AFTER FILTER 1 X OVERHEAD CONVEYOR SYSTEM Bedpfx Afs Agc D Ssmoww 1 X TUNNEL OVEN If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, control type: CNC control, controller manufacturer: Mazatrol, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, overall weight: 12,700 kg, total length: 8,500 mm, total width: 4,500 mm, total height: 2,800 mm, Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Automatic sheet loading and unloading system – Large overhead gantry with integrated sheet handling equipment, suitable for automated material transfer. Mazak CELL 510 VA automation system – Separate automation control cabinet, identified by its nameplate and operating panel. Automatic pallet changer / shuttle table – Two cutting pallets allow material preparation and unloading while the machine processes another sheet. Dust extraction equipment – Large extraction ducting and associated equipment visible, although the complete filtration installation cannot be verified. Safety enclosure – Perimeter safety fencing with access gates and emergency-stop controls around the automation system. Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Electrical cabinet manufacturing: Cutting enclosures, control panels and mounting plates. Bjdpfxs Agfxns Afmsww Main technical specifications Working area: Approximately 3,050 × 1,525 mm Mild steel cutting capacity: Up to 25 mm Stainless steel cutting capacity: Approximately 12 mm Aluminium cutting capacity: Approximately 10 mm Working area X Axis: 3050mm Working area Y Axis: 1525mm Working area Z axis: 150mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4000kW / Amp Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Sheet master loading arm:yes Dust collector: yes Length: 8500mm Width: 4500mm Height: 2800mm Weight: 12700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: w3-1200, CNC Vertical Machining Center VICTOR V-CENTER 85 – 2003 – High Pressure – Chip Conveyor For sale, a CNC vertical machining center, VICTOR V-CENTER 85, manufactured in 2003. A robust and versatile industrial machine designed for milling, drilling, tapping, and precision machining operations. Equipped with a high-pressure coolant pump and a chip conveyor, allowing for better chip removal and efficient cooling during machining. General Specifications Brand: VICTOR Model: V-CENTER 85 Year of Manufacture: 2003 Type: CNC Vertical Machining Center Number of Axes: 3 Axis Travels X-axis Travel: 850 mm Y-axis Travel: 520 mm Z-axis Travel: 560 mm Work Table Table Dimensions: 1,100 × 510 mm Maximum Permissible Load: 750 to 1,000 kg Spindle Bwedpfx Afo Agvwlemsw Spindle Taper: BT40 Maximum Speed: 8,000 rpm Motor Power: 5.5 / 7.5 kW Tool Magazine Capacity: Up to 24 tools Tool Change: Automatic Equipment and Options High-pressure coolant pump Chip conveyor Coolant system for cooling tools and workpieces Automatic tool changer Dimensions and Weight Length: Approximately 2,450 mm Width: Approximately 2,400 mm Height: Approximately 2,640 mm Weight: Approximately 5,950 kg Dimensions and weight are approximate and may vary depending on the version and installed equipment. The footprint of the chip conveyor should be verified separately. Additional Information Machine can be viewed by appointment in Sprimont, Belgium. Price indicated excludes VAT – VAT is recoverable according to applicable conditions. For further information or to arrange a visit:

Condition: good (used), Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet racking beam, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0480 Agraffe: 4 HK (hooks) Clear width: approx. 2,700 mm Max. load per beam pair: 1,500 kg with evenly distributed load Bwedpfx Afs Agvu Ajmow 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2007, functionality: fully functional, Window and door component production line Manufacturer: WEINIG, Type: UC-Matic Year of manufacture: 2007 Line consisting of: Pos. 1: Infeed Unirex 2000 Transverse + longitudinal conveying system PHV R For the indirect feeding of both identical and different workpiece lengths. System consisting of a transverse conveyor and a roller conveyor - Transverse conveyor, 6 lanes - Loading area for manual filling. - Automatic buffer zone - Automatic part separation using a clamping and reversing device - Transfer to a roller conveyor - Roller conveyor, powered - Pneumatically height-adjustable Adjustment travel, max.: 25 mm Transport length: 2300 mm Roller width: 160 mm Roller diameter: 50 mm Roller spacing, graduated: 120-825 mm Transport speed, fixed: 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 2: Conveyor belts Conveyor belt, powered (TB 250) With center guide Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 3: Machining center Weinig Unirex 2000 Pos. 4: Transport between machines with double part formation Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor – infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Transverse conveyor, 7 lanes, height-adjustable Turning device WVU in the transverse conveyor, including options For changing the end face of workpieces. Rotational movement motorized 180° around the vertical axis. Pneumatic height adjustment of the turning device up to the max. wood height (100 mm) 4 x Additional automatic buffer zone (max. 8 zones) Pos. 5: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Pos. 6: Transverse machining Weinig Unitec 15 1. Tenon and groove spindle 2. Tenon and groove spindle Pos. 7: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 8: Longitudinal machining Weinig Univar 12 1. Profiling spindle 2. Profiling spindle Profiling cutter head, horizontal, top 3. Profiling spindle Profiling cutter head, vertical, right Profiling cutter head, vertical, top (in the auxiliary stand) Profiling cutter head, horizontal, bottom (in the auxiliary stand) Pos. 9: Turning system with clamping device Pos. 10: Outfeed of the line Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor - infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Roller width: 230 mm - Roller diameter: 50 mm - Roller spacing, graduated: 120 - 825 mm - Transport speed, fixed: 20 m/min. Bodpfx Afs Agvhpemjww - Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz - Stop height: 30 mm - Transverse conveyor, 7 lanes, height-adjustable - Adjustment travel: 25 mm - Conveying and stacking length: 3000 mm - Support width: 2000 mm - Working height, adjustable: 820-1050 mm - Conveying speed, fixed: 10 m/min. - Moto

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Bsdpfxe Agvygs Afmjww Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Year of construction: 1994, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, number of axes: 3, This MIKRON BTM 2000 surface grinding machine was manufactured in 1994. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a maximum table load of 3,500 kg and a spindle speed of up to 4,000 rpm. If you are looking to get high-quality surface grinding capabilities, consider the MIKRON BTM 2000 machine we have for sale. Contact us for further details. Bodpfx Afj Agvq Hemsww - Not fully functional; error message "Grober Positionierfehler" (Gross positioning error);- Electronic Handwheel: Heidenhain HR 330 - Maximum Table Load: 3,500 kg - Rapid Traverse (X/Y/Z): 15 m/min each - Milling Head: Manual universal milling head - Spindle Speed: Up to 4,000 rpm (min⁻¹) - Tool Taper / Holder: ISO 40 according to DIN 2080 - Linear Measuring System: Direct Heidenhain LS 106 C linear scales in X, Y, and Z - Drive Technology: Siemens SIMODRIVE 611 - Working Area Enclosure: Sliding doors and strip curtain / lamellar splash guard - Cooling / Auxiliary: Separate cooling unit / aggregate - Maintenance History: Y/Z-slides overhauled by a specialized company approx. six years ago

Condition: good (used), Year of manufacture: 2020 Design year: 2020 Technical condition: good Visual condition: good HIAB X-HIPRO 358 E-6 COMPLETE LOADING CRANE – 6-STAGE HYDRAULIC EXTENSION – RADIO REMOTE CONTROL Well-maintained and fully equipped HIAB X-HiPro 358 E-6 loading crane, year of manufacture 2019. The crane has a 6-stage hydraulic extension and features additional 5th and 6th hydraulic functions extending to the end of the crane. This allows hydraulic attachments such as a rotator, grapple, or other hydraulic tools to be connected and operated. Complete with radio remote control, hydraulic tank, separate rear outrigger set, and crane documentation. GENERAL DATA Manufacturer: HIAB Type: X-HiPro 358 E-6 Year of manufacture: 2019 Serial number: 3580234 Design: E-6 Hydraulic extensions: 6-stage Operation: Radio remote control Additional hydraulic functions: 5th and 6th function Suitable for: Rotator / Grapple / Hydraulic attachments Outriggers: Rotating support legs CRANE DESIGN The HIAB X-HiPro 358 E-6 is a powerful loading crane for professional transport, construction, assembly, and lifting work. Bjdpfx Aez H Tkkofmsww With its 6 hydraulic extensions, the crane offers a large hydraulic reach. The additional hydraulic functions make this crane particularly interesting for companies that want to use various hydraulic attachments. Suitable for, among other things: - Transport and crane operations - Construction and assembly work - Loading and unloading of machines and materials - Work with hydraulic rotator - Work with grapple - Use of various hydraulic attachments - Mounting on a suitable truck chassis RADIO REMOTE CONTROL The crane is equipped with a HIAB radio remote control. This allows the crane operator to operate the crane from a safe position and have an optimal view of the load and the working area during operations. Complete including charger for the radio remote control. 5TH AND 6TH HYDRAULIC FUNCTION The crane has an additional 5th and 6th hydraulic function. This allows various hydraulic attachments to be operated directly via the crane, for example: Hydraulic rotator – Grapple – Clamshell grapple – Stone grapple – Pallet fork or other hydraulic tools. COMPLETE REAR OUTRIGGER SET The crane includes a complete separate HIAB rear outrigger set. Type: 458-8125 Year of manufacture: 2020 The additional rear outrigger ensures high stability of the vehicle during crane operations when properly installed. HYDRAULIC SYSTEM Supplied complete with: Hydraulic tank Mounting brackets for hydraulic tank Hydraulic equipment for the crane 5th and 6th hydraulic auxiliary function This means that many important components for mounting the crane on a suitable truck chassis are already included. INSPECTION & DOCUMENTATION The crane is supplied with: Valid ABOMA / TCVT inspection Crane papers / documentation*