Used Cnc Vertical Milling Machine for sale (87,065)

Condition: used, Year of construction: 2003, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm Ub7Vxkm9At control Heidenhain TNC 426 tool changer: number of tool places 32 Pos. tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,4 t In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 73,730 h - Spindle hours: 16,362 h Accesories: - Renishaw measuring probe Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Machine/vehicle number: 011 595, CNC control, SK40 holder, 1 disk defective, cooling lubricants to be disposed of by the buyer Cwxs8Isr0W

Year of construction: 1996, Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Rtk2Cnsmvz Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2001, Operating hours: 26,266 h, Milling machine, VMC Model: CNC Manufacturer:&nbsp DMG / Deckel MAHO Type:&nbsp DMU60T Year of manufacturing:&nbsp 2001 Control:&nbsp Heidenhain Working-hours: 26266 Travel:&nbsp 630x560x560mm Spindle-speed:&nbsp 10.000&nbsp rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video&nbsp available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm Fpkysksxv

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm distance spindle nose and table min. 170 -max. 550 mm control TNC 407 milling feeds 3 + 2000 mm/min rapid traverse 5000 mm/min spindle drive 5,5 kW Begdvsg2T total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407,

Year of construction: 2000, Condition: good (used), Chiron FZ 12 W pendulum table Year of manufacture: 2000 Control: Siemens Sinumerik 840 D travel: X 550 / Y 300 / Z 425 spindle speed: 11000 / min Cs0Dforath spindle mounting: SK 30 Power: 10 kVA weight: 4000 kg Condition: Used, ready for operation, without rifle power

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Ub7Krwka32 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 1975, Condition: ready for operation (used), - Travels 1.600 / 600 / 600 mm (X/Y/Z) - Overhauled mechanics/geometry - Axis drives Spindle drive new - hydraulic unit new - new E-control - Siemens CNC control 820M Gbacpg0Rl - 20 workpiece holders SK50

Condition: used, Year of construction: 2011, x-travel 500 mm y-travel 240 mm z-travel 530 mm Control SIEMENS 802S base line table-size 750 x 210 mm spindle taper ER32 throat 260 mm spindle turning speed range 150 - 8.600 U/min feed speeds 2.000 mm/min total power requirement 3,0 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,9 x 1x2 x 1,9 m Machine comes from a university and was used sporadically. including vice including electric Handwheel including work light including coolant pump Ciaf7P7F including machine feet including central lubrication Stable CNC milling machines with professional Siemens 802 S baseline control, ideal for users in mold making Ball screw spindle from HIWIN in all axes Solid, precise cross table, large dimensions and precisely surface-machined. Heavy, solid cast design Adjustable wedge strips Very wide speed range Continuously variable drive Electronic handwheel reduces setup time to a minimum Compact housing design Foldable housing side parts for easy access to the machine The work area is clearly visible from three sides thanks to clear Macrolon panes Base is designed on two sides. Front with access to the coolant tank Rear with access to the electronics and the Optimum CNC controller IV Siemens Micromaster as a frequency converter All doors with safety switches ER32: for high speed and normal machining Linear guide in the Z axis Central lubrication

Year of construction: 1991, Condition: good (used), Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Caap3G3Apt Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Feed length X-axis: 1,800 mm, Feed length Y-axis: 1,600 mm, Feed length Z-axis: 1,250 mm, Spindle speed (max.): 3,300 rpm, Rotational speed (min.): 3,300 rpm, Machine type WH 105 CNC Year of manufacture 2012 delivery March 2013 Technical parameters: Spindle speed: max 3300 rpm Table lateral movement - x-axis: 1800 mm Longitudinal table movement - z-axis: 1250 mm Vertical table movement - y-axis: 1600 mm Rotary table: : 1400x1600 mm Dose8L B: 360°

Condition: new, Year of construction: 2024, Functionality: fully functional, Feed length X-axis: 330 mm, Feed length Y-axis: 3,200 mm, Feed length Z-axis: 240 mm, Travel distance X-axis: 300 mm, Travel distance Y-axis: 3,200 mm, Travel distance Z-axis: 240 mm, Feed rate X-axis: 16,000 mm/min, Feed rate Y-axis: 16,000 mm/min, Feed rate Z-axis: 16,000 mm/min, Spindle speed (max.): 24,000 rpm, Spindle speed (min.): 12,000 rpm, Quill diameter: 20 mm, Rapid traverse X-axis: 35,000 mm/min, Rapid traverse Y-axis: 35,000 mm/min, Rapid traverse Z-axis: 35,000 mm/min, Total height: 1,700 mm, Total width: 5,180 mm, Total length: 2,330 mm, Position of the milling head: Vertical, Type of input current: three-phase, Table load: 250 kg, Overall weight: 1,300 kg, Space requirement width: 6,700 mm, Space requirement length: 2,900 mm, Space requirement height: 2,000 mm, Warranty duration: 12 months, Power: 13 kW (17.68 HP), Equipment: Documentation/Manual, Rotational Speed Infinitely Variable, The CNC milling machine ADF 0230Pro is designed for high-speed cutting and milling of aluminum profiles and any other non-ferrous metals. All-welded frame of the machine, with vibration annealing Fully enclosed and protected working area, visual contact with the cutting area - Processing zone X, Y, mm - 300*3200 - Z axis stroke, mm - 240 - Fixation of the workpiece - Pneumatic clamps - movable along the guides, 4 pcs. - Feed mechanisms - helical rack along the "X" and "Y" axis mod. 1.25, ball screw gear 2005 - Z - Drives of linear movements - Servo motor, 750 W - Positioning accuracy, mm - 0.05 - Spindle - 7.5-9 kW air cooling - Automatic tool change function, 6 tool holders - ISO30 - Professional control, NC Studio V15 (Lambda-4S control board, increased processing performance) - Planetary gearbox - Spindle revolutions, rpm - up to 24,000 - Collet type - ER 32 Bmgvfnnzf0A - Term of warranty service, month - 12 - Non-contact inductive sensors on all axes - Tool height sensor Built-in control cabinet The processing area is closed - All seats under the guides are milled on a CNC machine in one installation

Condition: new, Year of construction: 2024, Functionality: fully functional, Feed length X-axis: 1,350 mm, Feed length Y-axis: 2,000 mm, Feed length Z-axis: 300 mm, Travel distance X-axis: 1,350 mm, Travel distance Y-axis: 2,000 mm, Travel distance Z-axis: 300 mm, Feed rate X-axis: 8 mm/min, Feed rate Y-axis: 8 mm/min, Feed rate Z-axis: 8 mm/min, Spindle speed (max.): 24,000 rpm, Spindle speed (min.): 12,000 rpm, Quill diameter: 13 mm, Total height: 1,550 mm, Total width: 2,060 mm, Total length: 3,350 mm, Type of input current: three-phase, Rotational speed (max.): 24,000 rpm, Rotational speed (min.): 12,000 rpm, Overall weight: 1,600 kg, Input voltage: 380 V, Warranty duration: 12 months, Input frequency: 50 Hz, Power: 6 kW (8.16 HP), Equipment: Documentation/Manual, Emergency Stop, Rotational Speed Infinitely Variable, The ADF 1320 Stone milling machine is designed for high-quality milling and engraving of stone and metal in 2D/3D planes. PROCESSING MATERIALS Stone (marble, granite, etc.), wood, composite materials, polystyrene, non-ferrous metal, plexiglass, model plastic, etc. APPLICATION Ritual services: Dhsea22Xb Simple and complex reliefs with artistic carvings, bas-reliefs, sculptural compositions, memorials, etc. Interior decoration: Elements of fireplaces and billiard tables, stairs, plinths, parquet, etc. Exterior decoration: Figured moldings on windows and doors with carving through. Decorative elements for decorating wooden houses and baths. Board balusters for finishing verandas and gazebos, fences, etc. Exclusive wood and metal products: Frames for mirrors, panels, figures of people and animals, souvenir products, boxes, chess, backgammon, icons, writing sets, watches, etc. Modeling: Makes master models, foundry models, product prototypes, vacuum forming molds, dies and clichés from a variety of materials including aluminum, brass, bronze and modeling plastics. Artificial stone processing: Curvilinear cutting of artificial stone for the production of countertops, decor, etc. LINEAR MOVEMENT AND MECHANICS The all-welded frame of the machine is made of a steel profile with a rectangular section. The bed is milled along the plane and the places where the guides are attached to achieve maximum evenness of the entire surface. HIWIN rail linear guides are installed on the machine. The torque from the stepper motor is transmitted to the gear rack along the XY axes. Along the Z-axis, the torque is transmitted through the ball screw. The guides on all axes are protected by a special cover to prevent dust and dirt from entering during operation. The working table of the basic configuration machine is covered with an aluminum profile with T-shaped grooves. Coolant and bathtub installed. ELECTRICITY AND ELECTRONICS The electronics are mounted in a separate electrical cabinet, isolated from vibrations, overheating and other external influences. All components and connections are located in strictly designated places for inspection and maintenance. The machine is powered by a 380 V (220) network. Working area (X*Y*Z), mm 1350*2000*300 Table covering Steel T-slot with PVC coating Fixation Mechanical X, Z square guides HIWIN, standard size 20 Square Y guides HIWIN, standard size 25 Drive mechanism X, Y Toothed helical rack Z ball screw drive mechanism, size 2505 X,Y,Z drive motor Stepper Spindle: Power / rotation frequency 3.2 kW water cooling, up to 24,000 rpm Collet type ER 20 Control system NCStudio V5.5.60 - Tub for collecting coolant Coolant pump YC - 30 l/min. Presentation of coolant Pneumatic shock absorber along the "Z" axis System of lubrication of carriages and guides

Condition: new, Year of construction: 2024, Functionality: fully functional, Travel distance X-axis: 400 mm, Travel distance Y-axis: 300 mm, Travel distance Z-axis: 100 mm, Feed length X-axis: 400 mm, Feed length Y-axis: 300 mm, Feed length Z-axis: 100 mm, Feed rate X-axis: 15,000 mm/min, Feed rate Y-axis: 15,000 mm/min, Feed rate Z-axis: 15,000 mm/min, Position of the milling head: Vertical, Spindle speed (max.): 24,000 rpm, Spindle speed (min.): 900 rpm, Table width: 420 mm, Table load: 50 kg, Table length: 320 mm, Tool mount: 10 mm, Table height: 110 mm, Total height: 600 mm, Total width: 880 mm, Total length: 1,000 mm, Type of input current: AC, Rotational speed (max.): 24,000 rpm, Rotational speed (min.): 900 rpm, Quill diameter: 10 mm, Spindle motor power: 1,500 W, Power: 3 kW (4.08 HP), Equipment: Emergency Stop, Rotational Speed Infinitely Variable, Table-top CNC milling machine ADF 3040mini One-piece frame made of polymer concrete Bmguln8Ixzj The design is a monobloc with a moving aluminum table. Working area with noise and dust protection - Processing zone X, Y, mm - 300*400 - Z axis stroke, mm - 100 - Workpiece fixation - Mechanical - The material of the table covering is aluminum D16T - Feeder mechanisms - 1605-X, Y, 1204-Z - Positioning accuracy, mm - 0.05 - Spindle - 1.5 kW air cooling - Spindle revolutions, rpm - up to 24,000 - Collet type - ER 11 - DDCS V3.1 controller - Drive of linear movements - power stepper Nema23 motor - Power supply, V - 220 - Term of warranty service, month - 12 - Non-contact inductive sensors on all axes - Tool height sensor LED - illumination of the working area Tray for collecting shavings Built-in control cabinet Hermetic processing area - All seats under the guides are milled on a CNC machine in one installation

Condition: new, Year of construction: 2024, Functionality: fully functional, Travel distance X-axis: 800 mm, Travel distance Y-axis: 1,200 mm, Travel distance Z-axis: 240 mm, Feed length X-axis: 820 mm, Feed length Y-axis: 1,300 mm, Feed length Z-axis: 240 mm, Feed rate X-axis: 16,000 mm/min, Feed rate Y-axis: 16,000 mm/min, Feed rate Z-axis: 16,000 mm/min, Position of the milling head: Vertical, Spindle speed (max.): 24,000 rpm, Spindle speed (min.): 6,000 rpm, Table width: 800 mm, Table load: 300 kg, Table length: 1,200 mm, Tool mount: 13 mm, Total height: 1,850 mm, Total width: 1,360 mm, Total length: 1,920 mm, Type of input current: AC, Rotational speed (max.): 24,000 rpm, Rotational speed (min.): 6,000 rpm, Overall weight: 400 kg, Quill diameter: 13 mm, Spindle motor power: 3,200 W, Power: 3.2 kW (4.35 HP), Equipment: Rotational Speed Infinitely Variable, CNC milling machine ADF1208 - Processing zone X, Y, mm - 800*1200 - Z axis stroke, mm - 240 - Workpiece fixation - Table with t-slots - Table covering material - Aluminum profile - Feed mechanisms - ball screw transmission on all axes, X, Z - standard size 2005, Y - 2505 - Guides - square linear guide axes Y, X - HGR20, Z - HGR15, accuracy class H - Max. speed of movement (idle), m/min - 16 E2N8Oki - Working speed, m/min - 0-8 - Positioning accuracy, mm - 0.05 - Spindle - 2.2 kW water cooling - Spindle revolutions, rpm - up to 24,000 - Collet type - ER 20 (maximum Ø of the cutter shank 12.7 mm) - Drive of linear movements - Servomotor, 750W - Centralized lubrication system - Oil mist system - Software - NC - Controller - DDCS V4.1 - Power supply, V - 220 - Power, kW - up to 7 - Term of warranty service, month - 12 - Weight, kg - 430 Features of the machine: - Non-contact inductive sensors on all axes - Tool height sensor - Corrugation protection of all guides - All seats under the guides are milled, accuracy ±0.05 mm - Rigidity of the machine structure Types of processed materials: wood of any kind, composite materials (chipboard, fiberboard, MDF, plywood, etc.), Alucobond, Dibond, any polystyrene (including PVC and polystyrene with polycarbonate), getinax, artificial stone, soft non-ferrous metals, acrylic glass and plexiglass, model plastic, etc.

Condition: used, Year of construction: 1980, spindle diameter 105 mm cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm spindle stroke - max. 600 mm spindle taper ISO SK 50 spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° total power requirement 82 kW weight of the machine ca. 18 t Cb9Cb0Wilm dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was reconditioned and retrofitted with Siemens 840 D control in 2003. Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and new spindle drive Siemens built in 2008.

Year of construction: 1999, Condition: excellent (used), - control: Heidenhain TNC 310 - table size: 320 x 250 mm - travel range: X= 400, Y= 250, Z= 400 mm - tool holder: ISO 40 Bjjumyoc dimensions LxWxH: 1600 x 1500 x 1900 mm weight: ca. 1200 kg

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min B9Ubdojcfy rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 1989, x-travel 0700 mm y-travel 450 mm Dpkfpp z-travel 500 mm table-size 680 x 380 mm feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 8 kW milling head -swivable +/- 90 ° CNC control 432 PHILIPS total power requirement 23 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with 432 Control and universal table.

Condition: good (used), Year of construction: 2009, Automatic CNC drilling and milling machine with doweling unit. Cfhij82Jk Make: PRIESS UND HORSTMANN, year of manufacture: 2009, basic dimensions: approx. 30x17 m, output: 4 components/min, workpiece length: 140-2,100 mm, workpiece width: 100-800 mm, workpiece thickness: 12-100 mm, gantry loading, make: Priess und Horstmann, type PBA-62ZM, year of manufacture: 2009, component measurement, roller conveyor with measuring device, vertical drilling station for drilling from above, extraction device, 3 roller conveyors with material feed, type PBA-62ZM, year of manufacture: 2009. 2009, component measurement, roller conveyor with measuring device, vertical drilling station for drilling from above and below, suction device, 3 roller conveyors with material alignment, horizontal drilling station with glue application and dowel setting, 1 roller conveyor with material alignment, roller conveyor turning station, material deflection station consisting of: Roller conveyor/belt conveyor with 2 outfeed stations, 2 manual fitting assembly stations, each consisting of: 2 belt conveyors with shelf section, instruction monitor, material transport and deflection station, consisting of: Roller conveyors/belt conveyors, carcass press, Priess and Horstmann, type KP-CNC, built 2008, serial no. 1847, workpiece length 160 x 2,250 mm, workpiece width 300 x 2,000 mm, workpiece thickness 220 x 800 mm, material deflection and outfeed station, each consisting of: Roller conveyors/belt conveyors, safety fence system, partly with LEUZE Solid-4 laser cabinet system, system control with switch cabinet system and various control terminals

Condition: good (used), Year of construction: 1998, Operating hours: 9,691 h, x-path 700 mm, y-path 315 mm, z-path 495 mm Table clamping surface 1,230 x 410 mm Control Heidenhain TNC 415B Tool changer: Number of tool positions 32 Pos. Tool holder SK 30 B8Eomuykw0 Measuring probe, 4e axis Spindle hours: 9691 h From research workshop, not a production machine. Measuring probe and tools included

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 Ub8Tq99Pkt In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Hu3Mxco Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected Ub8Rvmukj9 under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm Fzjbsb0 y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!