Used Cnc Portal Milling Machine for sale (66,001)

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Hnjdpfxjv N Uuvj Aagel Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Hnedpfxsyv H Hie Aagjl

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Hnedsw Nklhopfx Aagol Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Hnedpjw A Af Isfx Aagjl Good condition

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Hedpoywhvhefx Aagonl Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: good (used), Year of construction: 2001, CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Hnodpfod Eransx Aagjl Machine in good condition.

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Hodpfx Aoich Ehjagjnl Machine documentation available Machine is ready for demonstration.

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition. Hedpsiihxhjfx Aagsnl

Condition: defective spare-parts repository (used), Year of construction: 1990, spare parts CNC milling machine DECKEL FP5CC/T year 1990 spare parts How. Control DIALOG 11 Switch cabinet Complete Milling spindle vertical and horizontal ISO 40 Universal rotary tilting table Tool magazine with changer Chip conveyors, motors, U.S.W. Hnjdpfx Aajfgvu Usgel Please ask for request.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need. Hedpfodtdahox Aagonl

Condition: good (used), Year of construction: 1990, CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Procedures: X1000mm Y500mm Z500mm Spindle retainer: ISO 50. Hedpodtfhqefx Aagenl

Condition: good (used), Year of construction: 1988, CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Hnodpfx Aobu Em Aeagol Machine can be run under current.

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Hnodpfx Aaepcf D Iogel

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3500430, feed length X-axis: 690 mm, feed length Y-axis: 210 mm, feed length Z-axis: 390 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, table width: 210 mm, table length: 690 mm, type of input current: AC, table load: 100 kg, overall weight: 1,800 kg, input voltage: 400 V, Equipment: documentation/manual, CNC milling machine, Siemens 808D control. Hodovyz H Hepfx Aagsnl

Condition: ready for operation (used), CNC milling center YANG EAGLE 1000 with 20-fold tool changer x / y / z 900 x 500 x 500 mm Fanuc Series O-MD Type: SMV-1000 Model: C & H-3A UNIT FAN: 100 VA Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty. Hnodpfx Ajhlp Nujagel

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Hnedpfx Ajhlp Iwsagol Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Hnodjx N E H Uepfx Aagjl Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Many accessories Hsdpjq R Rb Hsfx Aagonl

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: VMX42, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,050 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 11 m/min, controller model: HURCO SingleMAX, HURCO VMX42 CNC Milling Machine with MAX Control System Manufacturer: HURCO Model: VMX42 Year of manufacture: 2006 Original price: €88,000.00 net (€104,720.00 gross) Working Area Travel X-axis: 1060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Distance spindle nose to clamping table: 150 - 760 mm Table clamping surface: 1270 x 610 mm Table load, evenly distributed: 680 kg T-slots in table (DIN 650): 5 T-slot width: 18 mm (H8) Slot spacing: 100 mm Drives Main drive-spindle Drive type: Three-phase motor Power (1 min duty cycle): 21.0 kW Max. torque at: 1450 rpm Torque at 1 min duty cycle: 142 Nm Feed drives Drive type: Three-phase motor Feed rates Programmable: 3 - 7600 mm/min *contour-dependent Adjustable via console: 3 - 11,400 mm/min *contour-dependent Rapid traverse X, Y, Z axes: 30 m/min / 30 m/min / 20 m/min Spindle Head Tool holder: SK 40 DIN 69871 Drawbar: DIN ISO 7388/II Type B Speed range: 10 - 10,000 rpm Design Features Machine bed material: Cast iron Type of linear guides: X, Y, Z Central lubrication: 1 pump (X, Y, Z) Automatic Tool Changer Tool magazine type: Drum magazine Tool positions: 24 Tool diameter with full loading: 80 mm Max. tool weight: 7 kg Max. tool length: 300 mm Max. total weight: 82 kg Measuring Systems Type of measuring system: Photoelectric Standard: Rotary Hnedpsylbd Hjfx Aagel Mounting: Motor side Measuring method: Transmitted light Resolution Internal control: 0.0005 mm Measuring system: 0.001 mm Accuracy according to VDI/DGQ 3441 Positional accuracy over travel: +/- 0.01 mm Repeatability over travel: +/- 0.005 mm Cooling Coolant tank capacity: 340 liters Installation Data Length x width x height: 4650 x 3400 x 2770 mm Weight: 6,800 kg Electrical connection: 38 kVA / 55 A / 400 V Compressed air connection: 6 bar / 0.3 cbm/min Control HURCO SingleMAX 1 monochrome screen, 2 software units (1 x plain text dialog programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system via RS-232 C or V 24 interface) Pentium technology, 1.6 GB hard drive, 8 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5" 1.44 MB drive. System self-diagnosis, DOS directory structure Includes 1 x color screen Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck) Detachable electronic handwheel DXF software: import of geometric data from DXF file and entry of technological data (tool number, radius correction, safety distance, machining depth and plunge feed) Accessories High-pressure cooling system for coolant supply through the spindle (coolant type: emulsion / coolant pressure 20 bar / integrated hydraulic tool clamping system). Cooling air switchable via coolant nozzles Chip splash guard cabin Machine lamp Machine manual on CD

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Hnjdpfow T Sl Dex Aagol Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Hodpfxjvftrxo Aagonl Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Hedpfoir U H Esx Aagenl For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1994, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a Deckel Mori 70 V gantry machining center. The machining center is ready for immediate use and fully functional. Technical specifications: Year of manufacture: 1994 Grundig Dialog 112 control system X travel 700 mm Y travel 550 mm Z travel 500 mm SK 40 chuck mount Brushless AC servo motor Drive type: Continuously variable 0-8000 rpm Feed speed: Continuously variable 10000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Knoll scraper conveyor belt Internal cooling system Rapid traverse x/y 30000 mm/min Rapid traverse z 20000 mm/min Transport and loading can be arranged throughout Europe upon request for an additional charge. Hodpfxsv T U Udj Aagsnl Prices plus VAT. Viewings available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: ready for operation (used), Year of construction: 2001, Technical Features of this Bridge Type Milling Machine Manufacturer ZAYER Model KPU-5000 AR Year 11/2001 CNC HEIDENHAIN TNC-430 Table surface 6.500 x 1.800 mm Longitudinal travel (X Axis) 6.500 mm Cross travel (Y Axis) 3.050+873 mm Vertical travel (Z Axis) 1.250 mm Distance between columns 2.450 mm Maximum height between spindle nose and table with spherical head 1.565 mm. Maximum height between spindle nose and table with 45º head in vertical position 1.574 mm. Rapid feed (X, Y, Z) 25.000 mm/min Max. working feed 15.000 mm/min Heads 45º Automatic head INCLUDED 45º Head (A Axis / B Axis) 360.000 posiciones Automatic Head 45º Taper ISO-50 – DIN 69871 Automatic Head 45º Speed 6.000 r.p.m. Spherical Rotation Head INCLUDED Direct Output Head Taper ISO-50 Main Motor Power 37 kW. Speed Ranges 2 Manual Head Change INCLUDED Retractable Automatic Support in the Right Side For 45º Head INCLUDED Retractable Automatic Support in the Right Side For Direct Output Head INCLUDED Ethernet Connection INCLUDED Double Chip Conveyor One at each side of the machine INCLUDED 1000 l Oil Tank with Filter Paper + Magnetic Separator INCLUDED Internal coolant 20 Bar INCLUDED External coolant10 bar INCLUDED Automatic tool changer INCLUDED ATC positions 60 CNC 3D ROT Function INCLUDED Others Positioning Accuracy 0.010 mm. Repetitive Accuracy 0.005 mm. Hnsdpfx Aoyxv Uneagsl Handwheel HEIDENHAIN HR-410 Carrying Load Table 20.000 Kg. Machine Weight 52.000 Kg.

Condition: ready for operation (used), Year of construction: 1995, Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible. Hjdpfxsytgnmj Aagonl