Used Chain Rotator for sale (9,020)

Condition: used, Year of construction: 2014, operating hours: 10,000 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating Hours: 10,030 h Weight: 26,300 kg Engine Manufacturer: Liebherr (short-tail) Engine Power: 120 kW Air Conditioning Iajdpfx Aewzq Iujfnsn Engine Type: D934S * Sales Consultant Information * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Input errors cannot be ruled out. * Please verify the equipment on site + input errors + subject to prior sale.

Condition: good (used), Door lock mortiser SL 100 Iasdpfx Afoygm Awsnen - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, 2 pieces electric chain hoists with travel motor Manufacturer: LIFTKET Type: K 3000 Year of manufacture: 2008 Chain hoists with fast and fine lifting, travel motor, with radio control, in very good condition. Lifting height: 3 meters Load capacity: 3000 kg. Ijdpfx Afexr Dw Uenoan

Condition: excellent (used), Crab unit by KONECRANES, type: CXT4410050P3M5FBLON, year 2002, including electrical diagram. Load capacity: 5000 kg, max lifting height: 6 m, with fast and fine lifting, and pendant control. In very good condition. Iedexiw Nrjpfx Afnean

Year of construction: 2015, condition: excellent (used), Electric chain hoist Fabr.ABUS Type:GM 4 500.6-2 Year.2015 Load capacity.500 KG Lifting height 3 meter. Iodpfxjiunb Rs Afnsan In good condition.

Condition: used, operating hours: 16,911 h, HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer line * Quick coupler * Cabin protection grid * Undercarriage approx. 70% Iaedpfxexw Apmj Afnen

Condition: used, Year of construction: 2007, operating hours: 19,679 h, KOMATSU PC 210 LCD-8 Iedpfxexw An Ne Afnsan Monoblock CRACKED !!!!! Engine and undercarriage OK * Year of manufacture: 2007 * Engine power: 110 kW * Weight: 22,260 kg

Condition: used, Year of construction: 2019, operating hours: 5,900 h, Tracked excavator CAT 308E2CR, year of manufacture 2019, approx. 5,900 operating hours. Very good condition. Isdpfxoxnvlco Afnjan

Condition: used, Year of construction: 2019, operating hours: 8,240 h, CAT 330 F Tracked Excavator Ijdpfx Afeyh Tp Rsnsan Only 8,240 operating hours Excellent condition Cat C7.1 engine, rated output approx. 195 kW / 261 HP, operating weight approx. 30,900 kg Travel speed approx. 5.3 km/h Digging depth up to 7.24 m Reach approx. 10.8 m Bucket capacity approx. 1.7 m³ Transport length approx. 10.4 m Transport height approx. 3.4 m Width (with 800 mm tracks) approx. 3.2 m

Year of construction: 2011, condition: good (used), 1 used, well-preserved welding rotators, tank turning rolls designed for a load of 300 tonnes, consisting of 1 driven unit 1 idler unit with the following technical data: Type : PR 3000 SB total load : 300t Load per unit : 150t Roller diameter/width : 850 x 250 mm; Roller material : steel Roller centre height : 778 mm from lower edge of machine frame Rotation speed : 65-1,230 mm/min continuously adjustable Support diameter : 1.000-9.000m electrics : switch cabinet permanently attached to the machine frame of the drive unit Control : wired remote control Supply voltage : 380/400 V, 3Ph, 50 Hz The system is also available for hire (trial hire) Iedpfx Ajfn Hmzefnjan

Year of construction: 2012, condition: good (used), 100t turning roll, rollerbed workpiece diameter 600mm-8.000mm Ijdpfx Askkbfcefnjan speed 80-1.200mm/min availible for renting

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, welding rotator for max. load 1t polyurethane wheels 50,0 mm x 200mmØ Iedjwuzc Aspfx Afnjan workpiece diameter 20 - 800 mm speed-range 80 - 1.600 mm/min foot-pedal availible also for renting

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm speed 130-1.250mm/min availible for renting Iajdpfx Afjmk Iktonjn

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 10,000 kg, Rent or purchase: 1 in-stock welding rotator designed for a load of 10 tonnes, consisting of: 1 driven unit 1 idler unit with the following technical data: Type : CZF 10V (made in france) Turning capacity drive unit : 10 to Load capacity drive unit : 5 to Load capacity per travelling unit : 5 to Drive : on both rollers in the driven unit Support diameter : 200 - 3,250 mm Track roller diameter : 300 mm Track roller width : 100 mm Track roller material : Polyurethane Rotation speed : infinitely variable from 120 - 2,200 mm/min electrics : switch cabinet mounted on the frame Supply voltage : 400V, 50 Hz, 3Ph Iodjwuy Svspfx Afnoan Control : wired manual control bulb, 5m cable The system is also available for hire (trial hire)

Condition: good (used), Year of construction: 2019, functionality: fully functional, turning roll, roller bed for400t max. load and workpiece diameter 1.000-9.000mm. Steel-wheels. Consisting of 1x drive unit, 1x idler unit and 4x fit-up units (hydraulic) availible also for renting Iajdeuf R Ilspfx Afnjn

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drive pinion: 10 teeth Chain sprocket: 10 teeth Carrier width: 30 mm Chain link length: 130 mm MACHINE DETAILS Ijdjyf Aypspfx Afnsan Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Condition: used, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 17,550 mm, total length: 7,400 mm, · Kippwinkel 10 ° · Schüttwinkel 107 ° · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Crab Modus · Stützentyp: Flügeltyp · Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig · Hersteller: Deutz · Motornorm: Stage V / Stufe 4 Iodpfoyhrfmox Afnean · Motor Modell: TCD 3.6 L4 · Nennleistung Verbrennungsmotor / Leistung (kW): 55.92 kW / 55.40 kW · Max. Drehmoment / Engine rotation (min): 405 Nm @ 1300 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 4 - 3620 cm³ · Kühlsystem des Motors: Wasserkühlung · Anzahl Batterien / Batterie / Batteriekapazität: 2 x 12 V / 120 Ah · Battery starting current: (EN)850 A · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 2 · Max. travel speed: 25 km/h · Zugkraft: 9400 daN · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 44.50 % / 44.50 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge: 116 l/min · Hydraulikdruck: 275 bar · Motoröl: 11 l · Hydrauliköl: 144 l · Fassungsvermögen des Kraftstofftanks: 130 l · Lärm und Vibrationen: Geräuschpegel im Fahrerstand (LpA): 68 dB · Außenschallpegel (LwA): 106 dB · Vibrationswert an Händen/Armen: < 2.50 m/s² · Diverse Lenkräder (vorne / hinten): 2 / 2 · Steuerungen: 2 Joysticks · Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) standard

Condition: used, load capacity: 8,000 kg, lifting height: 51,000 mm, total length: 10,210 mm, Rotating forklift Magni RTH 8.51 Iajdpfx Asyhrfgofnjn Drive Diesel Lifting height (mm) 51,000 Lifting weight (kg) 8,000

Condition: used, Year of construction: 2011, operating hours: 14,246 h, Equipment: all wheel drive, LIEBHERR R 934 C with laser system, tracked excavator Color: Beige The excavator is equipped with a laser system. The excavator calculates cubic meters (m³) via laser. 80% undercarriage remaining + Condition like new + with Quickoil system + hammer-piping (hammer-ready) + Service performed by Liebherr + 1x bucket BGR 500 CHAPTER 2:12 – inspected until 07/2026 We are also happy to support you with financing/leasing options in cooperation with our partners. Iajdsxir N Hepfx Afnjn All information provided without guarantee. Subject to errors and prior sale.

Year of construction: 1981, condition: used, Filling machine Manufacturer: Engler Type: automatic 24 head open piston filler Model: Schume 24 Capacity: +/- 9,000 pieces per hour Filling volume: up to 800 ml Dimensions: L x W x H = 3.400 x 1.800 x 2.400 mm Weight: 700 kg Power supply: 380 Volt – 50 Hz – 1.1 kW Other: infeed product hopper with twin screw Tooling: 720 ml jars with TO-082 as-is Iasdpfxeiby Rmj Afnen or adjusted to customer needs

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Iaodpfx Asykudksfnjn F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Iasdpfoykubisx Afnen Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone: ...). Magni Rotating Work Basket / Tree Care Basket / 250 kg / Suitable for RTH & TH Series / NEW Price: €5,990.00 net / €5,938.10 gross Iodpfx Afoykhupenean - Max. load capacity: 250 kg - Width: 670 mm - Length: 1,400 mm - Rotation range: +/- 90° - Max. occupants: 2 - Automatic attachment recognition: yes - Rotating work basket, rotation range +/- 90° - Galvanized, reinforced steel construction - Non-slip floor for safe working at height - Remote control is required for basket operation and must be installed on the machine side This attachment is suitable for the RTH and TH series. Product code: ATT-01-003 We have many other Magni attachments available from stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. On request, we will also be pleased to prepare a financing offer for you. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range! Errors and interim sale excepted. = More information = Condition: New Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone: [number]). DMS SG22090 Sorting Grab / including rotator / brand new / in stock & immediately available / including bolt-on teeth Price: €18,590.00 net / €22,122.10 gross - Shell width: 900 mm - Capacity: 542 l - Weight (without rotator): 897 kg - Rotator weight: 168 kg - Operating pressure: 320 bar - Closing force: 52 kN - Torque: 4,200 Nm - Opening width: 1,900 mm - Excavator class: 17 - 22 t Optional: - Softgrip XL Set: €3,120.00 net - MS10 adaptor plate: €2,645.00 net - MS21 adaptor plate: €3,185.00 net Iodpfx Ajykhtlefnoan - OilQuick OQ 70/55 adaptor plate (currently installed): €5,790.00 net We have many more DMS grabs in stock and available for immediate delivery! Mr. Herden ([phone number]) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official distribution and service partner for the following brands: - Westtech - Magni Telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = More information = Intended use: Construction Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodgripper WG 1720 / RTW28 Rotator / NEW UNIT / In stock & immediately available - Maximum grab opening (mm): 1,720 - Own weight (basic – fully equipped) (kg): 690 – 930 - Recommended oil flow (l/min): 60 – 190 - Recommended operating pressure (bar): 100 – 300 Iaodpfjykhtfjx Afnjn - Carrier vehicle operating weight, rigid (t): 15 – 28 - Carrier vehicle operating weight, articulated (t): 15 – 60 Equipment: - incl. RTW28 Rotator We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.), available immediately. Our warehouse offers a wide range of Westtech products, all available for immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Financing options available upon request. We are an official distribution and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Subject to errors and prior sale! = More information = Application: Construction Contact: Marius Herden for further details.