Used Cnc Machine for sale (64,763)

Condition: good (used), Year of construction: 2026, Ref. -No.: 10648 Manufacturer: HAITIAN Type: V10 Year of construction: 2026 Type of control: CNC Control: FANUC 0i-MF Storage location: Halberstadt Country of origin: China X-Travel: 1000 mm Y-Travel: 600 mm Z-Travel: 600 mm Spindle Taper: SK 40 Gedo Ahkx Sjpfx Aikebw Table Dimensions (Lengthxwidth): 1200 x 600 mm Table Load: 800 kg Max. Tool Weight: 8 kg Max. Tool Length: 300 mm Max. Tool Diameter: 80 mm Numbers Of Tools In Magazin: 24 Turning Speeds: 8000 RPM Rapid Traverse X-Axis: 36 m / min Rapid Travel Y-Axis: 36 m / min Rapid Traverse Z-Axis: 36 m / min Distance between spindle nose and table: 150 - 750 mm Machine length: 2800 mm Machine width: 3550 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 6,5 t Tool-tool change time: 2,5 sec Feed rate X-axis: 15 m / min Feed rate Y-axis: 15 m / min Z-axis feed rate: 15 m / min Positioning accuracy: 0,008 / 0,006 / 0,006 X/Y/Z Repeatability: 0,005 / 0,004 / 0,004 X/Y/Z T-slot in the table: 5 x 18 x 100 mm Further information: - Documentation / Manual - Steplessly adjustable spindle speed - Chip conveyor - Drive type: Belt drive - Pull stud: MAS P40T-I (45°) - Power supply: 30 kVA - Pneumatic and hydraulic lubrication system - Coolant system - Internal coolant tank with chip conveyor - Full enclosure - Air gun - 3-color signal tower light - Standard accessories - Chip trolley This is a brand-new machine available at short notice, with a wide range of customization options to meet individual customer requirements. Various control systems, including FANUC, HEIDENHAIN, and Siemens, as well as different spindle configurations and a wide range of additional equipment options, are available. This allows the machine to be tailored to specific production requirements and machining applications.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Gbjdpfoy N Du Dox Aikjw Good condition

Condition: used, Offered for sale: CNC milling machine with enclosed machine guarding. Equipped with a milling spindle, enclosed machining area with viewing window, workpiece support and compressed air hose. Inspection possible by arrangement. Gbodpfj Aga Iqex Aikjw

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Table surface: 450x450 mm Max. table load: 200 kg Gbjdpfxo Aivkaj Aiksw Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Weight: 7,700 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Gjdpfxs Ain Iwe Aiksbw Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1997, rapid traverse X-axis: 30 m/min, total height: 2,930 mm, total length: 2,700 mm, total width: 2,210 mm, overall weight: 7,500 kg, spindle motor power: 10,000 W, HERMLE C 800 U CNC 5-Axis Universal Machining Center Manufacturer: HERMLE Model: C 800 U Year of Manufacture: 1997 Serial Number: 11981 Control System: HEIDENHAIN TNC 430 Technical Specifications: Travel X-Axis: 800 mm Travel Y-Axis: 600 mm Travel Z-Axis: 500 mm Table Size: 540 × 540 mm Swivel Range: +° / −° Spindle Speed: –8,000 rpm (optional up to 15,000 rpm) Spindle Power: 10.5 kW Tool Holder: ISO 40 Tool Changer: 30 tool positions Rapid Traverse X/Y/Z: 30 m/min Coolant Tank: 300 l Operating Voltage: 400 V / 50 Hz Total Power: 31 kVA Dimensions (L × W × H): 2,700 × 2,210 × 2,930 mm Weight: approx. 7,500 kg Weight approx.: 7,500 kg Tool Changer: Yes Spindle speed: 8000 - rpm Tool holder type: ISO 40 Travel Z-axis: 500 - mm Spindle performance: 10.5 kW Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 2700 x 2210 x 2930 mm Rapid traverse: 30 m/min Swivel range ° Number of tool locations: 30 Control: HEIDENHAIN TNC 430 Travel Y-axis: 600 - mm Table Dimensions: 540 x 540 mm Year of construction: 1,997 Gjdpfx Aj Aimnqoiksbw Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Gbsdpfj Ain Nisx Aikew Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: 21-0153, travel distance X-axis: 6,150 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 140 rpm, total length: 3,350 mm, total height: 2,800 mm, table width: 570 mm, total width: 10,000 mm, table length: 6,510 mm, drilling capacity: 40 mm, table height: 45 mm, rotational speed (max.): 2,300 rpm, rotational speed (min.): 140 rpm, Equipment: documentation/manual, rotational speed infinitely variable, We would be happy to provide you with a video of the machine in operation upon request. We offer this used BAUER BOHRMAX Z60 drilling and milling machine, manufactured in 2021, for sale. Includes: Manual vise SPM 3 (total of 8 pieces) Manufacturer: Bauer Maschinenbau GmbH Type: BOHRMAX Z60 Year of manufacture: 2021 Serial number: 21-0153 Connection value: 11 kW The BAUER BOHRMAX Z 60 machine is in excellent condition and is equipped with all accessories. -Travel on the X-axis (longitudinal): 6,150 mm. -Stepless speed adjustment from 140 to 2,300 1/min Drilling capacity in structural steel: 3 to 40 mm -Tool holder SK 40 -Pneumatic tool clamping -Coolant system in the machine stand for the drilling tool -Table thickness: 45 mm -Access protection on the operator side by means of a light barrier -Chip tray -Automatic tool length measurement. -Handheld control unit -Running tool changer: -Swiveling angle drilling head: -Minimum quantity lubrication in addition to the standard coolant system. Gbjds Ai Dh Hepfx Aikjw -3D probe SK 40: for measuring the workpiece zero point in X, Y, and Z -Chip conveyor Z 60: Length: 6,000 mm -Software extension for DXF data import -Virtual machines: Definition of up to eight virtual workspaces with their own zero points. -Software for drilling angled holes -License for one office workstation If you have any questions or require further information, please feel free to send us a message or call us. The machine can be picked up from March 1st, 2027.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10724 Manufacturer: DMG Type: DMC 70H duoBLOCK Year of construction: 2007 Type of control: CNC Control: Siemens 840D powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 800 mm Z-Travel: 800 mm Tool Taper: SK40 Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 10000 RPM Max. Torque: 286 Nm Feed Capacities X/Y/Z: 10.000 N Rapid Traverse: 60 m / min Max pallet load: 600 kg Size Of Pallet: 500 x 500 mm X-axis acceleration: 7 m/s² Acceleration Y- and Z-axis: 7 m/s² Gedpfxs Ai I Epe Aikebw Workpiece Diameter: 800 mm Workpiece Height: 900 mm Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, CNC machining center Manufacturer: SCM Type: Morbidelli Author 430S Year of manufacture: 2006 Technical data - Working area: 1300x3600x180 mm - Equipped with milling spindle, drilling unit, and saw - Horizontal machining units Gjdpfxjz Inkbo Aikjbw - Original SCM software - The machine is in good working condition. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2013, machine/vehicle number: 20130207F, with measuring table, dimensions: 6000 x 3000 mm, table plate weight: approx. 13,500 kg, measuring probe, manufacturer: RENISHAW. Gbjdpfxj Af Nivj Aikow

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Probe tips: M2 Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Gjdozii Dzjpfx Aikjbw Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2010, condition: used, Offered is a CNC oxy-fuel cutting system with gantry design. Track width: 5500mm, maximum travel speed: 24000mm/min, fuel gas: propane, control: ESAB VISION T5, renewed in 2022, two A5/200 oxy-fuel tool carriages, COOL-JET BIE 220 cutting torches, automatic height control, manual torch angle adjustment, travelling operator console, laser-based plate position detection, torch carriage extraction hood, transverse extraction duct, extraction fan, emergency-stop pull wires at the front and rear. Inspection possible by arrangement. Gbodpfx Aij Ai T Aaeksw

Year of construction: 2013, condition: used, Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible. Gsdpfxj Ahq Nrs Aiksbw

Condition: used, Year of construction: 2007, Morbidelli / SCM Author X5 44 EVO, manufactured in 2007. 5-axis CNC machining center with a console table and vacuum clamping system. Working area X × Y during milling: 4,400 × 1,780 mm Console depth: 1,500 mm Milling and drilling operations Tool magazine and automatic tool changer Separate control panel with screen and handheld device Gsdps Ahzqaefx Aikebw Vacuum pump Machine weight according to the nameplate: approx. 5,000 kg Xilog Plus 1.13.988, as shown in a screenshot from 2023. Expected availability from December 2026. Images from 2023 and April 2026; PC/software photos and video recordings from 2023. Scope of supply and viewing by appointment. Price upon request.

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Clamping devices: 6 clamps Gsdpfx Aisz Er Hhekjbw Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Thread cutting aluminum: up to M12 Thread cutting steel: up to M8

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Gjdefg Ep Dopfx Aiksbw Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Gbodpfjzz I N Tjx Aikjw Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Gedpfezii Dhjx Aikebw Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, CNC turning machine MONFORTS, Type RNC 300 MultiTurn with powered tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Turning diameter over bed slide cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - hydrostatic guides for the X, Y and Z axes - with tailstock - main spindle with chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 powered tools with collet ER 25 - chip conveyor with integrated coolant system Gbsdpfx Ajzfau Aoiksw - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Year of construction: 2000, condition: used, Offered is a CNC die-sinking EDM machine with electrode changer. X/Y/Z axis travels: 350/250/300mm. C-axis: 360°. Control system: Charmilles CNC control. Equipped with a 4-position electrode changer (one holder defective) and various electrode holders. Low operating hours. Weight: approx. 2500kg. Inspection possible by arrangement. Gbode Agwqljpfx Aikjw

Condition: used, Year of construction: 2013, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source with automatic gas console and Contour Cut Extraction table 121126ä Gjdpfxj Ahx Ste Aiksbw

Condition: new, Year of construction: 2026, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2026 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Gjdpfexc Tr Aox Aikobw Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: new, for processing profiles made of aluminum, PVC, and steel, with 5 CNC-controlled axes Two separate and independently pneumatically opening safety doors Description of the base machine, variants, and options are available upon request: Milling spindle: 8.5/10.0 kW S1/S6 6.8,5/8.0 Nm S1/S6 max. 24,000 rpm, liquid cooling with HSK-F63 tool holder with minimal quantity pulsed lubrication for the tools, including level monitoring Tool magazine: Tool magazine in revolver design 12 positions for drilling, milling, and threading tools End mills up to max. Ø 200 mm 1 position for saw blade max. Ø 350 mm, only for processing aluminum and plastic Workpiece clamping: 8 pneumatic profile clamps, all individually and automatically positioned by motor. MMI version: Repositioning during machining including MAM module MDT version: Dividing a profile into sections, repositioning the sections, and continuing processing, see options! Workpiece positioning: Gbjdpfe Ait Epex Aikew one pneumatic reference stop on the left and right, and two in the middle Travel distances: X-axis: 7580 mm Y-axis: 1450 mm Z-axis: 470 mm C-axis: ±320° B-axis: ±185° Detailed diagrams are additionally available for the precise determination of the working areas Maximum machining areas: X-axis: 7,180 mm Y-axis: 300 mm Z-axis: 230 mm Control software: CAD/CAM in 3D technology Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Five-sided machining by swiveling and rotating the spindle End face machining using end mills Operating modes: One profile over the entire machining length Two profiles in divided machining length Lubrication system: Automatic central lubrication, CNC-controlled for all axes with level monitoring Operation: 18.5" TFT Mouse & keyboard Connection data: Electrical: 400V/50Hz (3-phase+N+PE), 32 A, Delivery without power cable Pneumatics: Pressure 6 - 8 bar Included: MeSoft 2.0 graphical programming software, excluding Office license

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Gjds Af Nlmspfx Aikjbw