Used Camshaft Milling Machine for sale (64,487)

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dsdsyg Dk Sepfx Afnskh Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: used, Year of construction: 2014, operating hours: 24,970 h, machine/vehicle number: 15175183974, Stock no.: 371400, travels X/Y/Z: 1,800x700x700 mm, max. workpiece weight: 1,500 kg, spindle speed: 20 - 8,000 rpm, tool holder: SK40, 60-position tool changer, machine weight: 13,250 kg, equipped with SIEMENS Sinumerik 840D sl control, electronic handwheel, chip conveyor, stock no.: 473100, hydraulic unit, with T-slot clamping table, approx. 210x70 cm, with integrated rotary table, zero-point clamping system, 4x NC vices HILMA NC 125, 1 GARANT Zeroclamp console Dsdpfx Ajyciunefnjkh

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dkjdpjydqrkofx Afnsh Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2018, x-travel 1.060 mm y-travel 600 mm z-travel 560 mm Control Heidenhain TNC 640 table dimensions 1.120 x 520 mm spindle tunring speed 12.000 U/min power capacity 11/31 kW tool taper SK 40 number of tool places 30 Pos. rapid traverse ( x / y / z ) 48/48/32 m/min weight of the machine ca. 6.850 kg auto power on hours ca. 9.848 h spindle hours ca. 2.854 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply, 20 bar - Oil separator - Prepared for 4th/5th axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Djdpfx Aoydqrdsfnjkh Prior sale reserved.

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg Dsdpfxeydqq Te Afnokh feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air Dsdsygtnaspfx Afnjkh • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, total height: 1,900 mm, total width: 1,850 mm, total length: 1,630 mm, Empty weight: 1.500 kg Dkodpsx Tu D Defx Afnjh - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 800 - Table width [mm]: 400 - Tool holder: ISO40 - Main spindle power [kW]: 2.2 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - Transport dimensions: 1630mm x 1850mm x 1900mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1973, Empty weight: 1.200 kg - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 1626 - Drive system: Conventional Dkodpfjwnihmjx Afnjh - Power [kW]: 1.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 640 - Y-axis travel [mm]: 405 - Z-axis travel [mm]: 435 - Table length [mm]: 1220 - Table width [mm]: 250 - Tool holder: ISO40 - Min. spindle speed [rpm]: 67 - Max. spindle speed [rpm]: 4600 - Options: Digital readout - └ Type of digital readout: ACURITE III - Transport weight [kg]: 1200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1987, total height: 2,200 mm, total width: 2,170 mm, total length: 1,720 mm, Empty weight: 2.650 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 776 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 12.8 - Number of axes [pcs]: 3 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 450 - Table length [mm]: 1250 - Table width [mm]: 315 - Tool holder: ISO40 - Min. spindle speed [rpm]: 56 Dksdpfxsx E Ug Ns Afnsh - Max. spindle speed [rpm]: 1800 - Options: Digital readout - └ Type of digital readout: ACU-RITE - Transport dimensions: 1720mm x 2170mm x 2200mm (l x w x h) - Transport weight [kg]: 2650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 Dkjdoygv Upspfx Afneh The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. Dkedjygv Shepfx Afnoh You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Dsdewdub Djpfx Afnokh Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. Dsdpfx Aju Ngfdsfnekh at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: good (used), Year of construction: 1991, machine/vehicle number: 60081, Universal Milling Machine AVIA - FNF 32 Dkjdoyhbizepfx Afnoh Travel X - 400 x Y - 340 x Z - 350 mm Table size 800 x 400 mm Spindle taper ISO 40 Spindle speeds 18 - 63 up to 3,150 rpm Feeds 18 steps, 10 to 500 mm/min Rapid traverse 1,600 mm/min Three-axis digital readout Mitutoyo Central lubrication system Coolant system Electrical values 400 V / 4 + 1.5 kW Required space L - 1,750 x W - 1,700 x H - 2,000 mm Weight approx. 1,500 kg Documentation available

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Djdpjh Axryefx Afnekh

Condition: excellent (used), Available: Immediately Dksdpfx Aoyh E A Aefnjh

Condition: good (used), Year of construction: 2005, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, Travel X/Y/Z 3000/3000/1000 mm, C-axis for turning operations, Table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, Angular head for side machining, 2.5° Hirth serration, Spindle speed up to 6,000 rpm, Spindle power 36 kW, Mount HSK 100, Tool changer for 30 tools, 3D measuring probe, Chip conveyor, Faceplate Ø 2000 mm, Dedpfsyhb Taex Afnokh Max. faceplate load 10,000 kg, Machine weight 45,000 kg.

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm Dsdpfx Aox U A Rnjfnskh z-travel 450 mm travel x vor 1000 mm control mc4va

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 x Djdpfx Afex U A Nqsnjkh

Condition: good (used), Year of construction: 2004, weight max. 1,5 t weight of the machine ca. 400 kg Dedpfx Afexylq Senjkh Accessories for a 4th axis machining center used on a HEDELIUS machine

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t Dkodewhqyqjpfx Afnoh

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Dkedpjuxfz Aefx Afnoh Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: used, Year of construction: 1990, Weight . kg Dedpjud Tr Rjfx Afnokh Year . content Rubintastkopf cbm

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t Dsdpfxsf Tdvbj Afnjkh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, x-travel 1500 mm y-travel 1000 mm z-travel 700 mm table: 1500 x 1000 mm control FIDIA weight of the machine ca. 11 t Dkodpfx Aoikn S Tefnjh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++