Used Chisel for sale (156)

Condition: new, Center length ----- 1500 mm Center height ----- 250 mm Nodpfx Aaega Tz Re Eewr Spindle diameter ----- 500 mm Main spindle passage ----- 80 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 KW HEAVY DUTY VERSION - WEIGHT 3250 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 ridges * 3 Chuck * 4 Chuck * Clamping plate * Fixed and moving glasses * LED working light and cooling system * Box with various tools

Condition: used, Year of construction: 2010, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2010 Control : Siemens 840 D Turning length : 1245 mm In General: Year of construction:2010 Control system:Siemens 840 D Rotation diameter:1,600 mm Rotation height:1,245 mm Spindle / Table: Technology:Geared spindle Speed:450 rpm Power:60 kW Torque:13,400 Nm Faceplate:1,400 mm Max. table load:9,000 kg Tool carrier: Traverse path crossbeam:600 mm Traverse path chisel slide Z-axis:1,100 mm Traverse path chisel slide X-axis:+/- 950 mm Max. plunge diameter:340 mm Cross-section of chisel slide:250 x 250 mm Milling unit:2,000 rpm, 1,395 Nm Tool holder:SK 50 Nwjdpfsx Axyrox Aa Ejr Equipment: Tool magazine:40 stations Chip disposal:Chip conveyor Coolant supply:IKZ system Tool holders:Various tool holders

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! Nwodpfxjv Hm Nmj Aa Ejr • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever Nwedpju Ng Hbofx Aa Ejr *

Condition: used, machine/vehicle number: 6134, Vehicle number 6134 ----Defect Nwodpfekpmflox Aa Eor Hammer chisel is missing!! Errors & intermediate sale reserved

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters Nsdpfx Aajwpa Rus Eswr - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: new, Center length ----- 2000 mm Center height ----- 330 mm Turning diameter ----- 660 mm Main spindle passage ----- 105 mm Bed width ----- 405 mm Njdpfoga T Acjx Aa Eewr Spindle speed ----- 36-1600 rpm Motor ----- 7.5 KW HEAVY DUTY VERSION - WEIGHT 4080 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 rungs * 3 Chuck 325 mm * 400 mm chuck * 630 mm chuck * Fixed and moving glasses * LED work light and cooling system * Box with various tools

Condition: new, functionality: fully functional, Year of construction: 2022, Excavator weight: 4 ÷ 12 t Working weight of the hammer: 440 kg Usable diameter: 80 mm Optimum amount of oil required: 80 ÷ 70 (l/min) Oil possible 90 ÷ 60 (l/min) Optimum pressure set on the hammer 120 ÷ 125 bar Pressure possible 105 ÷ 130 bar Working pressure set on excavator 170 bar Back pressure max. 12 bar Energy per blow 950 joules Number of blows per minute 620 ÷ 1500 n/min incl. accessories: 1 head plate MS08, 1 pointed chisel, Nwjdpfxottv Ene Aa Esr 2 connection hoses

Condition: good (used), – KEMROC DMAW 130 Manufacturer: KEMROC Spezialmaschinen GmbH, Jetternstraße 4, 36433 Leimbach, Germany Made in Germany Model / Type DMAW 130 📅 Year of manufacture: 2021 🔢 Serial number: DMAW130100 ⚖ Weight (approx.): 2,100 kg ⚙ Max. operating pressure: 380 bar The KEMROC DMAW 130 is a hydraulic drum cutter attachment, mainly used for: • Concrete milling • Rock milling • Demolition work • Tunnel and pipeline construction • Surface profiling The DMAW series comprises heavy-duty drum cutters, suitable for large excavators. Technical specifications (general for DMAW series) (Note: estimated, as not all details are shown on the nameplate) • Recommended excavator class: approx. 18–30 tons • Hydraulic oil flow: approx. 150–250 l/min • Cutting performance: depending on material, approx. 10–25 m³/h • Tool type: chisels / picks Nwedpfx Aexzla Nsa Ejr

Condition: new, We are selling various Hilti suction drill bits from our remaining stock. Nwedpfxoxt Uflo Aa Ejr

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable tools. --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm Nwjdpfx Aaswwl Iuo Ejr --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: good (used), Year of construction: 1996, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel Nsdpfjqnvtzsx Aa Ejwr

Condition: new, Center length ----- 2000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 baffles * Rapid traverse X,Y Nwsdpfx Aega Tvpea Esr * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Fixture plate * Fixed and moving goggles * LED working light * Cooling system * Box with various tools

Condition: new, functionality: fully functional, power: 1.7 kW (2.31 HP), fuel type: gasoline, color: yellow, overall weight: 24 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Petrol Breaker BH 65* - NEW -! Weight: 24 kg, 2-stroke petrol engine WM 80c with 1.7 kW power, percussion rate 1,250 bpm. Other sizes available! Machine location: Warehouse D-46514 Schermbeck. *Transport trolley and chisels are shown for illustration purposes only and are not included in the scope of delivery. _____ Wacker Neuson BH 65 for sale | 2-Stroke Petrol Breaker | Wacker BH65 Demolition Hammer | Road Construction Petrol Breaker | Cordless Demolition Hammer | Handheld Petrol Breaker | Concrete Hammer for Constructions Sites | Wacker Hammer new | Buy Petrol Demolition Hammer | Cordless Site Hammer — Highlights & Advantages: ✔️ Autonomous demolition hammer – ideal for jobsites without electrical power supply ✔️ Compact & portable – only 24 kg weight ✔️ High impact rate with 1,250 blows/min ✔️ Low-maintenance WM 80 engine – designed for tough construction site conditions ✔️ Ready for use without compressor or electricity ✔️ Ergonomic & vibration-damped – operator-friendly ✔️ Made by Wacker Neuson – professional quality — Njdpfx Aaoxtu Aqe Eswr Typical applications: -Road construction / pavement repairs -Concrete and asphalt demolition -Civil engineering & pipeline construction -Fiber optic installation -Fence foundations, breakthroughs, minor demolition work -Landscaping & horticulture -Municipalities, construction yards, equipment rental companies

Condition: excellent (used), Year of construction: 2014, General information Field of application: Construction Reference number: 2 Weights Nwodpfsrr Tg Nex Aa Ejr Empty weight: 450 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 6,5 t - 13 t Reconditioned: Yes Delivery terms: EXW Working pressure: 100-150 bar Required hydraulic flow: 100 l/min Strike count: 550-1250 Latest inspection: 2024-03-01 Production country: DE Additional information Please contact Ö. Inalkac for more information Atlas Copco/ Epiroc SB452 general overhauled/GENERALÜBERHOLT top condition. This SB452 is with following NEW parts: seal kit, diaphragm, bushing, retainer pins, stop pin, control valve, chisel/tool, hoses and new painted. SB552, SB450, SB302

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Passage of main spindle ----- 38 mm Bed width ----- 203 mm Nwsdpfxsq E Iyzj Aa Eor Spindle speed ----- 45-1800 rpm Motor ----- 2.4 KW Weight ----- 880 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 200 mm * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: excellent (used), Year of construction: 2013, General information Field of application: Construction Weights Empty weight: 5.400 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 58 t - 100 t Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 390 l/min Strike count: 280-480 Latest inspection: 2025-03-03 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc HB5800DP from 2013. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. HB4700 HB4100 HB4200 HB3100 Nedpfsv Tm Sbox Aa Eewr

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Passage of main spindle ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 1750 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 attachments * Self-centering 3 chuck 250 mm * Independent 4 chuck 320 mm * chuck 350 mm * Fixed and moving grips * LED work light and cooling system Nsdpfjk Iug Tox Aa Ejwr * Electric brake (CE) * Foot brake * Box with various tools

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 2x0,7x0,6 Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Nodpfx Aevpq Tbja Eewr Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Main spindle passage ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 2220 kg INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 tines * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate Nwsdpfx Aaega Tv Ej Esr * Fixed and moving glasses * LED working light and cooling system * Electric brake * Foot brake * Box with various tools

Condition: new, WM180V - ROGI vario metal lathe 230V-1Phase Turning diameter above bed ----- 180 mm Turning diameter above cross support ----- 110 mm Center height ----- 90 mm Center distance ----- 300 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Nwjdpfoga T Ebox Aa Eor Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed glasses * Moving glasses * Fixture plate 170 mm * Support box * TOOA0 quick-change chisel holder * Rotating chisel set

Condition: new, WM210V - ROGI VARIO METAL DRESSING BENCH 230V-1Phase Turning diameter above bed ----- 210 mm Turning diameter above cross support ----- 110 mm Center height ----- 105 mm Center distance ----- 400 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 75 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box Nwedpjga Txcsfx Aa Esr OPTIONS * 4 Chuck 100 mm - independent * Flange for 4-jaw chuck 100 mm * Fixed glasses WM210V * Separate glasses WM210V * Clamping plate WM210V * Support box WM210V

Condition: new, Center length ----- 1500 mm Center height ----- 280 mm Nwodpsga Tvljfx Aa Eor Turning diameter ----- 560 mm Passage main spindle ----- 80 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 barrels * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Clamping plate * Fixed and moving glasses * LED work light * Cooling system * Box with various tools

Condition: new, Center length ----- 1000 mm Center height ----- 160 mm Turning diameter ----- 320 mm Passage of main spindle ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 KW Nwodpjrpn Uiefx Aa Ejr Weight ----- 560 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 160 mm * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: new, Center length ----- 700 mm Center height ----- 140 mm Spindle diameter ----- 280 mm Main spindle passage ----- 38 mm Bed width ----- 180 mm Spindle speed ----- variable 50-1800 rpm Frequency motor ----- 1.5 kW Including * DELTA frequency switch Njdpfega Tv Tox Aa Eowr OPTIONS * Support box * SINO 2-axis digital readout * Multifix quick-change chisel holder incl. 4 tappets TOOA1 * Fixed glasses * Meshing glasses * Chuck plate * 4 Chuck 160 mm