Used Coolant Purification System for sale (35,952)

Condition: new, Year of construction: 2025, 99% filtration efficiency – removes smoke, vapors, and fine metal dust. Automatic filter cleaning – the impulse system maintains full performance without requiring frequent maintenance. High extraction capacity – up to 3000 m³/h – effectively eliminates contaminants without compromising visibility of the work area. Quiet operation (≤78 dB) – enables comfortable use in confined spaces. Integrated work table – ergonomic work surface with lower and rear extraction. Kjdpfx Asyi Utvsmpelr Sturdy steel construction – resistant to vibration and intensive use. Mobile – equipped with locking transport wheels, easy to move. Safe operation – protection against overheating and particle ignition. Power supply: 380 V / 50 Hz Motor power: 3.0 kW Air flow: 2500–3000 m³/h Operating pressure: 2600–3050 Pa Filtration efficiency: 99% Filters: 2 × polyester cartridges Filter cleaning: Pneumatic, pulse (backflush) Dust container capacity: 50 l Noise level: ≤78 dB(A) Device dimensions: 1500 × 1200 × 1600 mm Table work surface: 1500 × 700 × 750 mm Weight: approx. 200 kg

Condition: new, Year of construction: 2026, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Ksdpfx Aoxdbzbjmpslr Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Kjdpsxdbxyefx Ampslr Weight 1600 kg

Condition: new, Year of construction: 2026, The machine is designed for sharpening planer knives mounted in a package. The device is characterized by a rigid and compact construction with a built-in cooling system Model: ON1700AM Max. working width: 1700 mm Table with magnetic mount: 200x1700 mm Grinding angle: +/- 90° Automatic workflow in the X axis Semi-automatic Z axis feed Kodpfx Amjtvmxtopjlr Grinding disc speed: 1400 rpm Grinding disc: Ø 200 x 100 x 100 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 5.5 kW/400V Feed motor power: 0.75kW Coolant pump power: 90W Cooling device protecting against knife overheating: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Dimensions: 3150x105x1165 mm Weight: 1540 kg

Condition: new, Year of construction: 2026, The machine is designed for sharpening planer knives mounted in a package. The sharpener is characterized by a rigid and compact structure with a built-in cooling system Automatic grinder for sharpening planer knives ON1500PLC by VIBER-SYSTEM The machine is designed for sharpening planer knives. The device is characterized by a rigid and compact structure with a built-in cooling system. The machine is mainly used for grinding various right angles of cutting tool blades, such as carpenter's planers, rotary knives, paint spatulas, paper knives, shredder knives, etc. It mainly consists of a machine body, a work table, a slide carriage, a grinding head, automatic feeding, electrical components and cooling - a total of 7 parts. All components have a reasonable and compact structure, and the appearance of the machine is aesthetic. Fully automatic sharpening with X and Y axis feed. High Efficiency: The ON1000PLC sharpener is an efficient device that allows for quick and effective sharpening of planer knives, contributing to increased work efficiency in the plant. Large Dimensions: With a larger version of the model with an impressive weight of 520 kg, the machine ensures stability and solidity of operation, which translates into precision and quality of processing. High Speed: Thanks to the ability to generate grinding disc revolutions of up to 1440 rpm, the sharpener guarantees quick and effective sharpening of planer knives without compromising on quality. Magnetic Mounting: Equipped with a stool with magnetic mounting, the machine ensures stability and safety during the sharpening process, eliminating the risk of knife displacement. Universal Application: The ON1000PLC sharpener is used both in small carpentry workshops and in large sawmills dealing with mass processing of wood and wooden materials. Model: ON1500PLC Max. working width: 1500 mm Table with magnetic mount: 140x1500 mm Grinding angle: +/- 90° Automatic workflow in the X axis Automatic and manual adjustment of the Z axis Grinding disc speed: 2800 rpm Grinding disc: Ø 150 x 68 x 32 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 2.2 kW/400V Feed motor power: 120W Ksdpfx Amotvm A Nspslr Coolant pump power: 90W Cooling device protecting against overheating of knives: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Dimensions: 2070x950x1450 mm Weight: 850 kg

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Kjdpfx Amexdciaepelr Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 Ksdsyc H N Njpfx Ampolr • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: good (used), axle configuration: 3 axles, first registration: 08/2016, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,540 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,210 mm, color: white, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Klsdpfx Aoyiyvpjmpjr Empty weight: 8.830 kg Carrying capacity: 33.170 kg GVW: 42.000 kg Functional Make of bodywork: VeDeCar Carrosserie Carrier Vector 1550 Cooling engine: diesel and electric (4432 operating hours diesel; 2039 electric) Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 09/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 14.070 kg Kljdsuc D Uaspfx Ampor Carrying capacity: 27.930 kg GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid Kledpfx Ameyxhhyopsr - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: used, functionality: fully functional, Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Overall length: approx. 2960 mm Overall width: approx. 1700 mm Overall height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Carton size: max. 440 L x 315 W x 450 mm H Internal article number: 2026032301 The conveyor system was in operation up until dismantling. Features: - Condition: fully functional, with signs of use - Ideal for rapid material handling - Professionally dismantled and packed - Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on design or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of professionals. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers. Kedpfx Amsywkbtjpolr

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Kedpfx Aoy Aagismpolr Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Klodpswufb Aefx Ampor Single phase 240Volt AC supply Ready to ship worldwide

Condition: good (used), axle configuration: 1 axle, first registration: 08/2020, loading space length: 10,000 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 10,550 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 6,300 mm, color: blue, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 1, dual tires, payload: 19,250 kg, curb weight: 5,750 kg, gross weight: 25,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, color: blue, ABS, EBS, axle type: BPW, tail lift, tail lift type: rear liftgate, tail lift capacity: 2,500 kg, tail lift manufacturer: Zepro, tail lift material: steel, tail lift dimensions: 250x200, System Trailers manufacture, Kelberg brand = Additional Information = General information Cab: Day Registration number: OV-25-YB Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Double tires; steered; tire tread left inner: 8 mm; tire tread left outer: 8 mm; tire tread right inner: 8 mm; tire tread right outer: 12 mm Weights Unladen weight: 5,750 kg Payload: 19,250 kg gross permitted weight: 25,000 kg Functional Tail lift: Zepro, rear liftgate, 2,500 kg Environment Emission class: Euro 0 Klodpfx Aev U T Rgjmpsr Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition Kjdev Sa Utopfx Ampjlr The machine will be technically inspected and cleaned upon order.

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m Kledpoym D Ahefx Amper SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Klodpfx Aswdibxsmpor Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: used, Year of construction: 2015, functionality: fully functional, total width: 2,700 mm, total length: 1,400 mm, total height: 2,100 mm, CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Wrapping machine, fully automatic. Modular configuration for integration with other machines and systems. Ergonomic balcony technology for quick format changeover. Operator panel for immediate diagnostics and precise control of every packaging stage. Built in 2015. PRODUCTION Ksdpfxjy Au Dco Ampelr - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm DIMENSIONS - Footprint: 2700 × 1400 × 2100 mm ENERGY CONSUMPTION - Operating voltage: 3x400 V; 50 Hz - Control voltage: 24 V - Rated current: 7.22 A

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for tretra pack fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environme... Klsdpfx Asyh E Apsmpsr

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Kodpfji Huzxox Ampelr Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Soco System Condition: Used Model/Type: Rollers Drive type: Gravity System consisting of: 7 segments (5 x 1.980 mm, 2 x 960 mm) total length: approx. 11.820 mm Total width: approx. 470 mm Conveyor width/roller width: approx. 410 mm Segment length: approx. 1,980 mm Roller diameter: approx. 50 mm/rollers made of plastic Axle distance: approx. 90 mm (adjustable) Material: steel/plastic Frame data: Height: approx. 100 mm width: approx. 25 mm Stock: 11,82 meters Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material will glide smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. Kledpei Dt Epsfx Amper

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Kjdpfsyvv Trox Ampelr Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: Ksdpfx Amoyy A Hgepolr * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: ready for operation (used), Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible. Kodpfoyt N Amjx Ampjlr

Condition: used, axle configuration: 3 axles, first registration: 08/2005, total length: 12,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,210 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Kedoyibq Eepfx Ampjlr Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 7,390 kg Payload: 31,610 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 130 cm Condition Damages: none Identification Registration number: OH-84-ZK