Piston compressor

ALUP HL 4004-Z10 SL

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Kdedpfszpwwpjx Aldst Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Ksdpeharwvefx Aldedt Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm Ksdpfx Alovpfzyododt spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 77 mm, turning diameter: 505 mm, turning diameter over bed slide: 505 mm, center height: 250 mm, center width: 1,500 mm, turning length: 1,500 mm, quill stroke: 180 mm, quill diameter: 80 mm, quill travel distance: 180 mm, total length: 3,095 mm, total width: 1,100 mm, total height: 1,525 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 13 rpm, swing diameter over cross slide: 270 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 40 mm, metric thread steps: 29, bed width: 340 mm, Turning diameter in gap: 700 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 13 rpm, swing diameter over bed slide: 505 mm, overall weight: 2,400 kg, rapid traverse X-axis: 1 m/min, rapid traverse Z-axis: 3 m/min, quill mount: MK 5, three-jaw chuck diameter: 250 mm, Trens SN500 Classic — Reconditioned Center Lathe, 2001 We offer this fully reconditioned Trens SN500 Classic center lathe, year of construction 2001, completely overhauled by original factory technicians to near-new condition. Machine details Manufacturer: Trens Model: SN500 Classic Year of construction: 2001 Kodpjzndb Eofx Aldedt Machine type: manual universal center lathe Control type: manual Max. swing over bed: 505 mm Max. swing over cross slide: 270 mm Max. swing in bed gap: 700 mm Distance between centers: 1500 mm Height of centers: 250 mm Spindle nose: BAJONET DIN (ISO702-III) B8 Spindle bore: 77 mm Spindle speed range: 12.5–2000 min⁻¹ (18 gears) Main motor output: 7.5 kW Max. torque: 1450 Nm Standard toolpost: 4-way toolpost, max. tool size 32×25 mm Tailstock sleeve: MORSE 5, diameter 80 mm, travel 180 mm Metric threads: 29 pitches, 0.5–40 mm Whitworth threads: 38 pitches, 1–80 TPI Machine dimensions (H×WxL): 1525mm ×1100 mm x 3095mm Weight: approx. 2400 kg (without accessories) Included accessories: 3-jaw chuck TOS Svitavy IUS 250/3-2-M1, ø 250 mm, B8 mount 4-jaw chuck Bison 4335-315-8, ø 315 mm, B8 mount Steady rest, ø 10–115 mm, with 3 friction contacts (rolling contacts available as paid option) Follow rest, ø 10–115 mm, with 2 friction contacts (rolling contacts available as paid option) Large steady rest I., ø 110–250 mm, with 3 friction contacts (rolling contacts available as paid option) Reconditioning scope All guideways ground and hand-scraped Spindle ground and reconditioned Tailstock quill ground All new bearings, including spindle bearings New gears New paint finish New plates (speed, feed, and thread charts) Machine is in excellent mechanical condition and ready for immediate use. Available for inspection. Geometric protocol available. Electronic machine manual on USB. For questions or further details, feel free to contact us by message or phone.

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Ksdpfjwnn S Rsx Aldjdt Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 Kedpfx Alev N Uyrsdodt - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds Kedjfv Av Depfx Aldedt their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Siemens Hinsch, side channel pump type CEHF 3104 -Motor: AEG 22 kW / 2915 rpm -Dimensions: 1680/800/H990 mm -Weight: 394 kg Kedpfx Alshn S Slsdodt

Condition: excellent (used), Year of construction: 2012, Kuka KR 240 R 2900 C Ultra Ksdpfx Aljn R Nh Rjdsdt Arm reach: 2896 mm Payload: 240 kg Year of manufacture: 2012 Controller: KUKA KRC4 Robot designed for suspended mounting.

Year of construction: 2018, condition: new, max. dia. of grinding wheel 175 mm boring diameter 32 mm Kdjdjlp U Ucjpfx Aldjt max. width of grinding wheel 25 mm