Used Cardboard Dishes for sale (1,207)

Condition: good (used), Year of construction: 2013, functionality: fully functional, Dixi 60 SLS Baler, Year of Manufacture 2013 Technical Data: Manufacturer: Dixi Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Foil The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Ncsdoy Ni Hxopfx Amnot If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer’s information. We do not accept liability for the accuracy or possible errors in the details provided. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by arrangement. Sale is ex works, against advance payment, without warranty or guarantee.

Year of construction: 2014, condition: good (used), functionality: fully functional, High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 special Year of construction: 2014 Volume: 4.72 m³/s Max. temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Ncedpey Tid Ejfx Amnot Speed: 2900 rpm Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is intended for transporting paper/cardboard. The material is also chopped up. The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewings, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refer to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel Njdey Nkdxspfx Amnsct nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: ready for operation (used), Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure. Njdpexz Niuefx Amnjct

Condition: good (used), Iijima’s excellent, high-speed JF-1030, manufactured in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Ncodjx Ndu Depfx Amnot Die-cutting unit adapted to be compatible with/for Bobst die-cutting blades and mounting strips. Sector segment driven by a dual set of bevel gears instead of the previous triple system. Smoother and vibration-free, improved operation of the gripper carriages. Chains renewed in May 2023. Gripper carriages have been repaired where necessary, but not replaced; current tolerance on front registration for rigid cardboard types < 0.15 mm. Engagement clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all rolling bearings on this shaft, including those in the oil casing just before and after the worm gear. Oil seals replaced. Oil casings flushed and thoroughly cleaned in preparation for conversion from mineral oil to full synthetic oil. Absolutely no foaming, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be supplied including installation, transport, and warranty. Other specifications as per the factory brochure. Technical Specifications – Flatbed Die Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout ⸻ Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm ⸻ Performance • Maximum cutting pressure: when running max. sheet size • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable • Normal cutting rule height: 8 – 12 mm ⸻ Pile Data Feeder pile • Height (incl. pallet): 1,200 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,080 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg ⸻ Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg ⸻ Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min ⸻ Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Njdpfxsy R Npce Amnsct Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Ncjdpfxjxhfpke Amnjt Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: Ncsdpfx Amsymaz Hjnst 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Njdpfoxtndnjx Amnect Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, Year of construction: 2017, The Zechini ESB 500 is a high-performance automatic box wrapping machine engineered for the efficient production of premium rigid boxes. Designed to meet the exacting standards of luxury packaging industries, this machine ensures consistent quality, precision finishing, and streamlined workflow. The ESB 500 automatically covers pre-assembled cardboard cores by precisely folding, tucking, and overlapping wrapping materials onto the box structure, delivering a flawless external finish. Technical specifications: Box Height : 20 – 150 mm Box Width : 95 – 450 mm Box Length : 95 – 500 mm Board Thickness : 1,2 – 3 mm Max. Mechanical Speed : 400 cycles/h. Zechini Roby Junior 2 Casemaker Nedey I Rnbspfx Amnsct Roby Junior 2 is compact and versatile semi-automatized case maker suitable both for short and medium runs and can produce a gluing unit integrated in the machine in order to save floor space and the walking effort. Usually used with hot, animal glue, the unit can also be used with cold, vinyl glue. Technical specifications: Max. Board Size : 500 x 700 mm Min. Board Size : 140 x 140 mm Max. Cover Material Size : 540 x 740 mm Board Thickness : 1,5 – 3 mm Max. Mechanical Speed : 250 cycles/h. Zechini CT 150 Corner Tape Machine The CT 150 is the machine to close the corners of the box by positioning heat-sealing stripes. The machine places the heat-sealing adhesive onto the corners to form the box. Technical specifications: Max. Box Height : 150 mm Min Box Size (L x W x H) : 60 x 60 x 10 mm Max. tape Width : 22 mm Max. Mechanical Speed : 300 cycles/h.

Condition: good (used), Year of construction: 1992, functionality: fully functional, ▪ Core diam.outside: max. 250mm ▪ Core diam.inside: max. 200mm ▪ Core length (input): max. 5000mm ▪ Cutting length: 100 – 2500mm Nsdpfx Aey Tk Sqemnjct Complete core cutting installation, including dust collection unit.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, overall weight: 43,000 kg, warranty duration: 6 months, pressure: 280 bar, oil tank capacity: 2,450 l, power: 110 kW (149.56 HP), year of last overhaul: 2026, This Impress D130-A-110 kW press is in new condition and has been completely refurbished. The press has been completely rebuilt, with almost all parts replaced by new components. Only the frame and some mechanical parts are still part of the original assembly. Ncsdpfxsy Tm H Re Amnet The main cylinder has been completely overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control panel is also completely new, ensuring maximum reliability, safety, and operational certainty. The standard configuration of this machine features horizontal strapping. Thanks to the prepared frame, this press can also be supplied with both horizontal and vertical strapping, making the machine flexible for use with various material flows. Applications: Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. As you have come to expect from BOA, this used machine can also be supplied with technical support, parts supply, and expert advice.

Condition: used, Year of construction: 1993, Technical details: Ncjdpfx Asu Nu Hijmnot mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: used, Year of construction: 2011, functionality: fully functional, Strautmann EK700 Basic paper press, film press Used, in good condition, fully functional, low operating hours, Ncedpjy Tvagofx Amnst year of manufacture: 2011 Power connection: 230 V New price: listed for €9,500 Compression cylinder disassembled for transport. Inspection possible by appointment. 20 additional presses in stock.

Condition: used, maximum load weight: 28,350 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2011, Year of construction: 2011, Approx. 22,500 litre capacity, single-compartment, V2A stainless steel design. 10 t fifth wheel load, 3 x 9 t axle unit. Tank code according to ADR 2009: L4BH. Specification: Cylindrical, self-supporting tank, diameter 1,800 mm, made from V2A stainless steel. Tank internal surface ground smooth to 2B finish. The tank is single-compartment, fitted with 2 baffle walls. The end plates are designed as dished ends. Operating parameters: Operating overpressure 2.67 bar. Test pressure 4 bar. Vacuum resistance -0.21 bar. Operating temperature 50°C. 3 manholes DN 500 with hinged dome covers, each with 6 toggle fasteners. 1 continuous stainless steel overflow box, rubberised to the upper edge. Plastic drainpipes run from the overflow box to the bottom edge of the tank. The drainpipes are equipped with plastic ball valves and plastic hoses. Tank internal rubber lining: The tank is lined internally with HAW W08 rubber lining. Material outlet: At the bottom, a pneumatically operated, coated bottom hatch DN 80, brand Ebro, is fitted. The rubber-lined material outlet is routed to the rear right, equipped with a DN 80 butterfly valve, TW-MK coupling, and a blanking cap. Blow-out device for complete hose emptying provided. Ncjdpfx Amjy A U Dpsnet Dome fittings: The following fittings are mounted in the dome sump: 1 compressed air connection 2" with 2" shut-off valve. 1 pressure relief 2" with 2” shut-off valve and pipe bend. 1 vacuum valve, brand Hasteloy, with response pressure -0.21 bar. 2 flanges DN 50 with blind flanges for retrofitting a safety valve (required only for transporting hypochlorites). At the rear of the dome sump, a DN 80 flange with blind flange for retrofitting a top discharge is fitted. Compressed air fittings: A 2” plastic compressed air line made of PVDF is routed upwards into the tank. Compressed air system: Lower right. Equipped with pressure gauge, safety valve, non-return valve, and pressure relief/gas rocking connection TW 50. Compressed air connection TW VK 50 with blanking cap. Walkway: On the top left side, a full-length aluminium open grid walkway, width 400 mm, with a stainless steel safety folding guardrail (can be raised from below) and a stainless steel handrail. Rear left, a stainless steel access ladder installed. All tank supports for chassis, fifth wheel plate and landing gear made from electropolished stainless steel. Running gear: Axle unit, brand BPW type ECO, 3 x 9 t disc brakes, Ø 430 mm. The air-suspended, rigid axle unit is mounted in FFB stainless steel suspension brackets. Axle spacing 2 x 1310 mm. A pneumatic raise/lower valve is fitted on a control panel ahead of the first axle on the vehicle. One lift axle, driver-controlled from the cab, with traction aid (up to 30 km/h). Brake system: 2-sensor, 2-module ABS/EBS air brake system with spring-loaded brake cylinders on two axles. Axle load display via CAN bus in the tractor unit display. Tyres: 6 tyres, brand Michelin, size 385/65 R22.5 provided. Rims: Forged aluminium rims, brand Alcoa, type Dura Bright, size 22.5 x 11.75, offset: 0 mm, wheel bolt holes: 26 mm. ADR equipment: Includes: 1 fire extinguisher (6 kg) with holder and protective cover, 1 set of warning signs in compliance with legal regulations, earthing lugs, 1 ground drag, 1 earthing cable reel. Equipment: Electrical installation 24 volt.

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm Ncjdpoud U Sfofx Amnst net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Ncodpfxsu H R Iqo Amnet Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: new, Unused Joshua Greaves stainless steel vertical process vessel. Approximately 1,000 litre working capacity. Unit has bolted dished top and welded dished bottom. Internal rated atmospheric design pressure at 80 deg.c. Stainless steel external jacket rated 3.5 bar design pressure at 80 deg.C. Unit has a top mounted anchor agitator driven by a 1.5kW, 1461rpm motor and off-set general purpose high shear agitator driven by a 7.5kW, 2890rpm motor. Unit includes (1) ICS Cool Energy iC 220 50Hz water chiller and (1) ICS Cool Energy i-Temp ci 90t9 50Hz water chiller . Unit also includes an Alfa Laval rotary lobe feed pump. Unit is mounted on (4) stainless steel legs. Njdpfx Amoyx Ibmonsct

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Njdod H R Sxopfx Amnsct Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Ncjdpfx Aod Db N Ijmnst Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Ncodpfsxqf U Sex Amnet Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed Ncodpfx Amey Ex Nnonjt mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, Year of construction: 1999, operating hours: 1,200 h, filling opening width: 1,000 mm, filling opening length: 1,250 mm, No. 04531 Four-shaft shredder WEIMA ZM 30 Used, year of construction 1999, approx. 1200 operating hours, machine in very good condition The four-shaft shredder is designed for bulky and very long wood waste, such as boards, pallets, packaging materials and cardboard of all kinds. Various plastics can also be shredded with this machine. The wood chips produced can be used directly for heating. Special secondary crushers excessively long chips. Hopper opening 1250 x 1000 mm LW Cutting unit width 462 mm Cutting unit length 562 mm Cutting disc diameter 235 mm Speed approx. 25 rpm 2 motors, each 7.5 kW Nsdpfsy Tpg Tjx Amnjct Throughput capacity between 350 - 1250 kilograms per hour (depending on material and screen hole diameter) Fuse protection 50 / 63 A Extraction connection diameter 200 mm GS-tested, CE-compliant The cutting tools can be sharpened using an angle grinder and round grinder (see operating manual). The entire cutting unit can be replaced. Incl. technical documentation Incl. electrical connection cable with plug Transport dimensions approx. 1450 x 1250 x 2150 mm LWH Weight approx. 1300 kg To avoid any misunderstandings, an on-site inspection by prior appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or dispatch Delivery terms: Ex warehouse

Condition: excellent (used), mileage: 355,192 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 6x6, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, trailer coupling, = Additional options and accessories = - Disc brakes - Gullet - Hub Reduction - Power take-off (PTO) - PTO - Radio/CD player - Rear view camera - Speed limiter - Tipping hydraulics Ncedpfxsy Rfy Rs Amnjt = Remarks = Structure Dish height: 115 cm = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Number of cylinders: 6 Tipper: Back Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 355,192 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, trailer coupling, = Additional options and accessories = - Disc brakes - Gullet - Hub Reduction - Power take-off (PTO) - PTO - Radio/CD player - Rear view camera - Speed limiter - Tipping hydraulics = Remarks = Structure Dish height: 115 cm = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Number of cylinders: 6 Tipper: Back Technical condition: very good Visual appearance: very good = Dealer information = Njdey Rfx Tjpfx Amnsct Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A