Used Crop for sale (98)

Condition: used, This listing is for a Thermo Labsystems Multiskan Ascent Microplate Reader The Thermo Labsystems Multiskan Ascent is an advanced, compact, one-channel vertical light path filter photometer designed to perform standard photometric measurements. The measurement types include end point, two point and kinetic measurements. Due to the innovative optical system of the Multiskan Ascent, the instrument can read both 96- and 384-well microplates and is linear to 4.0A. The instrument is a rapid reading microplate reader. Gbodpfexzhctjx Aikew

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction Gedpfezrzizsx Aikebw – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate.

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Gbjdpjz Iq U Nofx Aikow Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: good (used), functionality: unexamined, machine/vehicle number: VBP00065013000009, Year of construction: 2021, The PÖTTINGER TERRASEM V 6000 DZ is a modern universal seed drill designed for precise sowing of cereals and cover crops, with the option for simultaneous fertilizer application. It is part of the TERRASEM series from the manufacturer Pöttinger. Basic Information: Type: Combined seed drill (seedbed preparation + sowing combination) Production: approx. 2021 – present Application: Conventional, minimum tillage, and no-till systems Option: Sowing + fertilizing ("DZ" version = dual hopper / dual system) Technical Specifications: Working width: 6 m Transport width: 3 m Gbsdpfx Asy Em H Usiksw Number of rows: 48 Row spacing: 12.5 cm Press wheel diameter: approx. 380 mm Hopper capacity: up to ~5600 L (split, e.g. 40:60) Required tractor power: approx. 180 – 250 HP

Condition: used, Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: 0000657225, For sale: EWM Microplasma 105 welding machine. This is a fully functional complete set including cooling unit, trolley, torch, and spare consumables. Maintenance and calibration by EWM were performed in 2025. The machine is highly suitable for welding thin materials or for cladding tool steels during die and press tool repairs. We purchased the machine in 2024 as ‘nearly new’ from a company in Plzeň. Due to a change in production focus, we no longer require this machine. Gedsy Hpaaepfx Aikobw

Condition: used, Year of construction: 2019, Suitable for cleaning cutting fluids used in grinding carbide. Equipment: - 1 filter housing - Manual backwash Filterleistung: 120 l/min Tank capacity: 550 l Dimensions L x W x H: 1590 x 1150 x 1975 mm mass: 750 kg Connected load: 2,2 kW (400 V/ 50Hz) colour: Light gray Gbedpfxs Ah Et So Aikjw

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: Gbsdpeymciasfx Aikjw - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

Condition: used, Shearing force: 500 kN (punching e.g. 28 mm into 13 mm material) Cuts 200 x 20 mm on the sheet metal shear Three-point kinematic link Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Gbodpfx Ao Aggdaeikew Large assortment of tools Contact length stop

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² Godjuc Sw Aopfx Aiksbw coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Gedpfx Aisznx Ndokobw

Condition: used, This listing is for the Grant Bio PMS1000 Microplate Shaker The unit is in full working condition and is ready for immediate use Overview of the Grant bio PMS‑1000i Microplate Shaker Applications Gsdpfx Ajxhfntsikjbw Ideal for mixing, incubation, and cultivation of biological or chemical samples in disciplines like microbiology, immunology, molecular biology, and biotechnology. Common uses include immunoassays, high-throughput screening, colorimetric testing, and binding assays involving magnetic beads. Improves reproducibility by ensuring proper resuspension of PCR products, aiding in consistent optical density readings and better plasmid DNA yields. Key Features Shaking mechanism: Driven by a brushless, direct-drive motor, providing smooth and reliable motion. Speed range: Adjustable from 150 rpm to 1200 rpm, suitable for both gentle mixing and vigorous agitation. Plate capacity: Supplied with a platform for 2 microplates (standard-depth 96-well or 384-well), with an optional accessory (MPP‑4) for supporting 4 plates. Controls and display: Features a simple dial for speed adjustment, a 4-digit LED display indicating rpm and remaining time, plus a built-in electronic timer (1 min to 24 hours) with automatic shut-off. Secure plate fitting: Uses screw fittings to firmly hold plates in place, minimizing slippage during shaking. Technical Specifications Orbit diameter: 2 mm Dimensions: 90 mm (H) × 205 mm (D) × 220 mm (W) Operating temperature: 4 °C to 40 °C Power and consumption: External power supply (AC 120–230 V to DC 12 V), approximately 3.4 W (0.28 A)

Condition: used, 6166 000, TiMix 5, microtiter plate shaker Gbjdpfx Aeuz Ebhsikew Model: 6166 000 Type: TiMix 5 Condition: Used

Condition: used, This listing is for 1 of 2 Mikura Autura 1000 Microplate Washer Gedsxzg Axepfx Aiksbw The Mikura Autura 1000 is an automatic microplate washer designed to wash and fill 96-well and 384-well microplates (including deep well formats) for biochemical and immunological assays. It’s engineered for reliable, repeatable performance with high precision and adaptability for a range of workflows

Year of construction: 2016, condition: excellent (used), Gold standard microplate washer, BioTek 405 TS Gjdpfx Asivpckjikobw Many other laboratory equipment and supplies available upon request.

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Wash 96-well plates reliably with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer is equipped with a graphical user interface, various language versions, and a USB port for optimal user-friendliness and excellent convenience. Features: Large, clear color display and keypad ensure user-friendliness The user interface is logically and intuitively designed, allowing for quick protocol programming User-friendly software requires minimal training and ensures a quick start Pressure-free bottles are safe to use Liquid level sensors in the wash and waste bottles ensure safe operation Automatic pre-rinse function guarantees reliable performance Aerosol cover prevents the escape of aerosols containing infectious material Gbsdetzb D Djpfx Aikew Plate sensor detects whether a plate is present or not Wellwash is used to effectively remove excess liquid from wells Low residual volumes ensure optimal washing performance and reliable assay results More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Thermo Scientific Multiskan FC Microplate Photometer 357 with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays The Multiskan FC covers a wavelength range of 340 to 850 nm, enabling many different applications, starting from enzyme kinetic studies to Lowry assays. The device performs fast and accurate measurements. For example, a complete measurement of a 96-well plate is possible in less than seven seconds. The device is equipped with a linear shaker as standard. A model with an incubator reaches incubation temperatures of up to 50 °C and is capable of reading 384-well microplates. The SkanIt software supports the optimal use of the device through a visual workflow, effortless data analysis, and export functions. Gbjdpfx Aijtt R Syeksw Features In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software The SkanIt software can be used to control the Multiskan FC and supports the optimal use of the device functions with a visual workflow, simple data analysis, and export functions. Wide Wavelength Range A wavelength range of 340 to 850 nm for a variety of applications such as ELISA immunoassays, protein quantification, endotoxin, cytotoxicity and proliferation assays, enzyme assays and growth curves. Pre-installed Filters Equipped with a filter wheel with eight positions and three standard filters, 405, 450 and 620 nm. Additional filters are easy to install and can be ordered. Proven Performance and Reliable Results Integrated self-diagnosis functions, IQ/OQ and verification aids make this device reliable and trustworthy. Specifications Compatibility: Robotic Detector Type: Photodetector Incubator Temperature: Room temperature +4 °C to 50 °C Interface: User: Integrated or via PC Light Source: Quartz glass halogen lamp Measurement Speed: 7 s for 96-well plate (fast mode), 13 s for 96-well plate (normal mode) Measurement Technique: Absorption Plate Type: 96-well plate, 384-well plate Product Line: Multiskan™ Shaking: Linear Software Type: SkanIt Software Wavelength Selection: Filter Accuracy: ± 1% (0 to 3 Abs) or ± 0.003 Abs. The larger value at 405 nm applies. Depth (US): 15.7 in. Depth (metric): 40 cm Filter: Filter wheel with eight slots; installed filters: 405 nm, 450 nm and 620 nm Height (US): 8.7 inches Height (metric): 22 cm Hertz: 50/60 Hz Linearity: 96-well plate: 0 to 3 Abs, ±2% at 405 nm 384-well plate: 0 to 2.5 Abs ±2% at 405 nm Precision: CV ≤ 0.2% (0.3 to 3 Abs) at 405 nm Resolution: 0.001 Abs Voltage: 100/240 V Wavelength Range: 340 to 850 nm Width (US): 11.4 inches Width (metric): 29 cm Unit Size: Each More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch Gedpfx Aeymcmfsikjbw · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: excellent (used), Year of construction: 2013, WITTMANN BATTENFELD MACRO POWER E450/2250 INJECTION MOLDING MACHINE Manufacturer: Wittmann Battenfeld GmbH, Austria Model: MacroPower E450/2250 Year of Manufacture: 2013 Control System: UNILOG B6 Type: Hybrid, horizontal injection molding machine Machine Number: 134481-100 Operating Hours: 76,623.41 h 1. CLAMPING UNIT Clamping Force: 4500 kN / 450 tons Tie Bar Spacing (H × V): 950 × 700 mm Minimum Mold Height: 330 mm Maximum Mold Height: 780 mm Electric Ejector System Ejector Force: 60 kN Ejector Stroke: 180 mm 2. INJECTION UNIT Screw Diameter: 65 mm Maximum Injection Weight: 980.9 g Maximum Injection Pressure: 2070 bar Maximum Injection Speed: 400 mm/s Servo-electric Drive for the Injection Unit Knödler Drive Screw with Check Valve 3. DRIVE AND CONTROL Gedpfx Aj Ah Hkheikjbw Hybrid Drive UNILOG B6 Control System Servo S0 Package ServoPower S1 Package – hydraulic pump speed control Integrated Filtration System Control System in Polish Operating Hour Counter: 76,623.41 h 4. ADDITIONAL EQUIPMENT Compressed Air Valve Cooling Water Flow Regulator Digital Interface for Controlling up to Six Thermoregulators Interface for Controlling Valve Pins in the Mold Interface for External Hot Runner Controller Integration with Wittmann W8xx Series Robots Quality Control Button Electric Ejector Integrated Hydraulic Filtration System

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm Gbedpfxoztc Dis Aiksw • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Condition: used, machine/vehicle number: LC610, Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actuation and controlDischarge control: electronic management on crusher/pump groupManufacturer: Vitone engineeringAdvanced Automation & Control SystemsThe line leverages pneumatic actuation for reliable, low-maintenance operation and features electronic discharge management on the crusher and gear pump group for precise process control. Variable speed on the crusher enables optimal paste preparation across different olive varieties and crop conditions. Modular sections facilitate line balancing and fine adjustments during peak harvest periods.Electronic discharge management for consistent flowVariable-speed crushing for paste optimizationPneumatic controls for actuators and key mechanismsModular sections to match upstream reception and downstream filtrationProduction Line Integration CapabilitiesDesigned for seamless integration within an olive oil extraction plant, the system connects upstream fruit handling with malaxing, separation, and finishing. Downstream, it interfaces effectively with used bottling line equipment and industrial packaging solutions for edible oil, enabling a smooth transition from extraction to filling, capping, and labeling where required.Inline operation across crushing, malaxing, centrifugation, and filtrationEasy tie-in to downstream oil bottling and labeling systemsCapacity scalable by upgrading pump sectionsSorter with belts and hoppers supports steady, uniform feedMachine Condition & Maintenance HistoryThe plant is kept in regular working order with scheduled annual maintenance. It operates every harvest season, ensuring components remain exercised and service-ready. The consistent upkeep reflects a practical, second hand asset that remains fully functional and dependable for ongoing production.Operational status: in production during harvest seasonsMaintenance: routine annual service performedCondition: ready to support continuous-cycle extractionOperational Performance & Versatility Gbodpe Adt D Ejfx Aiksw

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Godpjy N Tbmjfx Aikjbw Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: good (used), Year of construction: 1992, For sale is a fully functional, robust agricultural drying line that was recently used successfully for the efficient drying of sawdust. The system is ideally suited for sawmills, pellet and biomass producers, or agricultural service providers. Versatile application: Optimized for sawdust and wood flour, also suitable for straw, grain legumes, or specialty crops. Reliable technology: Solid machine construction quality, designed for continuous operation and high throughput. Energy-efficient: Well-designed airflow for optimized heat consumption. Condition & availability: The system is in well-maintained, operational condition and can be inspected while powered on after prior arrangement. Gbodpfxoz I Efpo Aikew

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Gbedpfozurz Hex Aikow Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: new, functionality: fully functional, KINGWAY GB Series – Professional Tracked Dumpers for Demanding Applications The KINGWAY GB800 and KINGWAY GB500 tracked dumpers are designed to ensure efficient transport of heavy materials under a wide range of operating conditions. Whether on construction sites, in agriculture, or in landscaping and horticulture, both models impress with their robust build quality, high performance, and thoughtful, ergonomic design. The durable rubber tracks and powerful drive systems provide stable movement even on soft, uneven, or steeply sloped terrain. Thanks to their compact dimensions and the ability to turn almost on the spot, these machines are ideal for confined spaces such as narrow properties, gardens, or congested construction sites. Both dumpers feature a sturdy skip with removable drop sides, facilitating easy loading and unloading of materials such as soil, demolition debris, timber, or paving stones. The mechanical transmissions allow the operator to optimally adjust speed according to the terrain and job requirements, while the rugged steel construction ensures high durability and longevity. TECHNICAL DATA – KINGWAY GB500 - RED Model: DR-MD-03A Engine: Petrol Engine power: 7 hp Transmission: 3 forward gears + 1 reverse gear Payload: 500 kg Skip length: 900 mm Skip width: 670 mm Skip height: 290 mm Track width: 180 mm Sound power level (LWA): 103 dB(A) Operating weight: 178 kg Fields of Application: • Construction: Transport of sand, rubble, mortar, and paving stones • Agriculture: Transport of feed, fertilizer, and crops • Landscaping: Removal of soil, grass, branches, bark, and stones • Fencing: Transport of concrete, soil, and assembly materials • Building materials trade: Loading and unloading of bulk materials Key Advantages: • Powerful engine and robust tracks for challenging terrain • Compact dimensions and excellent maneuverability • Skip with foldable and removable drop sides • Sturdy steel construction for intensive use • Simple, intuitive operation and high productivity PRICE: €1,600 net €1,904 gross TECHNICAL DATA – KINGWAY GB800 - GREY Model: TD800A Engine: Petrol Engine power: 15 hp Transmission: 6 forward gears + 2 reverse gears Payload: 800 kg Skip length: 1,320 mm Skip width: 830 mm Skip height: 320 mm Track width: 180 mm Sound power level (LWA): 103 dB(A) Operating weight: 378 kg Fields of Application: • Construction: Transport of sand, rubble, mortar, and paving stones • Agriculture: Transport of feed, fertilizer, and crops • Landscaping: Removal of soil, grass, branches, bark, and stones • Fencing: Transport of concrete, soil, and assembly materials • Building materials trade: Loading and unloading of bulk materials Key Advantages: Gbjdpeyk Sl Ejfx Aikjw • High-performance engine and robust tracks for tough terrain • Compact dimensions and high maneuverability • Skip PRICE: €4,100 net €4,879 gross

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Gbodpfszzkwmjx Aikew Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg