Used Cnc Jig Boring Machine for sale (64,982)

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Gbodpjz A Ia Ssfx Aikjw Weight 8800 kg (weighed on the crane) in good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Gbedpfx Aijzwvqkekjw Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: ready for operation (used), CNC Milling Machine - Vertical Machining Center Manufacturer: MORI Seiki Year of manufacture: 1993 Type: MV40B Machine number: 4175 Control system: MSC-516MB Travel in x – y – z: 800 – 410 – 510 mm Table: 1,100 x 450 mm Tool holder: SK 40 Tool changer: 30 positions Gbjdps Aitqiefx Aiksw Spindle speed: up to 8,000 rpm (?) Rapid traverse x-y: 20 m/min Rapid traverse z: 15 m/min Equipment: Accessories: Condition: good Power consumption: 19.6 kW Machine dimensions: mm Weight: 6.1 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Gedpfx Ae Ah H Txeiksbw Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Gbsdo Ahkyaopfx Aikow Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Year of construction: 1993, condition: used, Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power connection: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Gbedpfez R S Thox Aiksw Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. Gbsdpszz Hywsfx Aikow "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Gbjdpfjzvwiljx Aikew Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, Year of construction: 2021, CNC portal-type oxy-fuel cutting machine Manufacturer: Messer Gbjdpfx Aszyableikjw Type: MultiTherm Eco 3600 Year of manufacture: 2021 CNC control: Global Control Track gauge: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel torches, type ALFA MS 4452/250 Cutting thickness: max. 150 mm Bevel cutting possible Automatic gas control (OmniFlow) for cutting oxygen (max. 15 bar) Extraction system: Keller dry separator, type Vario 2 Software: OmniWin2021 121126ä

Condition: good (used), Deckel FP4 MK Milling Machine Technical Data: Travel distances X/Y/Z: 500 / 400 / 400 mm Spindle taper: ISO 40 Gedpfxj Aggg Do Aikobw Spindle speed: 50–2,500 rpm Digital position display: 3-axis Heidenhain TNC 113 Tool clamping: Hydraulic drawbar Drill chuck: 90 mm stroke Universal rotary table: Type 2038 Cooling: Coolant system installed Accessories: Including machine vice Machine weight: Approx. 1,700 kg

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Gedpfsz I Nawsx Aikebw Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: Gsdps Ain N Refx Aiksbw - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: used, Used, well-maintained CNC tool milling machine MIKRON, model: WF 7D, with HEIDENHAIN control. Table clamping surface: 600 x 1200 mm Travel distances: X-axis, Y-axis, Z-axis 900 mm, 560 mm, 500 mm Gjdj Ahz D Aspfx Aiksbw Spindle mount: SK 40 Spindle speed, continuously adjustable: 5 – 5000 rpm Feed rate, longitudinal and transverse: 0 – 8000 mm/min Rapid traverse, longitudinal and transverse: 8000 mm/min Feed rate, vertical: 0 – 6000 mm/min Rapid traverse, vertical: 6000 mm/min Drive power, main drive: 8.5 / 11.5 kW Dimensions W x D x H: 240 x 360 x 220 cm Weight approx. 4500 kg Technical data and dimensions: Subject to change.

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t. Gbodpfx Aju T Ty Hoikew

Condition: good (used), Year of construction: 2008, Ref. -No.: 10641 Manufacturer: HERMLE Type: C 1200 V Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Germany Machine-No.: 193XXXX Gbjdps Ahmvujfx Aikjw X-Travel: 1200 mm Y-Travel: 900 mm Z-Travel: 500 mm Tool Taper: HSK 63 Tool changer: 30 Spindle Speed: 16000 RPM Weight Of The Machine Ca.: 14 t Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: used, x-travel 2500 mm y-travel 2000 mm z-travel 1600 mm w-travel 800 mm control Siemens 840 D boring spindle diameter 150 mm bore spindle turning speed range 4-1500 U/min Feeds, stepless (Y, Z) 1-9999 mm/min Rapid Feed Y, Z, W 10000 mm/min Boring spindle taper ISO 50 Milling spindle taper ISO 60 surface area 1600 x 2000 mm workpiece weight max. 12500 kg total connected load 90 kW Gsdezv Ulkepfx Aiksbw weight of the machine ca. 32200 kg

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Gsdpsf Ncadefx Aikobw Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72.122, functionality: fully functional, number of axes: 3, overall weight: 1,500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of controlled axes: 3 Working area X: 2,500 mm Working area Y: 900 mm Working area Z: 70 mm Milling spindle Number of milling spindles: 1 Tool holder: ISO 30 Spindle speed: 12,000–24,000 rpm Spindle speed control: Stepless Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Main motor power: 4 kW Connected load: 12 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,600 x 2,700 mm Weight: 1,500 kg Number of transport packages: 1 EQUIPMENT Horizontal drilling unit Vertical drilling unit Gedj Af Hgpjpfx Aikobw Sawing unit Manual operation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] Gode Ahhdpepfx Aikjbw INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Gjdpfxszw U Nfs Aikebw Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Position indicator: digital for X/Y/Z Machine vice: included Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. Gsdpfe Ahkwijx Aikjbw The machine can be viewed while powered up.

Condition: used, total height: 2,700 mm, total length: 9,000 mm, total width: 3,400 mm, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes Gjdpfsx Hwhxsx Aikjbw - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport dimensions: 9000mm x 3400mm x 2700mm (l x w x h) - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Gjdps Ain Rksfx Aiksbw Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Year of construction: 2013, condition: used, Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible. Gbjdpfx Ae Ahq Nrsikjw

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Gsdpfx Aiod I R E Nekjbw Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel