Used Cnc Machining for sale (64,049)

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: Ksdpfxoxfzzqo Ag Usdg • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Machining Center Holz-Her Eco-Master 7120 Year of manufacture: 2003 Technical condition: very good Kedpfx Agsya Nb No Usdg Technical data: - 1 milling head - drilling unit - 3 axes - dimensions: 2535 × 1283 × 130 mm - 90° saw - 6 traverses

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Kdedjx At Svepfx Ag Ueg Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Kdsdpfxoxgfbqo Ag Ujg

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm Kdsdpexpgf Nofx Ag Ujg 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Kodjwukyqjpfx Ag Ujdg Total number of drilling spindles: 16

Condition: used, machine/vehicle number: 008277, X axis working area: 5680 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 21 Total number of tool changer positions: 24 Kdsdpfx Agjx A Hgmo Usg

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left machine stand - Vertical drilling spindles: 12 Kedpfx Asx Hllxjg Usdg - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining zones for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with handheld control device - Included: 12 frame clamps, 8 large and 4 medium-sized suction cups Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: good (used), functionality: fully functional, Manual control units with 20 meters cable length Ksdpfx Aoxg Rn Neg Usdg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1188877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control HRT 160 4th axis 11 off BT40 toolholders Kdedpfxex Afpge Ag Usg High flow coolant system Lighting Enclosed guarding Manual

Condition: ready for operation (used), Year of construction: 2000, A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible. Kdodox Syv Ajpfx Ag Uog

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Kdodpfx Agexpgfis Uog Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 111855/111856/111640, overall weight: 2,250 kg, Offer package: Brother Machining Centers Two fully operational machines and one defective machine included as a free addition with complete package purchase. From first owner and for own use. Machines under power and ready for demonstration. Machine No. 1 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111855 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 2 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111856 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 3 Brother TC-22A – Year of manufacture: 03/2000 – Serial number: 111640 – defective Included free of charge with purchase of the full package Spindle drive PE9A300UXXXC03H defective Axis drives 2x PE9A50UXXXC01 defective Y-axis motor P10B10120JXSB1 defective Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm Kdedpfoxp N Dbsx Ag Ujg - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Accessories included: Through-spindle coolant pump IKZ 70 bar PKCE570-12 UA3 - Pump pressure: 210 bar - Capacity: 20 l/min - New and unused Total price for all three items. Ex works, Luckenwalde (Germany), not loaded and without transport. Individual sale of the machines may be possible.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 1,810 mm, total length: 1,930 mm, total width: 1,800 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 203 mm, overall weight: 4,500 kg, travel distance X-axis: 384 mm, travel distance Y-axis: 317 mm, travel distance Z-axis: 217 mm, grinding spindle motor power: 12,000 W, input voltage: 400 V, spindle nose: HSK-40F, CNC Tool grinding machine ANCA FX 5 Linear Ksdpfx Agjx Nqf Ne Uedg TECHNICAL CHARACTERISTICS: Colour touch screen: 19 ["] Stroke X axis: 384 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 317 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 217 [mm] Resolution Z axis: 0.0001 [mm] Stroke A axis: 360 [°] Stroke C axis: 230 [°] Resolution C axis: 0.0001 [°] Max. grinding lenght: 200 [mm] Max. grinding diameter: 200 [mm] Grinding spindle attachment: HSK-40F Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 12 [kW] Max. diameter grinding wheel: 203 [mm] Max. part weight in part holder headstock: 20 [Kg] Supply voltage: 400 [V] Total power required: 16 [kVA] Machine dimensions: 1930 x 1800 x 1810 [mm] Weight: 4500 [Kg] EQUIPMENT INCLUDED: x1 FANUC tool loading robot x1 set of glass scale rules on the X and Y axes x1 RENISHAW part probe More information upon request.

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] Kedox Av Adopfx Ag Ujdg - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Kdsdpfoxy Tmnsx Ag Usg

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Kedoxy Tlwopfx Ag Usdg

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Kjdpfx Agjx N Atfe Usdg

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Kdodpewf Hw Hofx Ag Ueg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 Kdsdpfewnii Rjx Ag Ueg - Drilling unit present: No - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - System/software: SCM Maestro - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Ksdpfx Agewwa Hls Uodg Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Kodpfxewnhcce Ag Usdg Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information Ksdpfx Agswnhans Uodg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: overhauled Description: The machine concept is extremely straightforward. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking mechanism centers the workpiece within the machine. Upon foot pedal activation, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). Vertical spindles drill from below, ensuring that chips do not remain on the workpiece as they would on conventional machining centers. The horizontal spindles work on two sides of the workpiece. The workpiece length can be unlimited, as it is moved toward the drilling unit (X-axis). The drilling spindles, either individually or in a group, are freely programmable and move along the Y-axis. Drill depth and horizontal drilling operations are managed by the Z-axis. After all drilling operations are completed, the workpiece is conveyed back to the insertion side or, if desired, to the discharge side. Kodpfewmhmfox Ag Usdg Unlike conventional machining centers, where the workpiece is clamped using vacuum pods that need to be adjusted to the workpiece size, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest space: - Line boring - Structural drilling - Fitting drilling - Case connector drilling Equipment: - Welded machine frame - Drilling head with 7 vertical spindles and 1 horizontal twin spindle - 3-axis CNC control: - X: NC-controlled panel feed via traversing pneumatic clamp - Y: NC-controlled drilling head movement - Z: NC-controlled spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs at the infeed - Pneumatic transport clamp - Pneumatically lockable side stop with rollers - PC-based control with Windows XP (1 GB flash memory) - 8" color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed speed (X-axis): 30 m/min - Spindle speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum overall drill bit length: 70 mm - Drill bit holder: 10 mm shank with clamping surface - Connection power: 2.5 kW - Extraction nozzle diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support at infeed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: short-term Location: North Rhine-Westphalia

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used machine Year of manufacture: 2008 Condition: Still in production Features and technical specifications: CNC control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = +- 90 degrees C = +- 270 degrees HSD milling unit with 10 kW, liquid-cooled Stepless speed control up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle drilling unit with pneumatic pre-stroke, mounted on the milling unit. 16 individually selectable vertical drilling spindles 1 double horizontal drilling spindle in X-direction, and 1 identical in Y-direction Drill holders: each with 10 mm diameter Note: Maximum workpiece height machinable with drilling unit = 900 mm, referenced to X/Y spindle Milling and drilling units with dust extraction connection 200 mm diameter, each with pneumatic shut-off valve, combined connection to customer's extraction unit, 300 mm diameter Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 slots for tool diameters up to 90 mm or max. 160 mm with sorted placement, max. tool length 160 mm. One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 magazine positions. Special tool lengths up to max. 180 mm possible with corresponding reduction of working area. Maximum tool weight 6 kg (incl. HSK holder). Total magazine weight approx. 60 kg. Magazine positioned at the output side of the unit. Machine table: 8 support traverses, manually adjustable along machine length, each traverse with 1 retractable workpiece stop, fixed towards operator. Table surface can be divided into two clamping setups, per station: - 1 length stop, pneumatically adjustable (up/down) Kdjdpjx Enqzefx Ag Ujg - 2 pneumatically adjustable glide rails (up/down) - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with intermediate tank, 250 liter capacity. 16 vacuum suction cups, 110 mm diameter Suction cup assortment for stair manufacturing incl. touch valve. 1 clamping device for posts/curved components Including chip conveyor Including NC-Hops 5 Wop system Including bumper safety device at front, and fence at side and rear Central lubrication Rated power: 21 kW Fuse protection: 63 A Availability: approx. March 2026 Location: Westerwald