Used Compression Spring for sale (8,016)

Condition: used, Compressed air receiver, air storage tank, pressure vessel KAESER Factory No. 481127K Year of manufacture: 2001 Tank capacity: 1000 litres Operating pressure: 11 bar - hot-dip galvanized pressure vessel - 3 connection fittings with 2" thread - 2 connection fittings with 1 1/2" thread - 3 connection fittings with 1/2" thread - 2 x small handholes for cleaning - 3 x ball valves - 1 x safety relief valve - pressure gauge - 2 lifting lugs on the top of the vessel Tank diameter: approx. 800 mm Total height: 2300 mm with stand (without attachments) Weight: 230 kg Good condition Dcodpoxpqzuofx Agzsd

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. Dsdpfomt Dcxjx Agzecd 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating Dodpfxsxbzalo Agzocd

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Dedpfx Agemt Dcqezocd In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Dsdpexby D Aofx Agzecd Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. Dcodpfxsmt Dbhs Agzod 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system Djdpfxsmt Dcfs Agzscd The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. Dcsdox Apg Aopfx Agzsd The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, wire diameter (max.): 4 mm, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, feed length Y-axis: 20,000 mm, The machine is in full working order. It is being sold complete with a mechanical rotary table. The automatic rotary table shown in the photos is not included in the offer. Dcodoyhcq Tepfx Agzed

Condition: used, axle configuration: 2 axles, first registration: 07/1990, suspension: steel, tire size: 425/65-R22.5, Year of construction: 1990, Equipment: ABS, = Additional Options and Accessories = - Leaf suspension - Drum brakes = Notes = 1990 FLANDRIA 20FT chassis with leaf springs (3 leaves), ROR axles with drum brakes (2 x 10,000 kg), 20FT, 425/65-R22.5 tires (L: 8/6 mm; R: 8/11 mm), unladen weight: 3,095 kg, permissible total weight: 30,000 kg, Belgian registration with valid technical inspection until: 12.06.2026 = Further Information = Dcedpfx Agjw I D Imezsd Axle configuration Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 70% Weights Unladen weight: 3,095 kg Payload: 26,905 kg Gross vehicle weight: 30,000 kg Functional Body make: FLANDRIA OP CC 2 A Maintenance APK (Technical Inspection): valid until 06.2026 Condition General condition: average Technical condition: good Optical condition: average Further Information Please contact Arne Honingh for more information.

Condition: good (used), axle configuration: 2 axles, first registration: 08/1986, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1989, = Additional options and accessories = - Leaf suspension - BPW axles - Drum brakes = Remarks = 1989 SHLADOT 20FT swap chassis with leaf suspension (4-leaf springs), BPW axles with drum brakes, 20FT, 385/65-R22.5 tyres (L: 4/2 mm; R: 8/8 mm), unladen weight: 2,970 kg, permissible total weight: 28,000 kg, Belgian registration with valid technical inspection until: 23.04.2026 = Further information = Axle configuration Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 25% Rear axle 2: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 2,970 kg Payload: 25,030 kg Gross weight: 28,000 kg Functional Body brand: SHLADOT SD 90 Maintenance, history, and condition APK (technical inspection): valid until 04/2026 Technical condition: good Visual condition: good Further information Please contact Arne Honingh for more information. Dcedpfsw I Dkujx Agzjd

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Dedpfx Agjw A Srwezecd Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: like new (used), Year of construction: 2010, HANKINSON HHDP 1451 G REFRIGERATION DEHUMIDIFIER EFFICIENCY 24 m3/min Year of manufacture 2010 DEHUMIDIFIER FULLY FUNCTIONAL. Dedpsu Hyw Usfx Agzecd

Condition: excellent (used), Year of construction: 2016, BEKO DPRA 370/AC refrigerant dryer Dcodpfxev Snnnj Agzsd Efficiency 6.2 m3/min Year of manufacture 2016 The dryer is fully functional.

Condition: excellent (used), Year of construction: 2020, INGERSOLL RAND refrigeration dryer Capacity 13 m3/min, Dcjdpfx Asiuk D Djgzjd year of manufacture 2010 The dehumidifier is fully functional. I HAVE MORE COMPRESSORS FOR SALE SCREW REFRIGERATION DRYERS AND EQUIPMENT WELDING.

Condition: like new (used), Year of construction: 1998, KAESER SECOTEC TF 171 REFRIGERATION DRYER Capacity 17 m3/min Dcedpfjt Hdimox Agzed THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar Dcedpfx Agjt A Uwtezed level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 Dcodju Rpg Tepfx Agzod tested and ready for use.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Used refrigerated air dryer Atlas Copco FD1250VSD. Integrated frequency converter. 75 m³/min. Dcodpfx Aex Af Ehsgzsd

Condition: excellent (used), Year of construction: 2018, functionality: unexamined, Year of manufacture 2018 23 m³/min Dcjdpfxox Ab Raj Agzed

Condition: good (used), Compressed Air Line / Pressure Air Line made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Dcjdpfx Agsvv Nvnozod Sale / delivery of partial quantities is possible!

Condition: used, GENERAL Remarks: Manufacturer: Crane Type: 251301 Djdpfx Ajxqc Ddegzjcd Location: Bremen Condition: used

Condition: excellent (used), -Brand: Brevetti Gasparin -Model: Mod.450 -Dimensions: 1980x1605x915 mm -Usable bread length passage: 400–500 mm -Usable bread height passage: 100–140 mm -Standard slice thickness: 8.5 / 9.5 / 10.5 / 11.5 / 12.5 / 13.5 mm -Hourly output (sliced breads): 300–500 pcs -Power: 1.1 kW -Motor power: 1.5 HP Dsdewx Rkqepfx Agzscd -Compressor motor power: 2 HP -Voltage: 380V / 50Hz / 3ph -Weight: 385 kg -Year of manufacture: 2003

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, volume flow: 3,000 m³/h, pressure: 10 bar, power: 62 kW (84.30 HP), Good working Keaser heat regenerated adsorption dryer capacity 50.000 liters per min. connection DM 100 In good working condition Dcedpfx Agslddftjzsd complete with filters before and after also various Keaser carbon absorbers available

Condition: like new (used), Year of construction: 2017, operating hours: 64,630 h, functionality: fully functional, Used adsorption dryer CD150+. 9 m³/min. Dedpfxoxyy Nve Agzjcd