Used Console Milling Machine for sale (65,518)

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min Itsdpfxsvi I Nmj Ag Uob - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Itodpfx Aex I A Hveg Uob Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 4,000 rpm Itedpox I A Hiofx Ag Usb Tool holder SK50 Internal coolant supply with 22 bar Longitudinal chip conveyor

Condition: used, Year of construction: 1999, x-travel 1900 mm y-travel 800 mm Itedpfxerpa N Is Ag Ueb z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t

Condition: ready for operation (used), incl. tool holder Itjdpfx Ajyaxyhsg Ujb

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Isdpfxoiqu S Ej Ag Ujtb Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2003, x-travel 4.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain iTNC 530 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itjdjxylqropfx Ag Ueb Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: new, The Servomill® UWF 900, a top-tier model in the Conventional Vertical Milling Machines category, exemplifies the advanced engineering of KNUTH. This versatile machine integrates servo-conventional feed technology with a swiveling cutter head, offering remarkable functionality for various milling applications, including tool making and manufacturing. With an expansive work area of 1,235 x 460 mm and a travel range of 900 mm on the X-axis, the UWF 900 combines user-friendly operation with precise performance. The robust design features preloaded ball screws on all axes and high-quality servo motors that facilitate infinitely variable feed speeds, significantly enhancing productivity. Users can effortlessly execute complex tasks with the aid of electronic hand-wheels and joystick controls. Additionally, the machine is equipped with a range of standard accessories, including an automatic lubrication system and LED work lights. Offering high reliability and a long service life, the Servomill UWF 900 is a powerful choice for modern machining requirements. For a detailed quote or to obtain this exceptional milling machine, please request a quote today, and experience the precision and robustness of the UWF series in your own operations. Ijdpsuy Id Aefx Ag Uotb

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Iedpfeyaadnex Ag Ujtb Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm Isdpfsyaacwex Ag Uetb dimensions: 1066 x 1048 x 1330 mm

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Iodpfx Ajwm Rrwsg Uetb Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm Iedpfxefbt Huo Ag Uetb - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch Itjdslhwr Rspfx Ag Ujb - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Itodpfx Agsqa Txqe Usb Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition Itodpfx Ashik Ezjg Uob

Condition: good (used), Year of construction: 1986, Tiger FMT 700CC Year of manufacture: 1986 Heidenhain X-2500, Y-700, Z-1000 Itjdpfx Asyabr Hjg Uob ISO 50 Spindle speed: 40 - 1600 rpm Weight: 11,000 kg Including horizontal milling supports

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Ijdox U Eb Aepfx Ag Uetb Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: excellent (used), Edge banding machine with HolzHer 3 roller feed Itsdpfx Agovkgdre Ujb

Condition: used, Year of construction: 2005, x-travel 800 mm y-travel 550 mm z-travel 550 mm table dimensions 1.150 x 550 mm Control Matsuura G-Tech 30i spindle tunring speed 12.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Itodpox U Em Eefx Ag Usb - Internal coolant supply (ICS) - 4th axis (Nikken) Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm Iodpfx Agsw Ty S Ss Uotb - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: used, Year of construction: 1992, Vertical and horizontal milling machine Make: EUMEGA Type: MDV5 Year: 1992 Technical data: Make: Eumega Type: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions WxDxH: 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All data without guarantee. A demonstration is possible at any time in our exhibition hall. Ijdpfx Aewncwhjg Uotb

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. Itedpfx Aowhm Sieg Ujb A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2013, operating hours: 3,064 h, Applicable material: Asphalt Serial number: 10188210xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20327 Specifications: Itjdpfx Agowi Rc Ue Ueb - 2013 model - 3064 hours - Deutz engine - Hydraulic lift and lower - Milling width of 60 cm - Lower and raise function on the roof - Ready for delivery Description: We have a 2013 Bomag BM600/15 Asphalt milling machine for sale. Everything works as it should according to the owner. Services have been carried out at our own workshop. The milling width is 60 cm. Errors and defects may occur. Ready for delivery Hours: 3064 Own weight: 6800 Model: BM600/15

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel Itodjv Nxbyjpfx Ag Ueb - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t Isdpfxjg E Utxs Ag Uotb feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled