Used Cnc Saw for sale (13,742)

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, Dsdpfx Aozg Eb Dehgsci C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 2007, Max. cutting diameter 340mm, max. cutting length 400mm, 66mm Bar capacity, Spindle speed 4000rpm, spindle motor power 22kW, milling speed 4,000rpm, 12 Station Turret, FANUC 32i Control, Dsdjzg Eayepfx Ahgjci parts catcher, parts conveyor, swarf conveyor, 3 jaw Chuck, coolant

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Serial Number 6644-1 Chuck manual 48 inch, supplied with jaws Dcodpfxjymc Ipe Ahgsi Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: used, Model:- AY 1000 x 1000, Serial No: Nc-A3-045 Dodpfxjyn R Hce Ahgjci 1 metre swing over bed, 1 meter between centres 390mm Swing Over Saddle 180mm Spindle Bore 4 Jaw Chuck 800mm Diameter Quick Change Tool Post Fagor 8055 controls Made In Taiwan

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Dcjdpjwwtrbefx Ahgei 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, 1519mm max turning length Renishaw Probing, swarf conveyor, A-Mist air filtration, FSE coolant filtration. Dcodpozilwwsfx Ahgei

Condition: excellent (used), Year of construction: 1997, operating hours: 16,100 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 3,000 mm, total width: 1,700 mm, total length: 2,840 mm, table width: 600 mm, quill travel distance: 500 mm, type of input current: three-phase, table length: 800 mm, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, overall weight: 3,500 kg, tank capacity: 550 l, Equipment: documentation/manual, Agie Compact 3 CNC EDM machine for sale. 1997 machine Fitted with System 3R Macro chuck on C axis. 10 station tool changer Dcsdpfx Ahszhwy Ujgji 16100 machining hours Macro - mini chuck shown in picture not included in sale

Condition: used, Year of construction: 2004, Mazak Integrex E-650H x 2000 CNC Multi-Tasking CNC Lathe. S/No. 168658 (2004) with Mazatrol Fusion 640MT Pro Control, Max Swing 920mm, Spindle Motor 45kW, Rotary Spindle Motor 37 kW, Max Spindle Speed 1600rpm, Spindle Bore 260mm Dia, X/Y/Z Travels 1025/650/2106mm, B-Axis -30deg/+210deg, C-Axis 360deg, Rapids X/Y/Z 40/40/40m/min, Max Rotary Tool Spindle Speed 10,000rpm, Tailstock Travel 1858mm, Tailstock Quill Stroke 160mm, Tailstock Centre MT6, Automatic 80 Position Toolchanger, Spindle Taper Capto C8, Cromar Swarf Conveyor. Country of Origin: Japan Dcedpszhmt Defx Ahgji Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: This lots is located in Birmingham, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: good (used), Infotec 1008 Rotary CNC machine Dcedpfx Ajx Ai T Nshgji adjustable RPM, manual or auto, 3Ph

Condition: repair required (used), Year of construction: 1997, machine/vehicle number: 26992, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 415 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,900 mm, cutting width (max.): 4,500 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, rotational speed (max.): 4,750 rpm, STRIEBIG Econom II Vertical Panel Saw (1997) Fully operational Striebig Econom II vertical panel saw removed from our professional joinery workshop following replacement with a newer machine. The machine is fully functional and was in regular use until removal. It cuts accurately, the carriage runs smoothly and all operating functions work as intended. The saw is being sold as in need of repair because it does not have a functioning motor brake, meaning it no longer complies with our workshop's health and safety requirements. It should therefore be inspected and recommissioned by the purchaser before being returned to service. Specification Manufacturer: Striebig Model: Econom II Year: 1997 Machine No: 26992 Dodpfx Ahozimnkjgjci 3 kW motor 415V, 3 Phase Maximum cutting height: 2200 mm Blade speed: 4750 rpm Dust extraction connection Viewing is welcome. Collection only from Finchampstead, Berkshire. Buyer responsible for loading and transport.

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, Dcjdpfjzd Eqaex Ahgji table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: good (used), Year of construction: 2011, Table size 3100 x 900mm, Dcjdpfszdq Abex Ahgsi traverses X Y Z 3100 x 1000 x 1050mm, spindle taper DIN 50, toolchanger capacity 24 stations, spindle speed 4,000rpm, automatic head, swarf conveyor,

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Dcedpfjzbidtsx Ahgei Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Dodperubg Hefx Ahgeci

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Djdpfx Ahjtq A Nxsgsci

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Dedpezb Ipzefx Ahgeci 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders Dodpfsq Atxyex Ahgeci 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908 Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dodpezgfvnefx Ahgeci

Condition: used, Year of construction: 1987, Feeler Series II High Accuracy Lathe, Model FTL - 618E1 with Anilam Wizard Lathe Series 2 Axis DRO. S/No. 7M171 (1987) Dedpfx Ajzgfnwshgjci Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Filtermist F7 Oil Mist Filter Extractor, Hours 37637. S/No. GTA - 959 - B Dsdpfozgfmmjx Ahgoci Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804 Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dodpfx Ahozgfk Ejgoci

Condition: used, Year of construction: 2004, Citizen Cincom C16 VT Sliding Head CNC Lathe with Mitsubishi Meldas 635 CNC Control, Machining Size 16mm Max, Machining Length 200mm Max, Spindle Though Hole Diameter 20mm, Main Spindle Speed 2- = 10,000rpm, Iemca Genius 118 Type 37LL Barfeeder. S/No. 020425BA02 (2004), Filtermist MX10 Oil Mist Filter Extractor. S/No. E5516 (2004) Dcjdpfx Ahszgfkrogoi Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002) Dcjdozgfi Iepfx Ahgji Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Filtermist FX3000 Oil Mist Filter, Hours 40691& 16285 (2002) Djdpezgfhqjfx Ahgoci Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, Dsdpfezcy S Rjx Ahgeci spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.