Used Cantilever for sale (202)

Condition: like new (used), Year of construction: 2020, operating hours: 4 h, Jungheinrich pedestrian stacker COMPACT AND MANEUVERABLE As a cantilever pedestrian stacker, the Jungheinrich EJG is always used where no wheel-arm supported trucks can be used, where no wheel-arm supported forklift trucks can be used (e.g. for picking up pallets crosswise, special loading aids, use of racks with impact protection). With an overall width of only 910 mm and high maneuverability, the truck can also be used in narrow storage areas. Manufacturer: Jungheinrich Type: EJG 112 Year of construction: 2020 Drive type: Electric Load capacity: 1,200 kg Lifting height: 2.500 Load center of gravity: 500 mm Dead weight: 2,175 kg Basic dimensions: Overall height: 1,880 mm Fork length: 1,150 mm Performance data: Motor:24 V electric Engine power:1.6 kW Battery:24 / 375 V/Ah Charger:24 V Power transmission: Pulse control Steering: Drawbar steering Year of construction 2020 Type: EJG 112 Itedpfonp Hzkox Aacjn Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Isdpfx Aaju N Hdajcjtn

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C Itodpowx H R Tsfx Aacsn EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: used, mileage: 460,839 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, overall weight: 7,490 kg, first registration: 10/2014, next inspection (TÜV): 01/2026, emission class: euro6, color: white, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 818 4x2 BDF Chassis VIN: L887470 -WAB can be purchased separately- Chassis / Attachments: Itedpfx Aow I Ilceacen * Wheelbase: 4,820 mm * Leaf/air suspension * Tires: 215/75 R17.5 * Remaining tread: Front approx. 30% / Rear approx. 90% * Plastic diesel tank, plastic AdBlue tank Cab: * Classic Space S * 3-seater * Roof hatch * Air conditioning * CD radio Body: * Biberach bodywork factory BDF system * Lifting cantilevers Engine / Transmission: * 177 HP / 130 kW // 5,132 cc // EURO 6 * Engine brake * Automatic * Differential lock Weights: * Gross weight: 7,490 kg * Curb weight: 4,330 kg * Payload: 3,160 kg Miscellaneous: * 1 previous owner * Roadworthiness inspection (TÜV) until 01/2026 * German vehicle ---- New general inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you with obtaining export/transfer license plates and can arrange the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in selling new and used commercial vehicles. On an area of 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, so we offer an excellent all-round service package and provide you with a competent contact person to assist you with the purchase or sale of vehicles. See for yourself! Our Services for You: Vehicle loading We are happy to assist with loading your purchased vehicles. Organizing special transport We are happy to help you organize special transports. Temporary / Export License Plates We are happy to assist in obtaining export or short-term license plates. Handling customs formalities We are happy to help you with customs matters.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with accessories and tool cabinet in very good condition!! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping range: >> Clamping surface of the tool carriage: 500 x 180mm >> Max. tool diameter between centers: 130mm >> Max. tool diameter with cantilevered mounting in the universal dividing head: 620mm >> Max. tool length between centers: 270mm >> T-slot base of machine: 12mm >> T-slots grinding head, tool carriage, and accessories: 8mm Range of movement: >> Travel distances Grinding stroke: 190mm Grinding stroke for helical grinding: 190mm Cross adjustment of tool carriage: 100mm Vertical adjustment of grinding head: 325mm Longitudinal adjustment of grinding spindle: 5mm >> Coarse adjustment distances Tool holder: 220mm Grinding head support: 800mm Universal dividing head on tool carriage: 330mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding spindle: Three-phase drive motor: 1.1KW at 2800 RPM Spindle speeds, stepless: 2000 to 10000 RPM Max. grinding wheel diameter: 125mm Max. cut-off wheel diameter: 200mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760mm Itodpfxjwrnavs Aacon Space required (including operation): 2.5 x 2.3 m Accessories and equipment: 1 pc. tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine from the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground surprisingly quickly, economically, and flexibly, all with the highest operating comfort. The Deckel S11 is in very good condition and is equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine on site under power.

Condition: good (used), Year of construction: 2001, product width (max.): 1,400 mm, Web width: 1400mm Unwind diameter: 800mm Rewind diameter: 500mm Maximum speed: 300m/min Integral unwind station with 76mm and 152mm air shafts Hydraulic roll lift and disc brake on unwind BST CLS Pro web guide unit for edge and line guiding Tension control via load cell mounted we path roller Infeed driven nip unit 3 motor dc drive system with analogue drive control Razor in grooved roller slitting station with several knife holders Isdpforzu U Ijx Aacetn Edge trim removal fan Duplex cantilevered rewind with differential slip adapters Full width lay on roll assemblies with pneumatic application Side opening door for roll off loading with guard inter locks Off loading roll capstan unit Control panel with digital display and digital counter Electrical diagrams

Condition: used, Cantilever racking, heavy duty racking consisting of: -Shelf: with 2 stands each -Support arms: double-sided -6x ledger depths: 900/500/400/300/230 mm -welded Itsdpfx Aod Eqlpjacjn -Also: other quantities and heights available on request -Number: 1x shelves available -Transport dimensions: 2100/2020/H2170 mm -Own weight: 430 kg/piece

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software Itodpfx Aji Apfzeacsn 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Itsdovmwxxepfx Aacon Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions. Itodemqf Nfepfx Aacsn

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: Ijdpswu Dwpefx Aacjtn x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, functionality: fully functional, load capacity per storage section: 14,000 kg, total width: 1,050 mm, load per truss pair (max.): 3,500 kg, frame height: 10,500 mm, clear span: 2,700 mm, Rafdella Pallet Racking 10500x1050x120mm (USED) · 37 x upright Rafdella, blue, 3900x1050x120mm (approx. 14,000 kg) Sales price: €95.00 each excl. VAT Iedpfowhltrsx Aacstn · 198 x upright Rafdella, blue, 10500x1050x120mm (approx. 14,000 kg) Sales price: €210.00 each excl. VAT · 1465 x beam Rafdella, 2700x140x50mm, orange (load capacity approx. 3,500 kg) Sales price: €20.00 each excl. VAT For larger quantities, prices are available upon request! Call or email to inquire about availability and pricing. All prices exclude VAT Payment: Due upon delivery Ex stock Zutphen. Assembly/transport can be arranged if required. Inspection available at additional cost! Used items while stocks last. Bastell Warehouse Equipment BV Gerritsenweg 6 7202 BP Zutphen Specialist in: Pallet Racking Storage for Euro and block pallets up to 1,500 kg per pallet. Drive-In Racking Maximize use of your space when storing large quantities of the same SKU. Shelving Systems Ideal storage for light goods up to 250 kg per level. Also suitable for multi-tier shelving construction. Wide Span Shelving Storage for medium-weight goods up to 600 kg per level. Cantilever Racking For timber boards, pipes, etc.—ideal for unrestricted loading access. Flow Racking FIFO (First In, First Out) system, maximizes available space utilization. Mezzanine Floors Double your warehouse floor space! Multi-tier mezzanines available. Keywords: pallet racking - warehouse racking - warehouse equipment - warehouse - pallet - rack - Euro pallet - block pallet - euro - block - chep - dpb - rack - pallet racking - warehouse - warehouse racking - warehouse racks - racks - warehouse equipment - warehouse solutions - used - second-hand - cantilever racking - cantilever - shelving - shelf units - wide span shelving - wide span - tyre racking - used wide span shelving - new warehouse racking - used warehouse equipment - archive shelving - office furnishing - tyre racks - drive-in racking - mezzanine - mezzanine floors - nedcon - PR - NR - overtoom - feralco - vogelsang - vogelzang redirack - ramada - EAB - hovuma - jungheinrich - mecalux

Condition: good (used), Year of construction: 2002, operating hours: 2,259 h, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,980 mm, Manufacturer + model:SICHELSCHMIDT D 1216 ASM * EX * Atex - 2G / Zone 1 ID ; 24041.0745 Cat.:Used Mast:2F2900 Lowered height: 1980 mm Lifting height:2900 mm Capacity:1600 kg Year:2002 Hours:2259 hours Capacity:24 v / 460 ah Itjdpfsu Ec R Iex Aacsn Options:* EX * Atex - Sichelschmidt !!!! System FFZ - Typ ; D1216 ASM PTB 99 Y 3714 Gas = IIB Type = Cat 2G ( permitted in Zone 1 and 2 ) Temp class = 120 *CVery unique !!! - Wide span stacker with REACH mast - Cantilever adjustable forks - Side Shift !!!! - FFL mast with tilt function

Condition: repair required (used), Working cantilever motorized reel, maximum coil width 350 mm. Itedek T A Hdspfx Aacjn

Condition: good (used), functionality: fully functional, WE BUY YOUR SHELVES AND ACCESSORIES NATIONWIDE!!! We buy the following products nationwide: *Pallet racks *Industrial shelving *Shelf racks *Cantilever racks *Storage platforms *Drive-in racks Itsdewhwirspfx Aacon *Flow racks *Operational equipment *Conveyor systems We can disassemble the racks upon request.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: F32/16, ABUS EHB overhead crane crane runway with cantilever supports Dimensions approx. 8.2m x 4.8m, payload / lifting load 1x 250 KG - 0.25to Technical data of the system: Crane runway made from ABUS HB180 rails Approximate dimensions as follows: External dimensions - space requirement approx. 8.2m x 4.8m with 1 bridge 250KG payload Top supports 4.05m Top rail 3.88m UK running rail 3.70m Upper bridge 3.62m UK bridge 3.46m Hook height 3.05m Track width 3.8m Internal dimensions of supports 4.46 m Rail length 8.2m Iedpsmi S A Aofx Aacotn Bridge length 4.4m Base plate of the support 50x50cm Support HEA180 Support spacing 7.88m All supports can be set up variably. The system is delivered complete: ABUS HB rails, trolleys, end plates, cable drag, holder/hanger, chain hoist with control bottle, 4x supports, etc. Crane is dismantled and available immediately Inspection book is available Item location is 75053 Gondelsheim Almost new condition, see pictures There are 10 different systems available, please ask for your size! Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with Itedpfxjflpmde Aacjn 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Isdpfx Aehw Nfqoacstn Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: new, Holzkraft FKS 550-3200 PRO sliding table saw 5200550 Heavy-duty sliding table saw with scoring unit Saw blade tilt and height adjustment is manual Max. cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weight ensures vibration-free running Large cantilever table with material roller Rip fence with round bar guide Extendable aluminum longitudinal fence with two folding stops 7.5 kW main motor mounted on robust cast iron frame Quadruple-mounted format sliding carriage made of anodized aluminum with high torsional rigidity Multiple locking device on the sliding table Table widening and table extension made of strong sheet metal as standard equipment Large pendulum protection hood can be conveniently swung up by means of a gas pressure spring Saw blade clamping via tool-free Rapid system TECHNICAL DATA: Dimensions and weights Length (product) approx. 3386mm width/depth (product) approx. 3703mm Height (product) approx. 1330mm Weight (net) approx. 1102kg Connection suction Suction port diameter 120mm Suction port diameter saw blade guard 80mm Electrical data Supply voltage 400V Mains frequency 50Hz input power 7,5kW Output power 6kW Motor speed 2800min¯¹ Sliding carriage and table sliding table length 3200mm sliding table width 416mm height of sliding table 890mm Table length 1255mm Table width 685mm Itjdpskknaaefx Aacjn Noise emission Sound pressure level 96,5dB(A) Circular saw unit Cutting width with rip fence 1450mm Max. Cutting width to the left of the saw blade 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°200mm Max. cutting height Cutting height 45°140mm Diameter saw blade 550mm Speed saw blade 2800/3665/4800 min¯¹ Scoring unit Diameter scoring saw blade 120 - 130mm Speed scoring saw blade 8000min¯¹ Holkraft dealer - accessories available on request!

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned Itedpewa Tc Ssfx Aacjn • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Itodpfx Ajh Nx R Teacon Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Itjdjvxr Rgepfx Aacen

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Precision Tool Length Sensor Isdpfxjflprie Aacjtn 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector Ijdpjmhhy Nsfx Aacjtn 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Ijdpemhh Dtefx Aacstn 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.