Used Cooling Machine for sale (69,051)

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Control: Siemens 840 Dsl -Operate Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Tool capacity: 24 Table size: 1.400 x 560 mm Max. Table Load: 1.000 kg Ijdpfx Aajzrm H Setoif Equipment Chip conveyor Cooling pumps Internal cooling: 17 Prod. Pack 1 bar

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Iodexiv Ugjpfx Aatsif Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Iisdpfx Aszb H Tfsatsf Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: excellent (used), Riedel Type: PC 251.1L4WE.I Riedel Process Chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. Operation requires an external cooling water circuit (e.g. dry cooler, cooling tower, or building's chilled water system). Additional information: Ideal for machine cooling, process cooling, industrial applications Technical data: Iiodjzix Naspfx Aatef Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Setpoint tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Nominal flow rate: approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Power supply: 3 × 400 V Frequency: 50 Hz Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Condition: used Scope of delivery: (see photo) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Iiodpfx Aaozl S T Rotef Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT Iiedpjzqbdijfx Aatsf TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. Iijdpfx Aezu At Tsatsf It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate.

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 Connect machining center - used - Year of manufacture: 2022 Integrated vacuum pump Continuous processing 4-sided edge profiling possible Automatic vacuum cup positioning Hardened, dust-protected prism guides Ball screw spindles on all axes Network card for remote maintenance Integrated control cabinet Control cabinet cooling with heat exchanger Handheld control unit Pick-up tool changer Changer for angle head Central lubrication, automatic Sensor for panel measurement Barcode scanner CLAMEX tools Angle gear for CLAMEX Additional infeed table ----- Technical data ----- Machining length (edge profiling - radius) X: 3,200 mm Machining length (edge profiling - radius) Y: 985 mm Min. workpiece length X: 200 mm Min. workpiece length Y: 70 mm Min. workpiece thickness: 8 mm Max. workpiece length X: 3,200 mm (longer with extension) Max. workpiece length Y: 1,200 mm (max. passage width) Max. workpiece thickness: 70 mm Main spindle motor power: 10.3 kW (S6) Main spindle speed: 1,000 - 24,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drilling spindle mount: M10, interference fit 11 mm Number of vertical drilling spindles: 13 pcs Number of horizontal double drilling spindles in X-direction: 2 pcs Number of horizontal double drilling spindles in Y-direction: 1 pc Saw blade Ø of saw unit: x 20 x 5 mm Number of tools in the changer: 6 + 1 pcs Dust extraction port Ø: mm Compressed air connection: 6-8 bar Compressed air requirement: 200 NL/min Quality information: Iisdpfxjzr Inqo Aatof - Complete basic cleaning - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Iodozfaaxopfx Aatoif

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Ijdszfaaropfx Aatoif

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Iijdpfezhw Ryox Aatsf

Condition: new, Year of construction: 2022, functionality: fully functional, Extruder for protein, TVP, and high-moisture analogues. 110 kW. This equipment has never been used and is complete. Pre-conditioner Extruder Polycool 500 and one Polycool 1000 Iijdszh I Dqspfx Aatef 6 cooling and heating regulators, Thermoplas. Dosing system, Bühler (loose weight) for protein Stainless steel control panel Venting system for the extruder Dosing system for liquids (Netsch)

Condition: good (used), Year of construction: 2007, ASSCON Systemtechnik VP1000-56 * PCB size: 500 × 600 mm * Maximum component height: 50 mm * Machine weight: 400 kg * Supply voltage: 400 V / 50 Hz (3/N/PE) * Connected power: 10 kW * Average power consumption: 3.5 kW * Standby power consumption: 1.9 kW * Compressed air supply: 5 bar, oil-free compressed air * Media consumption: approx. 2.5 m³/h * Galden® filling volume: 20–25 kg Iiodpfx Aaezqcmfotef * Heat-up time: approx. 25 min * Machine dimensions (L × W × H): 1,430 × 1,385 × 1,350 mm * Loading/unloading height: 920 ± 20 mm * Cooling: Air/convection, open or closed cooling water circuit possible

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Iodpezmt U Eofx Aatoif

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Iiedpfxsywicvj Aatsf

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Model: AS523S Ijdpfx Aasy T Nbdeteif Year: 2021

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Iijdpfewc A Rkex Aatjf

Condition: new, Year of construction: 2025, functionality: fully functional, The LMH-3000 is a state-of-the-art, next-generation 4-in-1 fiber laser welding machine. It combines welding, cutting, brazing, and surface processing in a single system. Building on the proven LMH-1500, the LMH-3000 offers even greater performance and flexibility with its 3,000 W laser source – ideal for working with thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling, and ergonomic handheld operation, this machine is perfectly suited for continuous industrial 24/7 use. Technical Data Model: LMH-3000 (4-in-1) Laser source: 3,000 W (Raycus / MaxPhotonics – depending on configuration) Laser type: Fiber laser Functions: Welding, cutting, brazing, surface processing Operating mode: Continuous operation possible Cooling system: Integrated water cooling Iiedpoxc Ec Tjfx Aatsf Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheet metal, and more Energy efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic handheld torch with optional wire feeder Advantages - 4-in-1 functionality – versatile applications - Higher output (3,000 W) for maximum welding speed and material thickness - CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards - Clean weld seams with minimal reworking - Robust design for industrial use - Flexible use in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Testing: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Operating and application training can be arranged by appointment. Extras & Accessories - Wire feeder system - Shielding gas solutions - Replacement nozzles and wear parts - Extras & accessories (optional) Replacement nozzles and wear parts—Ideal for workshops, mechanical engineering, metalworking, body shops, or maintenance departments. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU guidelines. Delivery includes all required documentation. 📍 Manufacturer / Supplier: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Shipped by freight carrier (on pallets) within Germany and the EU – shipping costs on request. 🧾 Invoice issued with VAT shown separately. ✅ Buy now and have it delivered ready for immediate use!

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Iiedpsy Hvqlsfx Aatjf

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION Iodpfxeyynlzs Aatjif WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Isdpfxezkftbe Aatsif Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Iedpfx Aaezmafqeteif

Condition: good (used), EOS Iijdjzimhqepfx Aatjf Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & operating terminal Exchange frame with build platform Multibox is a typical accessory for powder handling in EOS systems, enabling transport and interim storage of materials. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Operating terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data: Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: air-cooled Pump: high-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: water or water-glycol Connection: NPT version ("AN") Power supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) If you have further questions, we would be pleased to answer them by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen Isdpfxezrxdvo Aatoif • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Isdpfjyrf I Asx Aatjif Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.