Used Cross Cut Destacker for sale (17,410)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 241306, saw blade diameter: 500 mm, cutting height (max.): 170 mm, cutting width (max.): 395 mm, power: 7.5 kW (10.20 HP), borehole diameter: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Saw blade diameter min.: 490 mm Saw blade diameter max.: 500 mm Saw blade bore diameter: 30 mm Feed table length: 5,640 mm Output table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Klodpfxsy Akvne Akzjt Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Transport weight: 800 kg Transport packages: 3 EQUIPMENT Automatic feed system

Condition: used, 4 dividing saws Saw blade max.: 700 mm Cross-cut capacity: 180 x 220, 160 x 300 mm Saw motor: 4 kW Kedpfx Akjy R Eixjzolt

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Kljdpfxjw Sy T Ho Akzjt

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Kledpfx Akoyw Tzijzet

Condition: new, Year of construction: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Kjdoiy Ry Aopfx Akzslt Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Klodpfx Ajy Hqdajkzot Weight: 490 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Kledpfx Asqnvtzekzot Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Kledpfefg U H Nex Akzst Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Klsdpfx Akewk Himozst Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Ksdpfswk Iphsx Akzelt Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, Semi-automatic optimising crosscut saw with electronic positioner with push-stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. Klsdpfxsg Hzvge Akzet FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified.

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Kedpfxouiwqho Akzolt Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Kjdpfxjw Nbhmo Akzjlt Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Kljdpfx Ajyv Ewmjkzot Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 Kjdpfx Akev Diy Ajzjlt DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines Kljdjy Edlhjpfx Akzst • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Klsdpfx Ajkv Untekzst Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Kedpfxey Sinzs Akzolt Saw blade diameter: 300 mm Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: good (used), Year of construction: 1964, functionality: fully functional, power: 14 kW (19.03 HP), cutting width (max.): 2,500 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, actuation type: electric, working length: 2,500 mm, Equipment: documentation/manual, saw blade guard, scorer, Cutting depth approx. 250 cm Kledpfx Ajy Ifp Tekzst Cutting width approx. 250 cm Left and right saw blade tiltable by 45° Additionally, left and right a scoring unit for chip-free cutting of laminated panels and solid wood Electric width adjustment. Pneumatic clamping for panels and battens, etc. 2x2 kW per scorer motor 2x5 kW per saw motor Complete documentation available. Additional spare saw blades included.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 500 mm, power: 10 kW (13.60 HP), New Optimizing saw SALVAPUSH 2000 by SALVAMAC The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick and easy communication. Kjdpfx Aksd Tyf Uozslt Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. The touch screen, with USB and teleservice connections, facilitates data reading and typing. By Christian Salvador- SALVAMAC

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) Kljdpfxjywtr Us Akzot (Prices may change with significant fluctuations)

Condition: not inspected (used), functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, total height: 600 mm, total length: 700 mm, total width: 500 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. MACHINE DETAILS Kodpfx Ajyr Nvwjkzjlt Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 600 mm Machine weight: 150 kg External reference: Lot 78

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Klodjdy Hrdjpfx Akzot Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: excellent (used), Year of construction: 1994, Maximum cutting width 250 mm Length of feed table 3 m Length of discharge table 3 m Year of manufacture 1994 Motor power approx. 2.2 kW Klsdpfx Akoy Ivg Aozst Voltage 400 V Weight 600 kg Very good condition

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum infeed material length: 5000 mm Ksdpfx Akey E Shkezslt Minimum/maximum wood width: 20-300 mm Minimum/maximum wood thickness: 10-100 mm Possibility of bundle cutting Defect cutting in material CE Certificate DTR documentation Reference image of the machine