Used Cnc Deep Hole Drilling Machine for sale (66,785)

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Kdjdewphgdjpfx Ag Usg Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) Ksdpfxoq Hgg Uo Ag Uedg ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE Ksdpfstnh Alox Ag Ujdg MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors Ksdpfxsxz Aygs Ag Uedg * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Kodpfox Tpytsx Ag Uodg

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, stop rulers Ksdpfxovtm Aye Ag Uedg

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Kdsdowmmt Ropfx Ag Ueg Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: excellent (used), HEIDENHAIN TNC-310 Kdedpfsfrbtdsx Ag Ueg Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH

Condition: good (used), We offer contract deep-hole drilling work. From a diameter of 0.5 to 400 mm and up to a drilling depth of 12,000 mm, everything is possible! Please contact us and we will be happy to prepare a quotation for you. Please let us know the quantity, the material, the drilling diameter and the drilling depth. Kdjdport T U Esfx Ag Ujg

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: overhauled Description: The machine concept is extremely straightforward. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking mechanism centers the workpiece within the machine. Upon foot pedal activation, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). Vertical spindles drill from below, ensuring that chips do not remain on the workpiece as they would on conventional machining centers. The horizontal spindles work on two sides of the workpiece. The workpiece length can be unlimited, as it is moved toward the drilling unit (X-axis). The drilling spindles, either individually or in a group, are freely programmable and move along the Y-axis. Drill depth and horizontal drilling operations are managed by the Z-axis. Ksdpfx Aewmhmfeg Uodg After all drilling operations are completed, the workpiece is conveyed back to the insertion side or, if desired, to the discharge side. Unlike conventional machining centers, where the workpiece is clamped using vacuum pods that need to be adjusted to the workpiece size, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest space: - Line boring - Structural drilling - Fitting drilling - Case connector drilling Equipment: - Welded machine frame - Drilling head with 7 vertical spindles and 1 horizontal twin spindle - 3-axis CNC control: - X: NC-controlled panel feed via traversing pneumatic clamp - Y: NC-controlled drilling head movement - Z: NC-controlled spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs at the infeed - Pneumatic transport clamp - Pneumatically lockable side stop with rollers - PC-based control with Windows XP (1 GB flash memory) - 8" color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed speed (X-axis): 30 m/min - Spindle speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum overall drill bit length: 70 mm - Drill bit holder: 10 mm shank with clamping surface - Connection power: 2.5 kW - Extraction nozzle diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support at infeed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: short-term Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2018, Machine No. 368,824 Type: 0571A Year of construction: 2018 Current: 3/400V/50/60Hz/12 Kw/32Amp Control voltage: 24DC V Ksdpfx Agsv Naakj Uodg

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h Kedpfx Aotvmtkog Uodg table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Storage location: Nattheim Kdodswkir Depfx Ag Ueg

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. length: Miscellaneous diameter: Miscellaneous Shank: Miscellaneous mass: 12 kg Kdsdpfx Agevy Apij Uog Application: woodwork

Condition: used, Scheer Type DB 5 dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction as well as for precise joints in interior design. Includes a comprehensive range of dowel drill bits. drilling spindles: 21 division: 32 mm passage width: max. 1.000 mm Pivot: pneumatic Kdodpowp E Uxjfx Ag Ueg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Kjdsq R Rb Hopfx Ag Uodg Many accessories

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Kdsdswgkt Uepfx Ag Ueg Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Ksdpfjx A Hbkjx Ag Uodg Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2800x1100x2200 mm Weight 1100 kg Total power requirement 8,8 kw Kdodpfx Agjvz Hwao Usg Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - cess length 2440 mm - cess length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Total power requirement 1,5 kw Kdodpfovz Er Asx Ag Ujg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1100x1350 mm Weight 500 kg Kdjdpfx Asvz Eizjg Ueg Total power requirement 3,5 kw

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 950082, drilling depth: 1,000 mm, travel distance X-axis: 1,500 mm, type of input current: three-phase, This machine is equipped with a Bosch CC100 M control system and has a defect. All motors and the drive are in working condition. The machine can be used for retrofit or as a source of spare parts. Kedpfxex Afbpj Ag Uedg

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Kjdpfx Aexc Hi Uog Usdg Drilling unit: swiveling

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Ksdpswv Nb Nsfx Ag Uodg Drilling unit: swivelling

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Kdodpfx Ajdg Itneg Uog Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2