Used Construction Lift Machine for sale (113,575)

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new self-propelled pile driver for solar panels by Mazaka. The model has been designed in a compact housing – ideal for transport and intensive work. The brand is recognized by professionals on the EU, US, and Canadian markets. MAZAKA Self-Propelled Pile Driver MW1200 CW Engine Brand: YANMAR TIER 5, 35.4 kW, Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 dB Bodpfxsw Rvine Adxsww Hammer Model: MZKK65 1450 Joules Number of blows: 350–700 bpm Weight: 750 kg HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L Pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Travel speed: 2.2 – 4 km/h PANEL HEIGHT Max. panel height: 6100 mm Side shift 1 pile driver head template (other profiles available at extra charge, quoted upon request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2770 mm Width: 2290 mm Length: 3660 mm Weight: 4750 kg Column tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Net retail price with transport: €101,000 (net) Optional equipment (at extra charge): • Automatic levelling system – €4,100 (net) • Post puller – €2,000 (net) • Additional pile head template according to buyer’s technical drawing – €1,600 (net) • Rock, concrete, asphalt auger, including 203 mm bit and DTH 6'' mounting bracket (drilling depth approx. 1,650 mm in 5–10 minutes). Price: €16,000 (net). Please note: for rock drilling, a 14 bar / 14 m³ compressor is required. • Auger for soft ground (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete set – €4,500 (net)

Condition: ready for operation (used), Stichweh double scoop wheel Type DS 3011/09 Bl95 Year 2002 Drive 11 kW weight 21,400 kg Wheel diameter 3000mm Wheel width 1100mm and 900mm Trough length approx. 8m Capacity up to 80 t/h sand Water volume up to 250 m3/h Gearbox recently renewed; an overhauled replacement gearbox is included Replacement dewatering screen linings Good operational condition Bwodjrt R I Eepfx Adxjw

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, Equipment: onboard computer, Mobile cement silo for big bags/bagged goods/loose goods; capacity approx. 3m³; with screw conveyor; electronic weighing system and vibrator, powered by a Honda 5kW unit, electronic control panel, fall protection, transport lugs Bwodpfx Adjuldduoxow

Year of construction: 2007, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Bwodpfxsu U Hf Ee Adxew Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: excellent (used), Year of construction: 2021, For sale of equipment of a factory producing frame houses MBA production line - CNC frame nailing station - 2x multifunctional bridges, very rich equipment Bodjvdkubjpfx Adxjww - butterfly table - machining station - plumbing table 3x Riedex extraction Stromab CT600 13m saw with cutter 3x ID-Lifting vacuum hand lifter Additionally hand tools, 2x Forklifts Additional smaller items. All plant equipment is 2021 or younger production.

Condition: new, Year of construction: 2023, construction height: 22,000 mm, Explore Galen Group's range of high-quality long reach boom-arms, designed to enhance operational efficiency and safety in challenging construction environments. The machine details on the photo Machine Model: Komatsu PC450 Bwjdpsq E Iw Rsfx Adxew Total Length:22m Bucket Capacity: 1m^3 Usage Area: Port Construction For detailed information and inquiry, please contact us

Condition: new, Year of construction: 2024, Gyrustar bucket separators - Screen instead of disposing! For excavators and loaders from 1 - 30 tons. Bwodpfx Asv Hd A Rsdxjw Best screening result Screen instead of breaking! Gala construction Cable construction Screening bucket

Condition: ready for operation (used), Year of construction: 2016, MONTOLIT set: - Table Bwedevkyr Ajpfx Adxow - Electric milling machine aquaflex system (the set includes a new blade, covers) - The guide strip consists of 3 parts, after folding the length is 3600 mm, - Saw CP190C 1600 W, with a new blade fi 190 mm, - Knife for cutting tiles

Condition: like new (used), functionality: fully functional, overall weight: 510 kg, Year of construction: 2024, operating hours: 8 h, machine/vehicle number: DSM800S, For sale: Professional planetary grinder Schwamborn DSM 800S – one of the top models for concrete floor processing, ideal for large-scale applications and continuous operation. Technical specifications: Bwodpewr Dm Eefx Adxow • Model: Schwamborn DSM 800S • Working width: 800 mm • System: planetary, 3 heads • Voltage: 400 V • Operating hours: 8 • Year of manufacture: 2024 • Purchased as a demonstrator from the official distributor • Condition: excellent – virtually new • VAT invoice: yes • Location: Wrocław, Poland The machine is ready for immediate use – no additional investment required. It has only been used for demonstration purposes (not by us, but by a Schwamborn technician). On-site inspection and testing are possible. _____ Please feel free to contact me – I'll be happy to answer any questions and provide additional photos or a video of the machine in operation.

Condition: used, Year of construction: 2006, machine/vehicle number: 21741076, JCB loader frame, axles, hydraulics. Bodpov Immuofx Adxjww

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation Bedpfsw Hzkwex Adxoww • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: new, Screen Bucket for 20-25tons Excavators Bwodpfjw Dayrsx Adxjw Galen screen bucket is a versatile and efficient attachment designed specifically for infrastructure and construction projects. It allows on-site material sorting, reducing the need for additional transport and processing equipment

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. Bodpfx Aovlwqljdxjww 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. Bjdpew Hzfnefx Adxoww • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: new, Traverse Sleeper(Tie Layer) is a fundamental railway component that secures rails at the correct gauge, distributes loads evenly, and ensures track stability. Bjdpfsw Nrxiex Adxoww

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Bjdpew Hzfzsfx Adxsww Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter Bwsdjw Hza Sepfx Adxjw - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm plate thickness 6,0 mm Bodpfx Adjuiz Iwexjww Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Bedpfx Adsvq N Duoxeww

Condition: excellent (used), Year of construction: 2009, operating hours: 7,421 h, load capacity: 4,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Kubota, fork length: 1,150 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 2,850 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: diesel, Equipment: CE marking, adjustable boom, cabin, front guard, lighting, Combilift C4000 is in very good technical and visual condition Low mast//Total height 2850 mm Kubota engine We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world. Bwodpfx Adjxpn Rmjxsw

Condition: used, Year of construction: 2021, gebraucht 2021 3965 prompt, Zwischenverkauf v Taiwan 15600 € 1 12480 € 42 mm MK 4 280 - 1.100 mm 44 - 1.500 (12) U/min Stahl: M 25; Guss: M 38 1880 mm 870 mm 2210 mm 1800 kg 470 - 1.270 mm 0,05 - 0,15 (3) mm/min 2.2 kW 260 mm 280 mm 1.725 x 715 x 180 mm 0,75 kW Bodpfx Adow Np Nxjxjww 635 x 520 x 415 mm 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2015, Beading machine Bwsdpewrywgefx Adxow DS-Lifting - H-9000

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, We are in the process of selling a vareity of process equipment. Almost all the equipment were bought new in 2022/2023 and have been in use for less than three months in 2023. They have been stored inside a warehouse protected from outdoor climate. List of equipment: • Sepamatic 1800CT with cooler and ladder conveyor with height/pitch adjustment Bedpfxewh Rxts Adxjww • Bibun NF 180 • PallPack pallet wrapper • Mettler Toledo metal detectors,M33 and M34 • Hobart Box washer with additional heating element (18KW) and the option on running steam as heating source. • Saxlift lifting table, 2 pieces 1000 kg and 2 pieces 2000 kg • Socco box-taper • Amongst other equipment such as table scales, reols for freezing, Euro-Wagon/bin If any of these items are interesting, don’t hesitate to contact.

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Resonator: 6 kW Co2 Incl LiftMaster Additional Equipment Resonator: 6 kW Co2 Bodpfxewg Ig Es Adxjww Incl LiftMaster This 3-axis TRUMPF TruLaser 5030 classic 6,0kW + LiftMaster was manufactured in 2007. Ideal for precise CO2 laser cutting, this machine offers robust performance and reliability. Consider the opportunity to buy this TRUMPF TruLaser 5030 classic co2 laser cutting machine. Contact us for more information. Application Types Cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 35,000 h, TRUMPF TruLaser 3040 (L50) with Liftmaster Store L32 TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 3040 – 4 kW Year of manufacture: 2015 Working area: 4,000 x 2,000 x 115 mm Control: Siemens Sinumerik 840 D sl Laser power: 5,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 15 mm Bwsdpfx Aext Unaodxow Max. sheet thickness aluminum: 15 mm NC operating hours: approx. 35,000 h Laser on hours: approx. 14,500 h Accuracy Positioning deviation Pa: 0.05 mm Average repeatability Psmax: 0.03 mm Dimensions (L x W x H): 11,400 x 6,730 x 2,400 mm Weight: 13,000 kg EQUIPMENT Separate control unit and chiller Trumpf LoadMaster L32 Exhaust system Trumpf/Handte MF-L 2500 (Max. extraction capacity: 2,500 m³/h)