Used Bag Opener for sale (10,561)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. Psdeyizxrspfx Ampegk All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Bag opener, for opening bags such as "yellow bags", etc. Can be used as a stand-alone device or as a system component in e.g. a sorting system. Throughput capacity: 6-7to/h Drive power: approx. 18kW dimensions: 8000x2350x2700mm Weight: 11t Order goods Delivery time approx. 30 weeks Pgododxwlzopfx Ampsk further data and offer on request.

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight Pjdpfx Amji El Hropjgk • The process is managed via color Touch-screen, multilingual Menu. • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Pjdpoyq Tb Ijfx Ampogk Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Pgedpfeyzzr Rsx Ampjk Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Pgjdpfxjv Dm Epe Ampsk Stainless Steel 230 Volt Power Supply

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Pgjdpov Dm Dlofx Ampjk Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel Podpfsyr Awbex Ampegk The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, bag dust filter Bag dust filter tower 4kw 9 bag extractor 3200m3/h 9 bag dust filter extractor in excellent condition for sale. radial fan: Filli ferrari 4kw 9 pieces of EMTEX textile dust filter bags, 250mm x 1650mm/pc Outlet diameter: 600mm Psdpfxoydp Nue Ampjgk Inlet diameter: 260mm built-in vibratory shaker. 0.18kw. structure: galvanized steel casing, steel frame. height: 3800mm width: 1150mm

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021201. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Pgedpfx Ajy Hlvwsmpek Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Pgodpey Hlkbofx Ampjk Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Pgedjx Utd Eopfx Ampjk Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan Podey Exfvjpfx Ampjgk 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) 1 x Checkweigher *Lots of videos available*

Condition: like new (used), Year of construction: 2022, Bag-in-box single head filler. The operator inserts the empty bag into the spout holder and activates the filling sequence. The system locks the bag in place, removes the cap and inserts the product valve. Any residual air is removed by the vacuum and the product flow begins by means of integrated pump. When the bag is filled to the desired volume, the product flow is shut off, nitrogen can be puffed, the bag is recapped and the operator takes the filled bag from the holder. Pgjdey Am Hispfx Ampjk

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Podpfxju Tg I De Ampogk Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, mileage: 243,678 km, power: 213 kW (289.60 HP), first registration: 05/2011, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,850 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: air conditioning, crane, electric window regulation, spoiler, trailer coupling, Technical information Number of cylinders: 6 Drivetrain Drive: Wheel Make of engine: Mercedes-Benz Axle configuration Tyre size: 315/70R22,5 Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 15.100 kg Carrying capacity: 10.900 kg GVW: 26.000 kg Functional Pgjdswv Rgmjpfx Ampjk Mast: telescopic (4 parts) Make of bodywork: EFFER 250/4S = Additional options and accessories = - PTO - Roof spoiler - Spare wheel

Condition: good (used), mileage: 125,700 km, power: 103 kW (140.04 HP), first registration: 07/2020, fuel type: diesel, wheelbase: 43,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 7, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Reversing camera - Radio and audio system - Disc brakes Pgjdpfxoy Huruj Ampek = Special features = W1V9072351N093272 = More information = Number of cylinders: 4 Engine displacement: 2,143 cc GVW: 3,500 kg Max. towing capacity: 2,800 kg (unbraked 750 kg) MOT: valid until July 2026 Technical condition: good Visual condition: good

Condition: good (used), mileage: 148,200 km, power: 103 kW (140.04 HP), first registration: 06/2020, fuel type: diesel, wheelbase: 43,250 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, Year of construction: 2020, Equipment: ABS, central locking, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Radio and audio system - Disc brakes Pgsdpfoy Hurnex Ampok = Remarks = W1V9072351N089031 = More information = Number of cylinders: 4 Engine displacement: 2,143 cc Unladen weight: 2,600 kg Payload: 805 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) MOT: valid until June 2026 Technical condition: good Optical condition: good

Condition: good (used), mileage: 78,300 km, power: 103 kW (140.04 HP), first registration: 05/2022, fuel type: diesel, wheelbase: 43,250 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, Year of construction: 2022, Equipment: ABS, central locking, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Radio and audio system - Disc brakes = Special features = W1V9072351N163308 = More information = Number of cylinders: 4 Pjdpfx Aey Hunismpsgk Engine capacity: 2,143 cc Unladen weight: 2,390 kg Payload: 1,035 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,800 kg (unbraked 750 kg) Technical condition: good Optical condition: good

Condition: used, empty load weight: 6,858 kg, maximum load weight: 31,142 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 103 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2015, Equipment: ABS, Tare weight: 6,858 kg, GVW: 38,000 kg, Loading area (L W H): 13,620 mm x 2,480 mm x 3,050 mm. Tyre size: 385/55 R22.5, Loading area volume: 103 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, rear underrun protection, Electronic Brake System (EBS), toolbox, ferry lashings, 1x15 and 2x7 pin plugs, antispray, lifting roof. Please find an overview of all available vehicles on our website. Finance required? We offer individual financing solutions, full-service contracts, and telematics services. We would be glad to advise you personally. Pgsdpey Eik Aofx Ampjk

Condition: used, empty load weight: 6,835 kg, maximum load weight: 31,165 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 103 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2015, Equipment: ABS, Tare weight: 6,835 kg, GVW: 38,000 kg, Loading area (L x W x H): 13,620 mm x 2,480 mm x 3,050 mm, Tyre size: 385/55 R22.5, Loading area volume: 103 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun protection, Electronic Brake System (EBS), Fire extinguisher holder, Toolbox, Ferry lashings, Roof rolling tarpaulin, 1x15 and 2x7-pin connectors, Antispray system, Lifting roof. Please find an overview of all available vehicles on our website. Finance required? We offer individual financing solutions, full service contracts, and telematics services. We would be glad to advise you personally. Pgodpfxsy Eikve Ampok

Condition: used, empty load weight: 6,799 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, suspension: air, tire size: 385/55 R22,5, color: silver, Year of construction: 2018, mileage: 641,750 km, Equipment: ABS, Unladen weight: 6,799 kg, Gross vehicle weight: 38,000 kg, Load securing with certificate, Cargo space (L x W x H): 13,620 mm x 2,480 mm x 2,750 mm. Tyre size: 385/55 R22.5, DIN EN 12642 (code XL) certificate, Cargo space volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underrun protection, Electronic braking system (EBS), Sliding roof, 1x15 and 2x7 pin connector, Anti-spray device, Brake disc 1st axle remaining 44 mm, pad wear 10%, Brake disc 2nd axle remaining 44 mm, pad wear 10%, Brake disc 3rd axle remaining 44 mm, pad wear 10%. MOT: -, An overview of all our available vehicles can be found on our website. Need financing? We offer tailored financial solutions as well as full-service or technical services — we’re happy to give you personal advice. Pgjdeyf S H Sjpfx Ampek

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/1993, total length: 13,600 mm, total width: 2,500 mm, total height: 2,850 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,810 mm, color: red, Year of construction: 1993, General information Model code: ## Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 7.600 kg Pjdpsy Hvlcsfx Ampogk Carrying capacity: 31.400 kg GVW: 39.000 kg Functional Make of bodywork: Groenewegen Huifzeil / Plateau Maintenance APK (MOT): tested until 07/2026 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, first registration: 02/2006, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 1,620 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,320 mm, Year of construction: 2006, Tyre size: 385/65R22,5 Suspension: air suspension Pgjdpfxjy Ewvme Ampsk Drive: Wheel Empty weight: 6.140 kg Carrying capacity: 32.860 kg GVW: 39.000 kg Make of bodywork: KRONE

Condition: used, A batch of 14 plastic Euronorm stacking bins. A robust and versatile solution for storing, sorting, and transporting goods in professional logistics environments. Pedpfeyccxyox Ampegk With standard Euronorm dimensions of 800 x 600 mm and a generous 122-liter capacity, the bin fits perfectly on pallets, racks, and transport systems that comply with