Used Cpu for sale (241)

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 Dsdpeuuu Ezjfx Ahuecp -Dimensions: 320/165/H70 mm -Weight: 2.7 kg

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Dcedpfx Ahsxhgfgjujp Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 T - Maximum working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width / clear height: 1500 mm - Distance between columns: 2050 mm - Maximum lateral cylinder displacement: 1450 mm - Maximum longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil is not included in the delivery scope - Hydraulic power packs are mounted on top of the press - Hydraulic manifold and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Hydraulic cooling by air and water cooler - Stroke cylinders integrated into the working table Rod diameter: 25 mm - Stroke: 80 mm - Control via cylinder control system or hydraulic power unit with manual lever control - 10 stroke cylinders installed - Digital control with stroke measurement via encoder and pressure measurement with digital readout - Siemens KTP 900 – 9" touchscreen for programming (up to 99 programs): - Maximum up and down stroke of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure setting - Piece counter - Pre-stop up/down stroke with accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time operating parameter monitoring - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power pack with solenoid valves (replaces pendant control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - PLC system by SIEMENS (S7-1200 series) - Siemens LCD touchscreen (9") MTP900 fitted in the control cabinet - Electrical components from SIEMENS, ALLEN BRADLEY and PHOENIX - System pressure of the pressure cylinder adjustable via LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes storable; all aforementioned values can be programmed per recipe - Activation via wireless remote - Dual button for slow/fast up and down movement, emergency stop, and movement confirmation Djdoxrb Nbspfx Ahuocp - Touch-sensitive safety strip mounted at the bottom of portal columns for safety - Control cabinet mounted to bridge sidewall - Anti-rotation device for the cylinder - Oil temperature displayed on LCD touchscreen - Overheat warning for hydraulic oil displayed on LCD touchscreen - Filter contamination status displayed on LCD screen - System faults displayed on LCD touchscreen - Pressing status information displayed on LCD display - Once oil temperature reaches 45°C, the air cooler begins operating to cool the oil. If 65°C is reached, the machine stops operation until it cools back to operating temperature. - Operating manual included - System complies with all essential safety and health requirements according to CE regulations.

Condition: ready for operation (used), Siemens Simatic 6ES5928-3UA11 central processing unit (CPU) for AG 135U E, version 9, used, 100% functional Dcedpjxahr Eofx Ahuep

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device Dedpfsxn A Spsx Ahujcp • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Dcjdpfx Ahexnlf Eeuep

Condition: good (used), PLC control, central module, RAM, CPU, central device, positioning module Dedpfx Ahjwc Nnceuocp -Manufacturer: Siemens, SIMATIC S7-400 Positioning Module FM 451 -Type: 6ES7 451-3AL00-0AE0 -Quantity: 1 piece available -Dimensions: 215/50/H290 mm -Weight: 1.4 kg

Condition: excellent (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Dcsdpjwnfmfefx Ahujp Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.

Condition: good (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex C544 Year of manufacture: 2003 Manufacturer: Mitutoyo Measuring range: 500 x 400 x 400 mm Controller: UC-200 Operating manual: Available Hardware and software features: Computer/CPU: Demo / New device Monitor: Demo device Printer: Demo device Software: MCOSMOS-1 V4.1 Accessories: Probe head mount: Renishaw PH6M Probe: Renishaw TP200 Additional accessories: Ceramic calibration sphere, Renishaw change rack 1 x SCR-200 Djdpfx Ahoxqn Arjuocp We are happy to personally advise you as specialists to find the right machine for your measuring requirements. Worldwide shipping available on request!

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control Dcedpfjxf Up Uex Ahuep - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: ready for operation (used), SONPLAS SPS_CPU v1_20, used, good condition, 100% functional, scope of delivery as per photos Dodsxah H Nspfx Ahujcp

Condition: new, Year of construction: 2023, Unused, still in packaging SIMATIC S7-1500TF, CPU 1517TF-3 PN/DP, Central processing unit with work memory 3 MB for program and 8 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface, Ethernet, 3rd interface, PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required Dedjv Aannjpfx Ahuscp We have 7 pieces in stock

Condition: good (used), PLC control, central module, RAM, CPU, central unit, central device -Manufacturer: Siemens, SIMATIC S7-400, CPU 414-2 RAM -Type: 6ES7 414-2XG03-0AB0 -CPU: CPU 412-1 -Dimensions: 215/25/H290 mm Dcedpfxewc Nt Eo Ahujp -Weight: 1.0 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total width: 700 mm, pressing force: 16 t, working height: 1,050 mm, center height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Dcodpfx Ahexldiqouop Currently, the machine is equipped with 1 straightening station; expansion is possible.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly checked, tested, and is guaranteed to be ready for operation – quality you can trust. Machine Data Type: CNC Crysta Apex C776 Manufacturer: Mitutoyo Year of Construction: 2005 Measuring Range: 700 x 700 x 600 mm Controller: UC-200 Hardware & Software CPU: New Monitor: New Software: Machine is delivered without software; the price includes a full upgrade to MCOSMOS-1 V5 Accessories Renishaw PH-10M Renishaw TP200 Renishaw SCR200 Bilz vibration damping system A rotary table (MRT) is also available on request (not included in the current price). As a specialist, we are happy to provide you with individual consulting to help you find the ideal machine for your measurement tasks. Worldwide delivery available on request! We can also offer you calibration or maintenance services upon request. We are happy to provide personalized consulting regarding CMMs. If you are interested in selling your machine, feel free to contact us. Leasing and hire purchase options are available upon agreement. Dedpfx Asxqnywohujcp We will find the right machine for you!

Condition: used, Year of construction: 2011, Flash pasteurizing system with buffer tank Additional title: Pasteurization with buffer tank Capacity: 220 hl/h Dcedoxbn Hlepfx Ahujp Temperature heating zone: 92 °C Pasteur units: 50 PE Heating time: 42 Sek. Power: 7,5 kW Current: 63 Ampere Voltage: 3 x 400/230 Volt Frequency: 50 Hz Length: 3900 mm Width: 3000 mm Height: 3000 mm Operation / Control: Siemens S7-300 with CPU 315-2DP, Multi Panel MP 277 Key with 10“ Color TFT- Display Material: stainless steel Base construction: Base frame for holding control cabinet and components Features: Plate heat exchanger, buffer tank 80 hl, 3 bar, accessories for PWT and PT, hot water circuit fittings, pumps, measurement and control technology, connection panel, control, control cabinet

Condition: ready for operation (used), SONPLAS SPS_CPU V1_30 control card, used, good condition, 100% functional, scope of delivery as per photos Dcodpjxah Iaofx Ahusp

Condition: good (used), functionality: fully functional, For sale: ROWE RCS 4000 Plotter DIN A0 up to 914 mm 2011 Year of Manufacture: Description: ROWE Model RCS 4000 large format plotter/scanner/copier. Specifications: Manufacturer: ROWE Dcjdswlhypjpfx Ahujp Model: RCS 4000 Device Type: MFP Functions: Print/Scan/Copy * Printer: Printing Technology: guided Type of Printing Technology: Laser/LED Colour Scale: Monochrome Maximum Format: A0 Number of Colours: 1 Maximum X Resolution (Monochrome): 600 dpi Maximum Y Resolution (Monochrome): 600 dpi * Scanner: Scanner Type: contact Scanner Sensor Type: CIS Maximum Original Size: A0 Maximum Scan Width (X): 914 mm Scan Resolution (X): 600 dpi Scan Resolution (Y): 600 dpi Enhanced Scan Resolution (X): 1200 dpi Enhanced Scan Resolution (Y): 1200 dpi Image Sending via Email: Yes * Copier: Minimum Scaling: 25 % Maximum Scaling: 1000 % Zoom Steps: 1 Maximum Number of Copies per Cycle: 999 * Interfaces: Ethernet Interface (RJ-45): Yes Web Interface: Yes * System Requirements: Windows Support: Yes Linux Support: Yes * Memory/Processor: RAM: 1024 MB Hard Drive Capacity: 80 GB CPU Frequency: 3000 MHz * Logistics: Weight: 284 kg Dimensions: 1375x1175x750 mm * Rolls: 2 automatic rolls Overall: L=690 mm W=1370 mm H=1100 mm (X315) Condition: Used, good condition considering age. * Last Service: At 22,000 meters. Service Interval: Approx. every 10,000 meters. Current Counter: 25,000 meters. (no service yet required) Operational, under power. * IMPORTANT: For logistical reasons, we only sell within Europe. Buyer is responsible for removal, loading, and transportation. * "The seller excludes any warranty for the goods sold. The item is sold as is, without guarantee as to its suitability for a particular purpose or its freedom from defects. The buyer confirms that they have inspected the item prior to purchase and are satisfied with its condition. The seller assumes no liability for damages resulting from the use of the item. Any claims by the buyer against the seller are excluded." * Status: 09.09.2025 * Price: €950 negotiable, plus VAT Prices are net plus VAT * If you have any questions or need further information, feel free to contact me. *

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10Dimensions: 375/70/H265 mm Dcedsxn N Anepfx Ahuop -Weight: 3.9 kg.

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: Dedpfx Ahjflrtxeuecp 1 pc 0.651.406-19.3 UNI Universal Interface 1 pc 0.650.847-56.1 O32 Output Card 2 pcs 0.651.708-57.3 I32 Input Card 1 pc 0.652.138-36.1 APC 1 pc 0.651.928-25.3 LAB Axis Controller 1 pc 0.651.400-22.3 1 pc 0.860.204-59.1 B32 1 pc 0.652.128-35.0 RE4 1 pc 0.651.269-26.0 ITY Serial Interface 1 pc 0.651.974-23.2 ABS Termination Board 1 pc 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the largest specialist with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General Machine Data: Machine Type: Crysta Apex C7106 Year of Manufacture: Mid 2004 Manufacturer: Mitutoyo Measuring Range: 700 x 1000 x 600 mm Control Unit: UC-200H Operating Manual: Available Hardware and Software Equipment: PC/CPU: Demonstration/New device Monitor: Demonstration device Printer: Demonstration device Software: Delivered without software; full upgrade to MCOSMOS-1 V5 included in the price Accessories: Probe Head Mount: Renishaw PH10MQ Probe Head: Renishaw TP200 Dedpfx Ajxqnr Hshuecp Additional Accessories: Ceramic calibration sphere, Renishaw rack 1 x SCR-200 We are happy to provide individual consultation as specialists to help you find the right machine for your measuring tasks. Worldwide delivery available on request! Upon request, we can also offer calibration or maintenance services. We are happy to advise you on all aspects regarding coordinate measuring machines. If you are interested in selling your machine, do not hesitate to contact us. We can also offer the machine for lease or hire-purchase by arrangement. We will find your machine!

Condition: ready for operation (used), SONPLAS SPS_CPU V1_30 control card, used, good condition, 100% functional, scope of delivery as per photos Dcedpfxjxah Igo Ahuep

Condition: excellent (used), PLC control, central module, RAM, CPU, central unit, central device Dsdpfohy T Iqex Ahuscp -Manufacturer: Siemens, Simatic S7 Ovp -Type: Simatic S7 6ES7 414-1XF03-0AB0 -CPU: CPU 412-1 -Carton dimensions: 310/230/H35 mm -Weight: 1.0 kg

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact unit Simodrive Dcsdpfxsmrw U As Ahujp -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-OAAO -Quantity: 1 piece available -Dimensions: 270/170/H290 mm -Weight: 7.3 kg

Condition: good (used), PLC control, central module, RAM, CPU, central device -Manufacturer: Siemens, Central Controller Simatic S5-100U CPU 102 -Type: 6ES5 102-8MA02 Dcedpfowpgv Dex Ahuep -Memory module: 1x 6ES5 275-OLA15 / 1x without photo type designation -Quantity: 2x assembly available -Price: per piece -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/piece