Used Ctx Beta 500 for sale (16,062)

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m Bdodpfehid Erox Akisi feed pressure 16 bar liter capacity 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 63 mm, total width: 1,935 mm, total height: 70 mm, total length: 1,935 mm, conveying length: 1,935 mm, construction width: 540 mm, construction height: 70 mm, TAF article number: 1000004163 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 1,935 x 540 x 70 mm (LxWxH) Cheek width: 540 mm Bsdpfjucwuyox Akijdi Cheek height: 60 mm Conveyor length: 1,935 mm Conveyor width: 500 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 62.5 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: new, 0 1170 x 580 x 580 mm Bedpsupxd Djfx Akiedi operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description: Mitutoyo Manufacturer: Mitutoyo Type: CV-500 Bsdpfx Aketxyv Ioiodi The Contracer is complete with PC, software, monitor and vice.

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = Bdjdpfxjuxviqs Akiei - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Axle Configuration Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! 2 AVAILABLE FROM STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Bjdpfx Asywi Daokiedi

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t Bdjdpsylz D Hsfx Akioi table height / mm

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp MultiGrip bucket / MG.015.050 / MS01 / 500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,420.00 net / €2,879.80 gross - Excavators up to: 1.5 tons - Weight approx.: 55 kg - SAE capacity: 33 liters - Cutting width: 500 mm - Maximum opening: 340 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grab, into a single tool. Advantages of the Holp MultiGrip bucket: - Cylinder with hardened piston rod - Only the grab swivel lines are needed for operation - Robust mounting in the side wall - Safe gripping and transporting - Stable shafts connect the two fingers (forming a 3-point grip for small parts) - Significantly lighter than a grab - Up to 30% more earth can be loaded into the bucket during excavation work - Minimization of damage caused by falling material The MultiGrip is suitable for all excavation and grabbing tasks; it is ideal for moving stones, filling earth, and grabbing wood and brush, and it is significantly faster than a grab. It can grab and sort all types of materials, even earth or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] or [email address] for more information. Upon request, we will be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. Bdedpfxjyl Hdfj Akiei We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,480 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Air conditioning - Air-suspended seats - PTO - Sun visor EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 Euro 6e L13 EuromixMTP EM 9 L New vehicle – without registration Vehicle equipment: Engine: Volvo D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm Torque: 2,500 Nm at 1,000–1,400 rpm Emission standard: Euro VI Stage E (Euro 6e) Transmission: AT2612, 12-speed I-Shift automated manual transmission, suitable for gross vehicle weights up to 60 t Engine brake: Volvo Engine Brake+ with exhaust pressure regulation, max. 375 kW Wheelbase: 4,350 mm Design gross vehicle weight: 44 t Axle ratio: 3.33:1 Front axles: 2 × 8 t (16 t), 3-leaf parabolic springs Fuel tank: 290 liters, left between 1st and 2nd axles AdBlue tank: 57 liters, right between 1st and 2nd axles Rear underrun protection: Aluminum, fixed, EC-approved Tires: 315/80 R22.5 front and rear Tire pressure monitoring system I-See predictive cruise control (map-based) Cruise control with I-Roll and I-Cruise, operated on the steering wheel 12" fully digital instrument cluster DPF regeneration switch for manual control Electronic stability control (ESC) Collision warning system with emergency braking system (AEBS) Electronically controlled air conditioning with sun sensor Concrete mixer equipment: Model: EuromixMTP EM 9 L Nominal volume: 9 m³ ready-mix concrete Mixing drum in lightweight design made of HARDOX S450 Mixing spirals in lightweight design made of HARDOX S500 Gearbox: ZF P5300 Hydraulic pump and hydraulic motor: Bosch Rexroth Integrated oil cooling system: ASA Mixing control mechanical, start/stop electrical Compressed air-water system Water connection on the platform with hose Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with platform Rubber insert on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Drum locking mechanism to secure during maintenance Bdsdpfjypa Ufjx Akiei Polyurethane primer Emergency stop function according to EU safety technology Aluminum fenders over the rear axles 2 extension channels made of steel or plastic Weight superstructure: approx. 3,425 kg (± 5%) Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica | ...

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Sun visor = Notes = EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 Euro 6e L13 EuromixMTP EM 10 L New vehicle – without registration Vehicle equipment: Engine: Volvo D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm Torque: 2,500 Nm at 1,000–1,400 rpm Emission standard: Euro VI Stage E (Euro 6e) Transmission: AT2612, 12-speed I-Shift automated manual transmission, suitable for total vehicle weights up to 60 t Engine brake: Volvo Engine Brake+ with exhaust pressure regulator, max. 375 kW Wheelbase: 4,350 mm Design total vehicle weight: 44 t Axle ratio: 3.33:1 Front axles: 2 × 8 t (16 t), 3-leaf parabolic springs Fuel tank: 290 liters, left side between 1st and 2nd axle AdBlue tank: 57 liters, right side between 1st and 2nd axle Rear underrun protection: aluminum, fixed, EC approved Tires: 315/80 R22.5 front and rear Tire pressure monitoring system I-See predictive cruise control (map-based) Cruise control with I-Roll and I-Cruise, operated on the steering wheel 12" fully digital instrument cluster DPF regeneration switch for manual control Bdedpeypa Uxofx Akiei Electronic Stability Control (ESC) Collision warning with emergency braking system (AEBS) Electronically controlled air conditioning with sun sensor GSR-compliant rear view camera at the end of the frame Toll preparation for Toll Collect (Germany) Concrete mixer equipment: Model: EuromixMTP EM 10 L Nominal volume: 10 m³ ready-mixed concrete Mixing drum in lightweight construction made of HARDOX S450 Mixing blades in lightweight design made of HARDOX S500 Gearbox: ZF P5300 Hydraulic pump and hydraulic motor: Bosch Rexroth Integrated oil cooling system: ASA Mixing control mechanical, start/stop electrical Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica = Additional Information = Year of construction: 2026 Usable material: Concrete Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 GVWR: 44,000 kg Superstructure brand: EuromixMTP EM 10 L Please contact Harun Cevik, Jamila Azzi, or Denis Omeragic for further information.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Bdsdpfx Aoyrqpfokiji Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Bdjdoy A H Tpepfx Akioi Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Bjdjy H Hkpspfx Akiedi Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories Bsdpfxoy Hqyho Akisdi MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². Bdsdpfx Aox S Hzlskisi F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Year of construction: 2026, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary. Bodpfxjqvmn Ne Akijdi

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 63 mm, total width: 540 mm, total height: 70 mm, total length: 1,000 mm, conveying length: 1,000 mm, construction width: 540 mm, construction height: 70 mm, overall weight: 14 kg, TAF article number: 1000005067 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,000 x 540 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor length in mm: 1. 000 Conveying width in mm: 500 Substructure: not available Idler type: Threaded rod M8 / nut M8 Idler diameter in mm: 50 Idler per axle: 1 Idler material: Plastic Roller pitch in mm: 63 Drive: Gravity Bsdpowz Np Rjfx Akiodi Net weight in kg: 14 Function test: OK Condition: Used, fully functional

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Bdodpfxexl Dp De Akiji Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: used, mileage: 297,500 km, power: 375 kW (509.86 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Palfinger Epsilon long timber crane type S260L97 with Palfinger FG57X log grapple. Floor and high-seat controls, load moment [kNm] 229, stowage above cab, * Fully serviced with maintenance record ---- ----* Volvo Dynamic Steering (VDS) * 12-speed automatic transmission * VEB+ (Volvo Engine Brake Plus) * Rear axle with air suspension * Anti-lock braking system (ABS) * Retarder * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in cab * Lane departure warning with steering assistance (LSS-DWC) * L cab (long version) * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Refrigerator in cab * Rain sensor * Electric windows for driver and passenger doors * Central locking with remote control * Immobilizer (transponder) * Engine-driven PTO * Two additional reverse crawler gears * Volvo I-Shift transmission * Automatic climate control * Auxiliary air heater * Driver's seat heating * Cab noise insulation * 6-cylinder engine * Telematics gateway with 4G * 285-liter fuel tank * 170-liter fuel tank * 90-liter AdBlue tank * Beacon lights left and right * Euro 6 engine version * Cruise control * Double PTO * Trailer recognition with LED sensor * Air-suspended driver's seat * Lower bunk * Driver comfort package * EBS (Electronic Braking System) * No spare wheel Bdodpfexl Iinjx Akisi ----Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will be happy to provide you with a leasing or financing offer.

Condition: used, Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA, 50-60 Hz Switching group: Dyn 5 Code: 9129 IP: 23 Primary: 500 V, 12 A Bdodpfjxl Tbvsx Akiji Secondary: 399/231 V 380/220 V 361/209 V 15.15 A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2016, Marel labeling machine - Concept 500 - Top labeller Bjdpfxsxnkh Sj Akijdi More photos and full specifications: /

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. Bjdpfxjxfl Axs Akisdi No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), functionality: fully functional, roll diameter: 48 mm, roll width: 48 mm, roll pitch: 85 mm, total width: 600 mm, total height: 620 mm, total length: 4,750 mm, conveying length: 4,750 mm, construction width: 600 mm, construction height: 620 mm, empty load weight: 80 kg, TAF item number: 1000005688 Manufacturer: Nestaflex Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,400 x 600 x 620 Width incl. drive: 600 Conveyor length in mm: from: 1,400 to: 4,750 Conveyor width in mm: 500 Bsdpex Dmx Eofx Akiedi Conveyor height in mm: from: 620 to: 950 Load capacity between 2 feet: Number of feet: 4 Roller type: steel Rollers per axle: 5 Roller spacing in mm: 85 Roller diameter in mm: 48 Net weight: 80 kg Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h Bdodpszwdn Dsfx Akisi -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg Bdedpfszlyp Hox Akiei