Used Copy Router for sale (832)

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Nwjdpjxvaw Sofx Aarjk

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Nwsdpjzuzfusfx Aarek Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Door panel production line Nsdpfxozuzh As Aarowk Note: The system started its series production in 2023; at this point, all machines were synchronized and overhauled as needed. Used door panel production line consisting of: Double-end profiler Manufacturer: Kraft Technical data - 2 scissor lift tables - 2 vacuum grippers - Infeed roller conveyor with belt conveyor - New Siemens touch control 13 roller conveyor elements Manufacturer: Kraft Technical data - Driven, approx. 3000 mm each Continuous insert material supply Special insert line HPL - Portal feeding system Manufacturer: Kraft Year of manufacture: 2023 Technical data - For singulating, aligning, and placing HPL Glue application machine Manufacturer: Bürkle Year of manufacture: 1990 Glue application machine Manufacturer: Kuper Year of manufacture: 2018 Lay-down table Technical data - Pneumatic fixing (centered on the center axis) - Device for automatic laying of battens - Fixed stop in the direction of travel, to the left of the timing belt conveyor - Positioning of the battens against the end stop for transfer with the suction system - Servo-motor driven and movable on the Y and Z axes - Uptake of the battens via a suction bar - Vacuum generation via ejector Stapling station Technical data - Servo-motor driven width adjustment of the stapling units, centered on the center axis - from min. 430 mm - max. 1,300 mm - 4 support brackets for holding the stapling components and guide units - 4 pneumatic guide units for holding the stapling units - and for the feed movement / pressure pad on the Z-axis - 4 feed slides with pneumatic pressure to fix the battens during stapling - 4 stapling units, manufacturer BEA - 2 pneumatic end stops Scoring saw Technical data - 2 units: Saw units at the top (right/left) - For creating ventilation slots - Mounted on a linear axis system for centering on the cutting width manually - Pneumatic feed of the saw units, sensing the center of the upper edge - Continuous multi-daylight press Manufacturer: Bürkle Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 platens with a press area of 1400 x 2800 mm - With automatic feeder, manufacturer Bürkle - Removal device, manufacturer Bürkle Trimming station Technical data - For trimming overhanging edges on the top and bottom of the doors Buffer system Technical data - For intermediate buffering of semi-finished door panels - Total length approx. 14,000 mm - Solid steel construction - Approx. 200 individual compartments Label printer Technical data - Automatic label printer for labeling in-line Storage and transport system Manufacturer: Kraft Technical data - Driven storage and transport roller conveyor - Roller width 1000 mm - Total length approx. 120 meters Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Njdpfxjzuzkkj Aarjwk Manufacturer: SCM/Superfici Painting line consisting of: Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 2x UV drying units Manufacturer: Superfici Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Nwjdozuzwqepfx Aarok Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Nwjdpfx Aozuz Euoarek Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Maximum operating temperature 180 degrees Celsius Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Year of construction: 1997, condition: used, Baling press Manufacturer: HSM Nsdpfx Aaszuz Dworowk Type: HSM 75 VL Year of manufacture: 1997 Technical data: - 2.2 kW motor - 9 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Extraction system Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) Nodezu Ah Rspfx Aarowk - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² - Rotary valve: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Nwjdjzu Al Aopfx Aarok

Condition: used, Year of construction: 1991, Strip cutting system Nwodszuy Nrepfx Aarjk Strip cutting system consisting of: Alphamatic vacuum loading system with 4 roller conveyors Feed system to the crosscut saw Crosscut saw with vacuum workpiece clamping Further transport to the ripsaw Ripsaw Manufacturer: Holzma Type: HPP81-3200 Year of manufacture: 1991 Technical data - Modified in 2019 Extraction conveyor belt Longitudinal roller conveyor with longitudinal measuring system Automatic labeling system REA JET Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2013, condition: used, Membrane press table Manufacturer: Columbus Type: Vacuum forming Njdpfxozuz Eho Aarswk Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 - Must be connected to an external vacuum pump Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm Nwedjb Tmngopfx Aarsk X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom Nwodpfxsb Uht No Aarjk -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel Njdpfowm Nu Dsx Aarswk

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table Nwsdpfx Ajwdny Tearok (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: good (used), Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Technical data: Glue application on the panel Panel height 10/50 mm Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Nwodpfxsypm Tuo Aarjk Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Nwedpfx Aew I U Drsarek Location: Hochheim

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Table size 1000 x 750 mm Spindle clamping length: 140 mm Nodszk N Rdspfx Aarowk Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Weight 520 kg Availability: at short notice Storage location: Röllbach

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Nwedpfsyyya Djx Aarsk Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: used, mileage: 173,921 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,450 mm, first registration: 10/2021, loading space length: 3,120 mm, loading space height: 1,660 mm, loading space volume: 10 m³, fuel tank capacity: 90 l, CO₂ emissions: 228 g/km, color: white, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, = Additional Options and Accessories = - Sliding door on the right side - Alarm system - Alarm system, Class I - Heated exterior mirrors - Electric windows, front - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Hill-hold control - Wooden cargo bed - Multifunctional steering wheel - Multimedia compatible - Emergency braking assist - Rear parking sensors - Radio - Service booklet available (physical copy) - Engine immobilizer - Phone with Bluetooth - Connected services - Adjustable steering wheel - Partition = Additional Information = General Information Number of doors: 5 Model range: 2014 - 2024 Technical Information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 2,179 cc Transmission: 6 gears, manual transmission Maximum speed: 160 km/h Dimensions Length/Height: L2H1 Dimensions (L x W): 541 x 205 cm Weights Unladen weight: 1,905 kg Payload: 1,095 kg GVW: 3,000 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Nodozbbcnopfx Aarjwk Interior Interior: black Environment and Consumption Average fuel consumption (WLTP): 8.6 l/100km CO₂ emissions (WLTP): 228 g/km Emissions class: Euro 6d-TEMP Maintenance, History and Condition Booklets: Available APK (Technical Inspection): Valid until 12/2026 Number of keys: 2 (1 remote control) Product Safety EU responsible: Stellantis Nederland B.V. Lemelerbergweg 12 1101AJ Amsterdam, NL customercare.

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Nodpfehqadcox Aarswk Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Nwsdpfx Asy Tk R Hsarek Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, input voltage: 240 V, HP Large-Format Inkjet 4-Color Multifunction Plotter Printer Nedpoyipt Djfx Aarjwk Type F9A30A Print/Scan/Copy Touchscreen Print sizes A1, A2, A3, A4 Print speed A1 format: 25 sec./page or 81 prints/hour

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details. • Suitable materials: wood, PVC, plexiglass, polycarbonate, polymers, high-density polyurethane (model making), soft metals • Applications: fast interpolations ideal for 3D machining, cutting, shaping • Feed rate (interpolated): 10 m/min • Tool changer: 12 positions, ISO20 • Electrospindle speed: 2000–18,000 rpm • Controls: handwheel for precise positioning; handwheel for feed rate adjustment during machining • Coolant: prepared for mist cooling system (unit not included) • Certification/year: CE, 2015 • Power supply: 400 V, 3-phase + neutral • Power consumption: 3.5 kW • Compressed air requirement: minimum 6 bar Nwjdpfx Aaezug Egsrsk Additional equipment • Tool length preset probe • Chip collection tray/conveyor under the table with extraction outlet

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min Nwedpfx Aezug Hwoarjk • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood