Used Cnc Deep Hole Drilling Machine for sale (66,670)

Year of construction: 2008, condition: ready for operation (used), A Peddinghaus saw and drilling combination system is available. 1) Saw unit Peddinghaus 1100 DG, max. product diameter: 510mm, max. product dimensions X/Y: 1100mm/500mm, cutting speed: 150m/min, saw blade dimensions X/Y/Z: 9300mm/54mm/1.6mm, max. product weight: 500kg, working height: 630mm, system dimensions X/Y/Z: approx. 2000mm/4500mm/2300mm, weight: approx. 5500kg. 2) Drilling unit Peddinghaus PCD 1100, drilling spindles: 3, tool holder: MK4, spindle power: 10kW, spindle speed: 900rpm, spindle stroke: 330mm, travel path Y/Z: 470mm/1100mm, rapid traverse: 5m/min, feed rate: 300mm/min, max. hole diameter: 40mm, product thickness range: 6.3mm–460mm, product width range: 76mm–1100mm, min. product length: 1575mm, max. product weight: 8165kg, clamping pressure vertical/horizontal: 800kg/2200kg, machine dimensions X/Y/Z: approx. 2400mm/1900mm/4500mm, weight: approx. 6000kg, control system: Siemens 840D i. Without roller conveyor for saw. Including cross conveyor. The saw shows a hydraulic leak, the chip brush motor is defective, and the spindle may require repair. Documentation available. On-site inspection possible. Kwedpfx Adexp Rbzotst

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Kedeu Tln Nopfx Adtowt Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), A hole row drilling machine from Knoevenagel is offered here. Data: Table size: 58 x 43 cm (with a scale of 0-50 cm) The table is height-adjustable and tiltable Ksdpfsd Sdurox Adtewt VGC 18809 420 V 4.0A 15 spindles All further information as well as the condition can be found in the pictures.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained high-precision CNC jig boring machine SIP MP 600 Machine built 1995 - 2007, converted to HEIDENHAIN iTNC 530 and completely overhauled. Table 1100 x 700 - free passage between the columns 750 mm Spindle diameter of the hydrostatic spindle 130 mm - 1 micron concentricity! Conversion to HEIDENHAIN CNC 3-axis interpolation. Kwedpfju Titzox Adtst Reading accuracy of the boring spindle less than 1 micron - hydraulic weight and load compensation in the crossbeam. This machine is in fantastic condition - we would be happy to demonstrate it to you in our warehouse under power. Price (domestic plus 19% VAT) ex warehouse Delivery time: immediately - subject to prior sale and errors. Payment: As usual, net before collection. Technical data is non-binding - errors excepted.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2300x1780 mm Weight 4000 kg Total power requirement 27,2 kw Kwjdpfjvz Hrdox Adtjt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x1220x1400 mm Weight 275 kg Total power requirement 1,5 kw Kjdpfx Adevz Eibetowt

Condition: good (used), Year of construction: 2017, functionality: fully functional, throat depth: 300 mm, total length: 5,000 mm, total height: 1,980 mm, overall weight: 450 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 300 mm, travel distance Y-axis: 4,000 mm, column diameter: 140 mm, drilling depth: 175 mm, controller model: Siemens S7-1200 mit 7" Farb-Touchdisplay, drive type: Servomotoren, measuring range X-axis: 4,000 mm, normal drilling capacity: 45 mm, thread cutting capacity: M 36, The drilling machine can be used both manually and fully automatically. After each drilling operation, the drill moves fully automatically along the X and Y axes to the next drilling position, thus completing the automatic drilling process. UNIMAX 4 Pillar Drill Powerful, universally applicable pillar drill with continuously adjustable feed rates and spindle speeds. Cycle programming is possible for complex workflows, chip breaking, chip removal, LCD graphics with operator guidance, digital display of speed, drilling depth, and feed, automatic spindle alignment for tool removal, electric drill guard. Kodswfd Ayspfx Adtowt Technical specifications: Continuous drilling capacity 40 mm* Standard drilling capacity 45 mm* Thread cutting capacity M36 MK 4 spindle Drilling depth 175 mm Thrust 300 mm Spindle/table 70 to 825 mm Table surface 650 x 500 mm T-slots according to DIN 650 14 mm Column diameter 140 mm Total height 1980 mm Weight 475 kg Feed rate 30 to 1650 mm/min Frequency-controlled three-phase motor 7.5 kW Infinitely variable spindle speeds 30 - 2400 rpm Operating voltage 400 V Frequency 50 Hz Mains fuse 16 A Safety contact – plug and connection cable included. Connection only to a VDE 0100-compliant mains supply with a functioning protective conductor. Residual current circuit breaker over 100 mA Noise level when idling at maximum possible spindle speed Accessories •Turret head •Drill guard for uni 4+BS 50 •Anti-twist device •Motorized height adjustment •Gas spring relief 25 kg •Flanged spindle sleeve MK4 •Automatic ARBO 20 turret head with 6 mounting holes •A20 gear motor •MK4 driver •Clamping sleeve for attaching the drill head to the drill press •A20 thread cutting spindle for SWE 1 quick-change adapters, 1:1, M3-M16 with LA •Quick-change adapter for SWE 1 taps •Work spindle 1:1 with quick-change chuck •Bilz ASR 25 •Clamping range with ER25 up to D16mm •Tool holder for quick-change chuck •Pneumatic vice, clamping width: 300mm FURTHER PICTURES AVAILABLE UPON REQUEST

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Kwedjw D Evlepfx Adtet

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Kedpfjvriq Rsx Adtewt

Year of construction: 1989, condition: ready for operation (used), Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible. Kjdpfx Aevyr I Ijdtjwt

Condition: new, Year of construction: 2024, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm Ksdpfol D Rw Esx Adtswt A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Kodpot H Twyefx Adtewt

Condition: used, machine/vehicle number: 008011, X axis working area: 6200 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 10.5 KW Number of controlled axes: 4 axes Kwedpfx Aewu Af Ejdtet Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Kwjdpjvxr Raofx Adtjt

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Kwsdpfx Aovwf R Rodtot

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Kjdpfx Adovwf N Hetewt

Condition: used, Year of construction: 1980, second hand Make Scheer Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Kwsdovwfuvspfx Adtot Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm Kwsdpfxevwgage Adtst required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Kodpjvyurcjfx Adtswt Drilling from below stroke 60 mm Stop rulers with central adjustment Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Space required approx. 1300 mm x 1000 mm x 1300 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining Kwodew E H E Rjpfx Adtot - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Kjdpfx Ajxpwf Tedtjwt Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded Kwedpfefu Ivzex Adtst

Condition: new, Year of construction: 2021, Horizontal CNC drilling machine for hinges or dowels, etc. The CNC drilling machine is designed for horizontal side drilling in wooden panels, furniture boards, etc. It is most commonly used for drilling hinge holes. Thanks to CNC control, machining is carried out automatically according to the entered program. Machine bought new in 2021 as a backup, only used a few times for testing. TECHNICAL DATA Kwjdpfx Aoxwnvfodtot Spindle motor power - 2.2 kW Max spindle speed - 24,000 rpm Table dimensions - 550 x 3,000 mm Z-axis travel - 34 mm Number of clamps - 8 Power supply - 400 V Machine dimensions - 3,400 x 1,800 x 1,300 mm

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 GS-tested number of spindles 23 pieces Kedpfepgkqpsx Adtswt number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Year of construction: 2006, condition: used, CNC SELCA 4045 1200 X 1500 MM TURNTABLE TABLE X AXIS TRAVEL 2200 MM Y AXIS TRAVEL (VERTICAL) 1000 MM V AXIS TRAVEL (DRILLING) 1000 MM Z AXIS TRAVEL (MILLING) 360 MM W AXIS TRAVEL (APPROACH) 500 MM B AXIS ROTATION ( TABLE ) 360,000 MAXIMUM DRILLING CAPACITY 5. 40 MM MAXIMUM TAPPING CAPACITY M 30 MILLING TOOL TAPER : ISO 40 AXIS FEEDS X Y V W 0 - 10000 MM/MIN DRILLING AND MILLING SPINDLE MOTOR POWER 9 KW WEIGHT 26000 KG DRILLING ROTATION 4200 RPM MILLING ROTATION 4500 RPM WORKPIECE WEIGHT IN ROTATION 12000 KG WEIGHT OF STATIONARY WORKPIECE 18000 KG MAXIMUM DIAMETER OF THE ROTATING PART DIA. 2700MM Kwsdpfxjq Nni Se Adtst TOOL CHANGER FOR MILLING TOOLS 20 PLACES PAPER FILTRATION SYSTEM