Used Cast Angle Plates for sale (16,882)

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: As-new PLANOLITH surface plate, DIN 876/1 Nodpfxjy E Nc Ee Aaaola Year of manufacture: 20020 With original stand Dimensions: 1500 x 1000 x 400 mm Weight: 1100 kg Price: EUR 1,250 plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1985, Immediately available ex location: Three-roll plate bending machine MD Durst Model RWASV 2505 Year of manufacture: 1985 Bending length: 2,550 mm Material thickness: up to 5 mm Njdpey E I Imefx Aaaola Automatic pre-bending Drive: 7.5 kW Weight: 4,600 kg Price: EUR 4,750 plus VAT, ex location

Condition: new, Year of construction: 2018, Automatic angle welding machine Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm 16426ä Njdswriuujpfx Aaaola

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Model: AWS-C 9070 CS Year of manufacture: 2018 Nljdpfx Astzcd Soaasa Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operating side: Left in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / Conveyor belt height infeed-outfeed: approx. 860 mm +100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Supply voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 16426ä

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Nsdpsyyc A Uofx Aaasla Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: refurbished (used), K+G Weather angle grinder 114 Motor power 12 kW, 28 a Nledpfx Aonp Hqdjaaja stainless steel with feed ring screw, 2 speeds weight:615 kg Machine size 70x100x128cm Of course it is possible to visit the machine by appointment. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, Year of construction: 1997, machine/vehicle number: 3104, Offer 25503 Technical specifications: - Manual operation + CNC-controlled operation - Max. working width: 1740 mm - Max. material thickness at 40 kg strength per mm²: 0.50 mm - Roller diameter: 90 mm - All 4 rollers are motor-driven - Working speed up to 10.5 m/min Nljdpfsy E Ipkex Aaaja - Folding bearing - Pivoting control panel with CNC control - Electric foot switch - Drive: 400 V / 0.75 kW - Required footprint (approx.): W 2000 x H 1250 x D 850 mm - Weight (approx.): 850 kg

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Nedpfsyrt Absx Aaajla Number of cylinders 6 St. down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.

Condition: good (used), functionality: fully functional, Year of construction: 2007, ADVAND Grafoteam PST26 plate stacker, 2007 Nodpfx Aeu Hl Hheaaela cleaned and tested ADVAND Grafoteam PST36 plate stacker, 2005 cleaned and tested ADVAND Grafoteam PST36 plate stacker, 2008 cleaned and tested ADVAND Grafoteam MDT26C Conveyor, 2005 cleaned and tested All offers subject to prior sale

Condition: excellent (used), Year of construction: 1995, Various scribing and straightening plates, different sizes: 2000x7000x300 mm 1500x3000x205 mm 1500x3000x255 mm 2000x4000x100 mm 2000x4000x150 mm 2320x4675x460 mm 2400x4000x400 mm 2000x3000x300 mm 1500x3005x260 mm 2000x7000x300 mm 150x6000x210 mm 1500x3000x200 mm 1500x3000x200 mm 1500x3010x200 mm 1000x2000x150 mm Nsdpfx Asyh A Aaeaaela Available individually.

Condition: good (used), Marking-out and straightening plates in various sizes and designs, with or without slots, with subframe or legs Nedpfsxcf Eusx Aaaola

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Nljdpfx Aaeww I Tmjaoa

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Nlodpfx Aaerfwyrsasa

Condition: good (used), Year of construction: 1969, Hämmerle guillotine shear type AS 10, 4000x10 mm Njdexmkf Uepfx Aaaola

Condition: good (used), Year of construction: 2000, Measuring and granite plate, manuf. Oelze, 1000x1500 x 220 mm, with base frame Nsdpfx Aoxxzp Ueaaola

Condition: good (used), Marking, straightening, and welding plate, cast iron + steel 1 x 4000x7000x300 mm Njdpfxjxmkfbo Aaasla 1x 1500x3000x205 mm 1 x 1500x3000x255 mm 1x 2000x4000x100 mm 1x 2000x4000x150 mm 1x 2000x1500x300 mm

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Nodpekwcc Nefx Aaajla Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Nsdskvm Szepfx Aaaola Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Nlodskvm S Nspfx Aaasa Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, sheet width 3050 mm plate thickness 10 mm cutting angle 1-4 ° back stop - adjustable 10 - 1000 mm 13 Stück 25 mm Nodpfxsy Dh Nue Aaasla 60 mm quantity of oil 240 l 24 1/min. total power requirement 15 kW weight of the machine ca. 6300 kg dimensions of the machine ca. 4100x3800x2000 mm

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, Nedpsyx Atwefx Aaaola -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 605 x 450 mm -Inner diameter: 180 mm -Plate height: 97 mm -Groove width: 18 mm -Dimensions: see drawing in the photos -Dimensions: 605/450/H97 mm -Weight: 183 kg

Condition: used, Year of construction: 1992, Technical details: sheet width: 3050 mm Nljdpey A Rnqefx Aaaja plate thickness: 8 - 16 mm distance between columns: 4800 mm control for program: CNC back gauge: max. 1000 mm cutting angle: 0,5 -3,0 ° down holder: 18 Stück Total power requirement: 30 kW height over floor: 2550 mm weight of the machine ca.: 14 t dimensions of machine: 4,8 x 2,3 x 2,6 m

Condition: used, Druckplattenstanze für Heidelberg SM52 - Plate Punch NELA for Heidelberg SM52 Druckplattenstanze / Plate Punch NELA SM 52 Baujahr / Year 2003 - Serial-No. 5302/40 Druckplattenstanze für Heidelberg SM52 Plate Punch for Heidelberg SM52 Nlodoy Apxbspfx Aaasa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Nledpjyxx D Sefx Aaaja Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Nlsdpfxey E Tyns Aaaoa Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn