Used Cold Former for sale (1,979)

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available. Ihjdpeqxamgofx Ag Uot

Condition: excellent (used), Year of construction: 2012, KASTO circular saw, type: radial M6, year of manufacture 2012 In very good condition, like new. Barely used. Cutting range: Circular max: 90 mm Cutting speed: 26/53 m/min Ihedpewah E Uofx Ag Ust Saw blade: 315 x 2.5 x 32 mm Coolant system. Weight approx. 210 kg. Machine documentation available. For further information, see data sheets.

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades Iedex I Sfuepfx Ag Uoht

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface Iedex Eyhfepfx Ag Uoht -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min Ihsdpop E Efvsfx Ag Ust working direction: any work roll diameter: 80 mm

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Ihodpfxsp E Eglo Ag Uot working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min Ihjdpep E Ed Rofx Ag Ust working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Isdpsxnmn Ujfx Ag Ueht Year of manufacture: 1982 Equipment: - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system Ijdpfx Agswtdi Aj Usht - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: refurbished (used), TECHNICAL DESCRIPTION KKS 450 Iedjx N Ncaopfx Ag Usht KKS 450 Semi-automatic, hydraulic universal circular saw with rotary table for mitre cuts SAW BLADE Segmented saw blade Blade mount according to DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4 x 14/80 mm WORKING RANGE Round material 90°/45°: 125 / 150 mm Square material 90°: 115 / 140 mm 45°: 110 / 130 mm Flat material 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U-profiles upright 90°/45°: 120 x 55 / 140 x 60 mm U-profiles horizontal 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Cut lengths from 10 mm DRIVE POWER Saw motor: 1.8 / 2.7 kW Hydraulics: 1.5 kW Coolant pump: 0.1 kW CUTTING SPEEDS (Standard) 11.5 / 23, 13 / 26 m/min or 10 / 20, 11 / 22 m/min or 13 / 26, 15 / 30 m/min SAW BLADE FEED Continuously adjustable as per table: 0 - 1,000 mm/min Blade rapid return: 3,300 mm/min ELECTRICAL CONNECTION TN-S system – 3 phases, neutral, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: used, Guillotine Shears for Sheet Metal CNTA 3150/10A Technical specifications: Max sheet thickness: 10 mm Max sheet length: 3150 mm Iodpfeyaqklex Ag Usht Year of manufacture: 1980 The machine is operational, in good condition, and ready for work.

Condition: used, Year of construction: 1969, Plate rolling machine HPR 12 V&H ASYM HY For sale: a robust, heavy-duty plate roller in good condition. Iodpeyapimjfx Ag Ujht Set of rollers included. Year of manufacture: 1969

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119951, saw blade diameter: 760 mm, overall weight: 3,200 kg, Kaltenbach RKT 760 V Cold cutting circular saw designed for metalworking, often used in the steel and metalworking industries for precision cutting. TECHNICAL SPECIFICATIONS: -Disc diameter: up to 760 mm (it is also possible to use a disc with a diameter of 710 mm) Iedeumkylopfx Ag Usht -Power requirement: 5 kW -Machine weight: about 3.2 tons -Dimensions: approximately 2.3 x 2.15 x 2.1 meters -Cutting feed speed: adjustable from 0 to 1200 mm/min, with quick return at 3500 mm/min. -Cutting speed at 710 mm saw diameter: 11/22 m/min two-stage with V-belts -Range of gearbox adjustment: 200 mm -Cutting width: 6 mm maximum. -Production year 1998

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m². Ihedpfjvmtdkex Ag Uet

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: Ihsdpferz R Arex Ag Ujt One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: excellent (used), Cold circular saw Trennjäger, model VC 260 HA. Saw blade diameter: 315 mm. Cutting capacity: 90 mm. Cutting area for flat material: 160 x 65 mm. 380 Volt, 1.4 kW. Width: 1500 mm, depth: 1000 mm, height: 1400 mm. Supplied with a spare blade. Isdpfjxwt Tpsx Ag Ujht

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We would like to present an offer for the sale of a complete set of forming equipment, which includes: Forming machine: GEA MultiFormer 600 Feeding system: LIFT CL300S 32 complete sets of forming plates Additional incomplete sets of plates Transfer trolley for plates Set of essential spare and consumable parts The technical condition of the equipment is very good, and the package represents a ready-to-use solution for immediate implementation in your production process. Ihjdsx S Dx Iopfx Ag Uet Reference photos are attached. If you are interested in this offer, we would be happy to send you further technical details.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3515 104 114, saw blade diameter: 350 mm, cutting range round steel at 45°: 100 mm, cutting range round steel at 90°: 100 mm, total length: 800 mm, total width: 1,250 mm, overall weight: 350 kg, cutting range square steel at 90°: 90 mm, The KASTOdisc U 10 is a robust semi-automatic vertical cold circular saw, suitable for precise metal cutting in workshops and medium series. Featuring two speeds and an adjustable feeder, it offers flexibility and high-quality cuts, while the pneumatic clamp stabilizes the material. Ihedpfjwxcuzsx Ag Uot

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Ihodpfjwl Iw Uex Ag Ust

Condition: good (used), Year of construction: 2005, functionality: fully functional, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear for burr-free cold sawing of profile, panel, square, and round material in straight and miter cuts, pivotable on both sides from 90 degrees to 45 degrees to 30 degrees, with digital angle display (built in 2005) - Cutting range with saw blade ᴓ 450 mm: 90°, 45° right/left, 30° right/left - Round 140 mm 140 mm 130 mm - Square 110 x 110 mm 110 x 110 mm 110 x 110 mm - Rectangular 290 x 40 mm 190 x 40 mm 130 x 40 mm - Rectangular Profiles 290 x 70 mm 190 x 70 mm 130 x 70 mm Ijdpfx Agev Ryaae Usht This increases by approximately 10 mm for a saw blade ᴓ 470 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Machine is supplied without infeed and outfeed

Condition: good (used), 400mm wide screw feed former with recent control screen upgrade by GEA. Has been used for production of vegetarian products. Can be supplied with other machines to make a complete coating and frying line. Iodpfeg E S H Rex Ag Ujht

Year of construction: 2002, condition: like new (used), 28 T/D capacity Isdpfxeid Syis Ag Uoht

Condition: ready for operation (used), Year of construction: 2010, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: N1A/002531, saw blade diameter: 600 mm, Due to discontinued production, we are selling an automatic front-cutting saw with PC and software for calculating pieces per bar and scrap. Iodpex Rdb Hefx Ag Uoht

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. Ihedpfx Ageq Ukvxj Ust The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm Ihedpfxsxwl Ure Ag Ust 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)