Used Cnc Machining Centre for sale (65,744)

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Dedpfj Ahmu Tex Acyswd Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, Dodpfx Ajxqyg Nocyowd 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Dwjdpfx Aco Ahmvfjyed Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg Dwjdpfx Acez A Ia Sjyjd without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: ready for operation (used), Manufacturer: Leistritz AG, Nuremberg Type: POLYMAT 50/400 CNC-S Year of manufacture: 1990 Control system: Leistritz POLYMAT CNC (fk electronic) Maximum cutting width: approx. 50 mm Maximum working stroke: approx. 400 mm Maximum pulling force: approx. 15.9 kN Feed per stroke: approx. 0–0.5 mm Maximum cutting speed: approx. 20 m/min, continuously variable Maximum return speed: approx. 40 m/min Table size: approx. 440 × 595 mm Hydraulic drive: approx. 5.5 kW Connection: 380 V / 50 Hz Machine weight: approx. 1,700 kg Dsdpfx Acj Ah Ivnjyowd

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Dwodpfxj Ahkxvo Acysd Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. Dwodpfx Ajzz Hywscyod "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up. Djdpfx Aj Ahkxyecyowd

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Dwsdpsu A U Nkefx Acyod Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Djdpo Ain N Rofx Acyswd Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 25, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, - Year of manufacture: 1994 Dsdpfj Ahhbmjx Acyewd - First owner, used for own operations - Fully functional, powered, ready for demonstration - Control: Fanuc 0MC - Working area X-axis: 800 mm - Working area Y-axis: 450 mm - Working area Z-axis: 510 mm - Table working surface: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 min-1 - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 positions - Machine weight: 7000 kg - Serial number: 208 Net price, unloaded, ex works Luckenwalde (Germany), excluding transport. Loading can be arranged through an external service provider for an additional charge of EUR 1,000.00. Sale is only possible within Germany or the European Union!

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Dwjdpfo Ahkyaox Acyod Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Dedpfozz Rc Ajx Acyswd Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: excellent (used), Year of construction: 2002, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2018! TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm B-axis swivel range: -15° to +90° Spindle speed: 12,000 rpm Dwedpfo Afw Ahox Acyed Tool positions: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours: 50,033 h Spindle operating hours: approx. 17,000 h Spindle replacement: 11/14/2018 EQUIPMENT Controlled B-axis in the milling head 32-position tool changer Coolant system

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor. Dsdpfez Ha H Sex Acyowd

Condition: used, CNC turning machine MONFORTS, Type RNC 300 MultiTurn with powered tools and Y-axis Dsdpfx Acjzfau Aeyewd Year of manufacture 2005 CNC control FANUC Series 18i-TB Turning diameter over bed slide cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - hydrostatic guides for the X, Y and Z axes - with tailstock - main spindle with chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 powered tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Dodpfx Aozr H Ivjcyewd Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec Dsdpetnh Aljfx Acyswd MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Year of construction: 1993, condition: used, Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Dwjdsz R S Thjpfx Acyed Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power connection: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10641 Manufacturer: HERMLE Type: C 1200 V Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Germany Machine-No.: 193XXXX X-Travel: 1200 mm Y-Travel: 900 mm Z-Travel: 500 mm Tool Taper: HSK 63 Tool changer: 30 Spindle Speed: 16000 RPM Weight Of The Machine Ca.: 14 t Further information: Dwjdpfx Aco Ahmvueysd The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Djdpfs Af Nlmox Acyowd

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Dwodpfx Ae Ad Iw Hecysd Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine Dwedpfx As Ad Iw Tscyod HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Dsdpo Adzhlofx Acyjwd

Condition: good (used), Year of construction: 2026, Ref. -No.: 10648 Manufacturer: HAITIAN Type: V10 Year of construction: 2026 Type of control: CNC Control: FANUC 0i-MF Storage location: Halberstadt Country of origin: China X-Travel: 1000 mm Y-Travel: 600 mm Z-Travel: 600 mm Spindle Taper: SK 40 Table Dimensions (Lengthxwidth): 1200 x 600 mm Table Load: 800 kg Max. Tool Weight: 8 kg Max. Tool Length: 300 mm Max. Tool Diameter: 80 mm Numbers Of Tools In Magazin: 24 Turning Speeds: 8000 RPM Rapid Traverse X-Axis: 36 m / min Rapid Travel Y-Axis: 36 m / min Rapid Traverse Z-Axis: 36 m / min Distance between spindle nose and table: 150 - 750 mm Machine length: 2800 mm Machine width: 3550 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 6,5 t Tool-tool change time: 2,5 sec Feed rate X-axis: 15 m / min Feed rate Y-axis: 15 m / min Z-axis feed rate: 15 m / min Positioning accuracy: 0,008 / 0,006 / 0,006 X/Y/Z Repeatability: 0,005 / 0,004 / 0,004 X/Y/Z T-slot in the table: 5 x 18 x 100 mm Dsdpfxs Ahkx Se Acyewd Further information: - Documentation / Manual - Steplessly adjustable spindle speed - Chip conveyor - Drive type: Belt drive - Pull stud: MAS P40T-I (45°) - Power supply: 30 kVA - Pneumatic and hydraulic lubrication system - Coolant system - Internal coolant tank with chip conveyor - Full enclosure - Air gun - 3-color signal tower light - Standard accessories - Chip trolley This is a brand-new machine available at short notice, with a wide range of customization options to meet individual customer requirements. Various control systems, including FANUC, HEIDENHAIN, and Siemens, as well as different spindle configurations and a wide range of additional equipment options, are available. This allows the machine to be tailored to specific production requirements and machining applications.