Used Cnc Portal Milling Machine for sale (92,795)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W Iedsu Tln Njpfx Aacjih VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: ready for operation (used), CNC Bed Type Milling Machine Make SECMU model C6 Table Size 2200 x 700 X travel 2000 Y travel 1200 Z travel 1000 Iedsxdduwopfx Aacoih ATC 60nos. complete with universal milling head

Condition: ready for operation (used), X-axis: 560mm, Y-axis: 410mm, Z-axis: 380mm. Controls: Mazatrol M-2. Without automation by vibratory bowl feeder. An on-site inspection is possible. Iiedow U T Tlopfx Aaceh

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Iiedpfx Aow R S Tpsacoh Spindle power: 7.5KW machine in stock.

Condition: good (used), Year of construction: 1989, Manufacturer: Deckel Iiodpfowy Dmhjx Aaceh Year of manufacture: 1989 Machine number: 2387-1582 Serial number: 25555 Type / Model: FP 2 NC Control: Dialog 11 Travel paths x-y-z: 400 - 200 - 400 mm Table: 1,400 x 550 mm Table extension: 1,200 x 370 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: Quill stroke: 150 mm Connection: 2.2 kW Accessories/Equipment: Condition: good Weight: t Dimensions: 2,500 x 2,500 x 2,000 mm Control cabinet: 900 x 800 x 1,400 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 1,330 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 608 mm, travel distance Z-axis: 608 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,330 h, coolant supply: 20 bar, We offer in almost new condition Hurco VMX42i with only 1330 spindle hours from 2019: X-Axis travel: 1067mm Y-Axis travel: 610 mm Z-Axis travel: 610 mm 12.000 RPM spindle with 239Nm torque Machine has following options included: Internal coolant 20 bar Touch probe Renishaw OMP40 Tool probe wireless Renishaw OTS Software options: DXF Iijdewy H Afopfx Aacoh Tool + Part probing NC Conversational merge Ultimotion Tool change optimization

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Ijdpfjw Ed U Nex Aacoih Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, TECHNICAL DETAILS - spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/r] - spindle stroke:210 [mm] - X axis machining range:850 / 1 000 [mm] Iodpfevxw Azox Aaceih - Y axis machining range:465 [mm] - Z axis machining range:750 [mm] - tightening dimension on table:1 570 x 500 [mm] - T slots:7 - distance between the slots:50 [mm] - width slots:12H8 - positioning accuracy:0.01 [mm] - repetition accuracy:0.005 [mm] - parts maxi weight:250 [kg] - driving power:5 [kW] - drilling capacity in steel:30 [mm] - tapping capacity in steel:M 20 - tapping capacity in cast-iron:M 24 EQUIPMENT - CNC HEIDENHAIN TNC 151 control

Year of construction: 1999, condition: ready for operation (used), X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible. Iodsw U Uatspfx Aaceih

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: Isdpfovupa Rjx Aacsih - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: new, Year of construction: 2023, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Heidenhain control Water-cooled inline motor 43 kW / 900 Nm Iijdeqrq Emopfx Aacsh Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Cable handwheel 2 x chip conveyor 60 tool changer

Condition: good (used), Maho MH500W2 Control: Heidenhain TNC232B Year of manufacture: approx. 1988 Spindle mount: ISO40 Spindle speed: 20-4000 rpm Ijdpfjw Id Igsx Aacoih Feed rate: 1-3000 mm/min Table size: 700x350 mm Coolant system Documentation Travel paths: X: 500 mm Y: 380 mm Z: 350 mm Weight: approx. 1800 kg The machine was powered up until recently and is in good, fully functional condition.

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Isdelu Hpgjpfx Aacjih

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming Ijdpfx Aow Tnhbeaceih - Coolant tank - Tool-holders

Year of construction: 1996, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Iijdsw U Dwbspfx Aaceh

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine Iijdpfxjwyivno Aacjh -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Iisdpfjvvh R Djx Aaceh Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: like new (used), Year of construction: 2007, Table size 2200 x 1000 mm Iisdjg Tdavepfx Aaceh Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Spindle speeds 12.000 rpm Spindle taper ISA 40 Power feed 1 - 8.000 mm/min Rapid speed Z-axe 15 m/min Rapid speed X - Y axis 20 m/min Control Heidenhain IT 530 NC Tool change 40 pcs

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper tip: ISO 50 Speed range: 20 - 3000 rpm Iiodpevfr Hbjfx Aacoh Spindle power: 17 kW

Year of construction: 2006, condition: ready for operation (used), Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Application Types Milling Iodsw Uaitjpfx Aacsih

Year of construction: 2009, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Iedpfx Asw U Dwnoacoih

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 Isdjhd Rm Uepfx Aacsih table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min

Condition: ready for operation (used), 1 used CNC bed milling machine with Heidenhain control system. Rotary table included. Ijdpfx Aowxxzqoacoih Further technical data will be added.

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Iijdjw U Dwhjpfx Aacoh

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Iedpow Tc Nyofx Aacoih